Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

what parts can or cant be sand blasted?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

what parts can or cant be sand blasted?

Old 10-18-10, 01:09 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
what parts can or cant be sand blasted?

Seat post
crank set
sprocket
break handle and break clamp part

Can all of those be sand blasted and powder coated?
MR.H is offline  
Old 10-18-10, 01:36 PM
  #2  
Senior Member
 
Join Date: Jan 2007
Location: Sacramento
Posts: 1,013
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Anything Aluminum can be PC yes. However for the best finish, I would not sandblast as it will ruin the surface condition.

Steel can be PC and blasted (sproket, yes) but the chain would chew up the finish pretty quickly.
Hirohsima is offline  
Old 10-18-10, 01:46 PM
  #3  
Ths Hipstr Kills Masheenz
 
cc700's Avatar
 
Join Date: Oct 2006
Location: seattle
Posts: 8,542

Bikes: tirove

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
media blasting will clear the surface and it won't damage it as much as sand.

also, most powdercoats are 6mil thick, which is more than enough to make your seatpost not fit anymore. you'd have to get a smaller seatpost and then powdercoat it, or coat it with anodization or another process that doesn't add significant material on top of the object.


also, BRAKENOTBREAK
cc700 is offline  
Old 10-18-10, 05:10 PM
  #4  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You got my point

But thanks for the input
MR.H is offline  
Old 10-19-10, 09:34 AM
  #5  
Senior Member
 
Join Date: Jun 2009
Posts: 332
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by cc700
media blasting will clear the surface and it won't damage it as much as sand.

also, most powdercoats are 6mil thick, which is more than enough to make your seatpost not fit anymore. you'd have to get a smaller seatpost and then powdercoat it, or coat it with anodization or another process that doesn't add significant material on top of the object.


also, BRAKENOTBREAK
For the seatpost.. Just mask off the bottom where it will be sitting in the seat-tube (wherever that may be for you). Bear in mind that it will not be able to be moved down unless you strip it, though. It seems, however, that it may be more worth it to anodize all these parts in a batch, it may be cheaper than powdercoating (Depending on where you go). Unless, of course, you absolutely want a flat color instead of a metallic one. Not to mention, it won't add any dimension to your parts. It will, however, reduce your parts a negligible amount.
leed is offline  
Old 10-19-10, 02:28 PM
  #6  
Senior Member
 
Join Date: Apr 2005
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Skip the tires. They don't do well with sandblasting.
jroth is offline  
Old 10-19-10, 10:51 PM
  #7  
Nü-Fred
 
ichitz's Avatar
 
Join Date: Jul 2009
Location: Brooklyn, NY
Posts: 1,517

Bikes: Torelli Tipo Uno (stolen), Peugeot Nice, Mercier Kilo TT

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
u really don't need to sand any of those parts.. If it's anodized, just de-anodize it.
If it's currently painted, i bought a origin8 stem once from an LBS but they only had black. So i took it home and stripped it. It's pretty fast and simple, plus no harm done to the parts.
ichitz is offline  
Old 10-20-10, 07:08 AM
  #8  
Senior Member
 
Bat56's Avatar
 
Join Date: May 2010
Location: St.Paul, MN
Posts: 1,822
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 4 Times in 3 Posts
I sand blasted my parts when I fell asleep at a nude beach when a wind storm kicked up.
Bat56 is offline  
Old 10-20-10, 12:36 PM
  #9  
One-track, one-speed mind
 
XianRL's Avatar
 
Join Date: Oct 2010
Location: Columbia, MO
Posts: 358

Bikes: Surly Karate Monkey, Schwinn Le Tour Luxe, Rustbelt Marco polo bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I talked to three or four sand blasters in St. Louis. They would gladly sand blast anything ($) but recommended getting only the frame sand blasted in preparation for powder coating. The powder coat places I talked to had done bikes before. They were adamant about doing only the frame and fork.

I would avoid powder coating the crank set. As Hiroshima said, there'll be a lot of chain wear on it.
XianRL is offline  
Old 10-20-10, 01:34 PM
  #10  
Ths Hipstr Kills Masheenz
 
cc700's Avatar
 
Join Date: Oct 2006
Location: seattle
Posts: 8,542

Bikes: tirove

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
it's easy to mask the 'fits to another thing' parts on a frameset. not so much on small parts. powdercoat is thick. thicker than a plastic painting dropcloth, so it will efffect fitment. also, you want someone who knows how to ream and face the edges that can't be masked. it's important.
cc700 is offline  
Old 10-20-10, 01:46 PM
  #11  
Senior Member
 
mihlbach's Avatar
 
Join Date: Dec 2005
Location: Long Island, NY
Posts: 6,642
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 124 Times in 66 Posts
Originally Posted by XianRL
I talked to three or four sand blasters in St. Louis. They would gladly sand blast anything ($)
That should be your first clue that you should disregard what they have to say. They probably have no idea how thin bicycle frame tubes are or if the frame will be structurally compromised as a result.
mihlbach is offline  
Old 10-20-10, 01:58 PM
  #12  
Your cog is slipping.
 
