Swapping derailleur setup for Shimano 8 speed hub. What do I need to know?
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: Sydney Australia
Posts: 16
Bikes: 1984 Centurion Accordo, 1989 MTB custom built
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Swapping derailleur setup for Shimano 8 speed hub. What do I need to know?
Hi there
I have a 1980s 12 speed mixte I'm going to have converted to a Shimano 8 speed hub gearset. I've bought the Shimano kit including cables etc and am waiting for it to arrive.
What I need to know is, what else do I need to replace? Do I need a new chain? A new chainring? If I need a new chainring, how many teeth should the replacement chainring have? Will I therefore need new cranks or crank arms?
I'm no mechanic so any help would be appreciated. I won't be doing the conversion myself (heck, I wouldn't want to ride a bike that I'd worked on! ) but want to be able to source the parts myself to make this little bike look pretty special as well as ride like a dream.
I've put a pic of my bike below so anyone who wants to help can see the existing situation. I believe my dropouts are horizontal enough for the hub setup to work just fine.
Hope some of you can offer advice!
Kind regards
Fergie
I have a 1980s 12 speed mixte I'm going to have converted to a Shimano 8 speed hub gearset. I've bought the Shimano kit including cables etc and am waiting for it to arrive.
What I need to know is, what else do I need to replace? Do I need a new chain? A new chainring? If I need a new chainring, how many teeth should the replacement chainring have? Will I therefore need new cranks or crank arms?
I'm no mechanic so any help would be appreciated. I won't be doing the conversion myself (heck, I wouldn't want to ride a bike that I'd worked on! ) but want to be able to source the parts myself to make this little bike look pretty special as well as ride like a dream.
I've put a pic of my bike below so anyone who wants to help can see the existing situation. I believe my dropouts are horizontal enough for the hub setup to work just fine.
Hope some of you can offer advice!
Kind regards
Fergie
Thread
Thread Starter
Forum
Replies
Last Post
Philphine
Bicycle Mechanics
9
07-25-11 12:38 PM
FergieGirl
Bicycle Mechanics
8
11-10-10 04:44 PM