help identify unknown tool
#1
Member
Thread Starter
Join Date: Jul 2009
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
help identify unknown tool
ok so other day, i wanted to replace spokes on rear wheel...i took off wheel and removed ball bearings, only to discover that theres this weird shaped thing holding the gears on to the wheel...i had no tool to fit it...can you guys tell me the name of this tool? and are there many sizes for this tool? or is it universal?
#3
Senior Member
Join Date: Jul 2007
Posts: 2,114
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
First, why are you removing the balls to replace the spoke?
Second, it sounds like you have a cassette and need to remove the lockring. If so, then you need the cassette lockring tool. Most LBSs should have one to buy. Most likely it is the Shimano one, Park Tool FR-5. You will also need a chainwhip.
Second, it sounds like you have a cassette and need to remove the lockring. If so, then you need the cassette lockring tool. Most LBSs should have one to buy. Most likely it is the Shimano one, Park Tool FR-5. You will also need a chainwhip.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainMalick98
Electronics, Lighting, & Gadgets
7
06-05-12 05:36 PM