newbie need help picking a freewheel!!!
#1
Newbie
Thread Starter
Join Date: Sep 2010
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
newbie need help picking a freewheel!!!
i bought a KMC SL10X 10 speed chain intended for building a light ss bike, I can't find any single speed freewheel that will fit a 10 speed chain, I also bought a sram s100 ss crankset and it is compatible with 10 speed chain. I am looking for a freewheel that will fit the chain, any suggestions?? I am new to the cycling world and I don't know much about bike components
#2
Banned
Wrong Chain, Way wrong, over bought.. You need an 1/8" wide chain, probably ..
a 10 speed cassette has 10 cogs on it , and so you probably got the wrong crankset too too thin, and tooth profile is designed to shift off and onto.
all those Ramps pins and shortened teeth are shifting aides for the index systems.
see if you can exchange it for a Track Crank , or replace the thin aluminum chainring with a thicker one ..
I like Surly stainless steel Chainrings for single speed applications
the tooth profile is better as well as being more durable.
single speed stuff is thicker . 3/32 inch is more a 6,7,8 type chain if you need to adopt a derailleur chain..
but single speed by definition is not space limited , so a wide chain will be fine..
I use 3/32" chains on my Internal gear hub bikes ,
essentially a single speed drive train, externally.
a 10 speed cassette has 10 cogs on it , and so you probably got the wrong crankset too too thin, and tooth profile is designed to shift off and onto.
all those Ramps pins and shortened teeth are shifting aides for the index systems.
see if you can exchange it for a Track Crank , or replace the thin aluminum chainring with a thicker one ..
I like Surly stainless steel Chainrings for single speed applications
the tooth profile is better as well as being more durable.
single speed stuff is thicker . 3/32 inch is more a 6,7,8 type chain if you need to adopt a derailleur chain..
but single speed by definition is not space limited , so a wide chain will be fine..
I use 3/32" chains on my Internal gear hub bikes ,
essentially a single speed drive train, externally.
Last edited by fietsbob; 09-17-10 at 11:34 AM.
#3
LBS Employee/Commuter
Join Date: May 2008
Location: Madison Heights, MI
Posts: 243
Bikes: 2007 Trek Soho, 2010 Gary Fisher Monona w/ Xtracycle FreeRadical, 198X Facet BioTour 2000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You're probably not going to find one. Almost all freewheels and singlespeed cassette cogs run either a 1/8 or 3/32 sizing (single speed or 9 speed). The added weight between a basic 10speed chain and a basic singlespeed chain is barely anything. It'll be much easier to just get the right chain. Your 10speed compatible chainring shouldn't have a problem holding a 1/8 smoothly.
#4
Newbie
Thread Starter
Join Date: Sep 2010
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
can i buy a single 10 speed cog and somehow mount it to the hub and ride it as a fixed gear? is it possible? my rearwheel has a flip flop hub
#5
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
If you insist on using what you've already got I suppose it'd be possible to grind/file a 3/32 sprocket until it fits a 10 speed chain though.
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Find a good home for the 10-speed chain and buy the correct one.
#8
Senior Member
Join Date: Mar 2010
Location: City of Brotherly Love
Posts: 1,562
Bikes: Raleigh Companion, Nashbar Touring, Novara DiVano, Trek FX 7.1, Giant Upland
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A fixed gear chain needs to be stronger than a 10 speed chain bucause the braking force is generally much higher than the accelerating force.
Thread
Thread Starter
Forum
Replies
Last Post
saturnhr
Bicycle Mechanics
7
06-05-13 03:50 PM
dnomel
Bicycle Mechanics
9
07-11-11 11:38 PM
Germanicus
Singlespeed & Fixed Gear
6
04-27-10 02:35 PM