FYI - For those of you who like the Stronglight A9 needle bearing headset...
#1
Senior Member
Thread Starter
FYI - For those of you who like the Stronglight A9 needle bearing headset...
__________________
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
Looks like a decent price, too!
#4
Senior Member
Thread Starter
ColonelJLoyd, Thats the one I went with last year when I couldn't find a Stronglight. So far its been a good headset with one small issue. After about a 1000 miles it loosens up a little bit and then it starts creaking, and on my Cannondale it sounds like the stem is about to break off. I tighten it up a little bit and all is well. You should enjoy it.
This year they polished it up and raised the price about $10 though.
This year they polished it up and raised the price about $10 though.
__________________
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
#5
commuter
Join Date: Mar 2010
Posts: 536
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
a friend of mine has a VO threaded headset. it's crap.
get a tange levin, campagnolo record...or track down an old stronglight, instead.
get a tange levin, campagnolo record...or track down an old stronglight, instead.
Last edited by TimeTravel_0; 11-09-10 at 11:45 AM.
#7
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
The newest Stronglight A9s have sealed bearing cartridges now, and I have it on one of my bikes close to a year already. Decided to get it because NOS a9s with the needle bearings are getting way too expensive lately, if you can find them. The new A9 only cost me like 42 bucks shipped from a UK seller.
It did loosen a little bit after a few miles but since then the cartridges "bedded down good" after just one readjustment. It's functioning nice and smoothly so far without anymore signs of loosening, so I guess it will be good for the long run. I do put just a smidgen of tension into A9 headsets (needle bearing and this new cartridge bearing versions) when I install them without causing any problems. These A9s will never feel as free rolling as loose ball bearing headsets would when adjusted properly. The one on my Peugoet is still the original that came with the bike and has been working without any signs of looseness or wear since 1984. I only adjust it when I tear it open for cleaning an lube. Then, always just a single readjustment after a few miles.
I guess what I'm saying is, the new and old Stronglight A9s are definitely not crap too!!
Chombi
It did loosen a little bit after a few miles but since then the cartridges "bedded down good" after just one readjustment. It's functioning nice and smoothly so far without anymore signs of loosening, so I guess it will be good for the long run. I do put just a smidgen of tension into A9 headsets (needle bearing and this new cartridge bearing versions) when I install them without causing any problems. These A9s will never feel as free rolling as loose ball bearing headsets would when adjusted properly. The one on my Peugoet is still the original that came with the bike and has been working without any signs of looseness or wear since 1984. I only adjust it when I tear it open for cleaning an lube. Then, always just a single readjustment after a few miles.
I guess what I'm saying is, the new and old Stronglight A9s are definitely not crap too!!
Chombi