Homemade Wheel Truing Stand Ideas?
#1
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Montereyish
Posts: 2,306
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Homemade Wheel Truing Stand Ideas?
I've seen were some have used an old fork and quick-ties for a spot truing stand, but now I can't find any links to images of how they mounted the fork to a stable base. Any of you made a truing stand? I can't bring myself to spending money on something that I could make at home.
#2
Member
Join Date: Nov 2008
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
https://www.bikeforums.net/showthread...our-own-wheels
Pull this up and scroll down and there's a good photo of a homemade truing stand of excellent design. I have and use one almost exactly like it. The design and plans for it came out of an excellent online book about wheel building by Roger Musson: https://www.wheelpro.co.uk/wheelbuilding/book.php
The price for downloading is around $14-$15. It's the best book on wheel building I've seen. Very straight forward and instructive. The materials for the truing stand cost me under $10.
Pull this up and scroll down and there's a good photo of a homemade truing stand of excellent design. I have and use one almost exactly like it. The design and plans for it came out of an excellent online book about wheel building by Roger Musson: https://www.wheelpro.co.uk/wheelbuilding/book.php
The price for downloading is around $14-$15. It's the best book on wheel building I've seen. Very straight forward and instructive. The materials for the truing stand cost me under $10.
Last edited by magdelin9; 02-19-11 at 05:26 PM. Reason: decided to add last sentence
#4
Bill
Join Date: May 2007
Location: HIGHLANDS RANCH, CO
Posts: 630
Bikes: Specialized Globe Sport, Specialized Stumpjumper FSR Pro
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
+1 on Musson's e-book. Chapter 3 on tools has plans for making one.
#5
Senior Member
Join Date: Mar 2010
Posts: 919
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Turn the bike upside down. Use the frame and a few zip-ties cut to length. Cut a square notch at the end of the large zip-tie to measure axial and radial run-outs. Use the frame/fork to center the dish.
#6
Banned
I took a length of angle iron, 2x2, leaving part of the flange
to clamp in a bench vise , cut off the rest of the flange to make it flat,
bent those up 90 degrees to be parallel.
then cut a V notch in the ends for the axle..
Bolted on another piece of flat metal, bent, on the end
bolted to the U upright
to that I can fit spring clamps for the reference point sideways ..for lateral truing.
the L shaped piece itself serves as a circularity reference.
You could use steel [cutting head burns off the flange quickly]
Or aluminum for this,
aluminum cuts with a hacksaw
in a reasonable length of time..
to clamp in a bench vise , cut off the rest of the flange to make it flat,
bent those up 90 degrees to be parallel.
then cut a V notch in the ends for the axle..
Bolted on another piece of flat metal, bent, on the end
bolted to the U upright
to that I can fit spring clamps for the reference point sideways ..for lateral truing.
the L shaped piece itself serves as a circularity reference.
You could use steel [cutting head burns off the flange quickly]
Or aluminum for this,
aluminum cuts with a hacksaw
in a reasonable length of time..
Last edited by fietsbob; 02-19-11 at 08:12 PM.
#7
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Montereyish
Posts: 2,306
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thanks everyone for the responses, especially about the Musson's book. I've built one new wheelset at a shop, but have a bunch of vintage mismatched wheels that I would like to tinker around with at home.
#8
Junior Member
:shrug: I've just used the brake pads as a guide when its gotten bad. Always worked ok for me
#9
Member
Join Date: Nov 2010
Location: Minnesota
Posts: 28
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I found this link on the vintage trek website. It isn't free (it says...build a wheel building stand for under $100), but I wonder if anyone has tried this or has any opinions.
https://www.chc-3.com/pub/wheel_stand.htm
https://www.chc-3.com/pub/wheel_stand.htm