BB tool 20-spline question
Hi,
I have a sealed shimano cartridge splined BB. Can a BB tool use to remove Octalink/Isis type be used? I saw on the Shimano tech doc it seems that the same tool (UN74S) to remove a UN26 can be used for a 105 Octalink type. Therefore I am thinking a splined sealed cartridge shares the same notch format as the Octalink/Isis BB. Please confirm. thanks! The BB tool in question is this http://www.filzer.com/products.php?id=40 http://www.filzer.com/img/products/40-lg.jpg |
The spline interface is the same but Octolink/ISIS spindles are wider than square taper spindles so some older tools designed for square taper won't fit over an Octolink/ISIS spindle.
|
Originally Posted by Bezalel
(Post 11873311)
The spline interface is the same but Octolink/ISIS spindles are wider than square taper spindles so some older tools designed for square taper won't fit over an Octolink/ISIS spindle.
|
I see. So Octa/Isis tool should therefore automatically fit the square-tapered spline BB then because it is larger interior wise. Correct?
thanks. |
Originally Posted by |3iker
(Post 11874317)
I see. So Octa/Isis tool should therefore automatically fit the square-tapered spline BB then because it is larger interior wise. Correct?
thanks. |
All times are GMT -6. The time now is 11:42 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.