Finally found source of creaking noise
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: pacific northwest
Posts: 77
Bikes: Quiring ti road, '11 Salsa Vaya cross/touring/road, '83 Trek 520, '75 Centurion Semi-Pro, '95 Trek 1220, '87 Bianchi Grizzly, '05 Marin Riftzone
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Finally found source of creaking noise
After: re-installing b.b. 3 times, first with lube then with copper-based anti-sieze, then added teflon tape, and re-installing crank with more grease on the bolts and the spline, re-installing front derailleur with grease, re-installing all the chainring bolts with new grease, trying different wheels and pedals, cleaning and lubing seatpost and saddle, trying different skewers, re-installing headset and stem and bars with lubes and carbon anti-sieze, lubing chain, checking brakes, lubing and re-installing water boss screws, checking cleats.......I found the source of the creak: one of the two bolts that hold the rear derailleur hanger was not quite tight! Wow, what a hassle, but at least I didn't throw any money at the problem.
Thread
Thread Starter
Forum
Replies
Last Post
ed
Mountain Biking
11
07-30-10 08:08 AM