Scrodzilla's Avatar
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 100 Times in 58 Posts
It would most likely be less expensive to just replace the stuff you have with the color you want than paying a bunch of money to have your current components sandblasted, powder coated and potentially ruined.
Scrodzilla is offline  
Old 10-20-10, 03:55 PM
  #13  
Senior Member
 
mihlbach's Avatar
 
Join Date: Dec 2005
Location: Long Island, NY
Posts: 6,642
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 124 Times in 66 Posts
Originally Posted by Scrodzilla
It would most likely be less expensive to just replace the stuff you have with the color you want than paying a bunch of money to have your current components sandblasted, powder coated and potentially ruined.
Illegal post. BF rules require you to forfeit your common sense and logic when entering.
mihlbach is offline  
Old 10-21-10, 12:12 AM
  #14  
One-track, one-speed mind
 
XianRL's Avatar
 
Join Date: Oct 2010
Location: Columbia, MO
Posts: 358

Bikes: Surly Karate Monkey, Schwinn Le Tour Luxe, Rustbelt Marco polo bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by mihlbach
That should be your first clue that you should disregard what they have to say. They probably have no idea how thin bicycle frame tubes are or if the frame will be structurally compromised as a result.
They didn't tell me they would sand blast anything, I just expect that they would. As I said, they were adamant about doing the frame and fork. I saw first hand some of the work they did. Quality stuff. Great prices at one of them, too.
XianRL is offline  
Old 10-21-10, 10:57 AM
  #15  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Cost is not an issue here. The issue is how well will the parts fit together. I decided the front sprocket wont get powder coated but the arms will. Neither will the seat post.
MR.H is offline  
Old 10-21-10, 01:44 PM
  #16  
Your cog is slipping.
 
Scrodzilla's Avatar
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 100 Times in 58 Posts
Whatever.
Scrodzilla is offline  
Old 10-21-10, 07:20 PM
  #17  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Scrodzilla
Whatever.
Yup, whatever
MR.H is offline  
Old 10-21-10, 09:52 PM
  #18  
%#&*#%>?%
 
Build your own's Avatar
 
Join Date: Feb 2008
Location: Mass
Posts: 845

Bikes: Pake,Shogun,Nishiki,Motobecane

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I wish people would occasionally know what they're talking about on here.I've had thin sheetmetal stuff like like gas/oil tanks and fenders sandblasted with out any problems, a f***in' bicycle frame is gonna be fine.Same goes for any other parts.As far as PC, mask off where fit is critical.FWIW, i've painted chainrings before and the only wear occurs where the bushings meet the teeth.
Build your own is offline  
Old 10-22-10, 12:33 AM
  #19  
I just wanna ride
 
stryper's Avatar
 
Join Date: Oct 2008
Location: Chico Califo
Posts: 1,155

Bikes: 2013 BMC Impec

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
arms of a crank are no issue at all. I had my miche cranks done in black when i first got them. He taped off the bolt holes, and 2 years later I have had no problems or wear on it.
heck, I even had spokes done when i first got the bike. Made it a bit hard to get em through the hub, but it worked just fine and since they were done at the same time as the rims, they matched perfectly. I don't think i'd do it again, rather go with anodizing next time on spokes and rim, but it worked with no issue.
stryper is offline  
Old 10-22-10, 03:51 AM
  #20  
Senior Member
 
mihlbach's Avatar
 
Join Date: Dec 2005
Location: Long Island, NY
Posts: 6,642
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 124 Times in 66 Posts
Originally Posted by Build your own
I wish people would occasionally know what they're talking about on here.I've had thin sheetmetal stuff like like gas/oil tanks and fenders sandblasted with out any problems, a f***in' bicycle frame is gonna be fine.Same goes for any other parts.
Sandblasting is pretty harsh for lightweight road grade tubing. Are you sure you aren't talking about glass bead blasting?
Just because you can sandblast an oil/gas tanks or a fender does not mean that its wise to literally sandblast thin bicycle frame tubes. Bicycle frames are built to be as light as possible and still withstand tremendous loads, involving highly variable and complex combinations of tension, compression, and strain. The same cannot be said for tanks and fenders. Thinning the tubes slightly could significantly weaken the frame and shorten its lifespan. Just because a pro sand blaster (who needs work) says its OK, doesn't mean that it is unless they have lots of experience with bicycles, and even then I would have reservations. I may have less hesitation about sandblasting a cheap gas pipe plain-gauge frame, but I'm not sure the expense would be worth it on a low quality frame.

Last edited by mihlbach; 10-22-10 at 03:54 AM.
mihlbach is offline  
Old 10-23-10, 06:13 PM
  #21  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Mihl, i understand what you are saying. I figured litera "sand" blasting would be to harsh on the metal work so I have been using a different medium, silicon i think.
MR.H is offline  
Old 10-23-10, 06:23 PM
  #22  
Your cog is slipping.
 
Scrodzilla's Avatar
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 100 Times in 58 Posts
Wait...why is this even posted in SSFG?

Moving to the Mechanics forum, for lack of a better home.
Scrodzilla is offline  
Old 10-23-10, 06:56 PM
  #23  
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
bear in mind seatpost gets bigger with the layer of powdercoat.
I got a powdercoated handlebar,[ITM Trekking bar] ..

and had to remove PC to fit a Rohloff gripshifter on.
OD with coating was 22.5mm .
fietsbob is offline  
Old 10-23-10, 08:33 PM
  #24  
Senior Member
 
xizangstan's Avatar
 
Join Date: Aug 2010
Location: Colorado-California-Florida-(hopefully soon): Panama
Posts: 1,059

Bikes: Vintage GT Xizang (titanium mountain bike)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Just sell the thing and buy yourself a new bike. Bicycle salesmen need to pay their bills, too.
xizangstan is offline  
Old 10-23-10, 08:38 PM
  #25  
Senior Member
 
xizangstan's Avatar
 
Join Date: Aug 2010
Location: Colorado-California-Florida-(hopefully soon): Panama
Posts: 1,059

Bikes: Vintage GT Xizang (titanium mountain bike)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Bat56
I sand blasted my parts when I fell asleep at a nude beach when a wind storm kicked up.
And the result is, you can't beat it!
xizangstan is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.