SRAM Crank and BB interchangeability
02-27-11, 10:25 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2009
Location: SFV
Posts: 128
Bikes: Bianchi Pista
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
SRAM Crank and BB interchangeability
I am wondering if the SRAM track setup (Omnium + GXP BB) would be interchangeable with their road setups (Force, Red, cranks + BB). The reason I ask is I am looking into the idea of installing one of their road cranks onto my single speed Bianchi Pista. Would this be feasible? I am asking here in the mechanics forum as I figured you guys would be the most knowledgeable.
02-27-11, 11:05 AM
#2
46 bikes and counting...
Join Date: Sep 2008
Location: Under your LBS...
Posts: 107
Bikes: 1992 Trek multitrack 700 sourgrape with red decals, 1992 Trek multtrack 700 (with 1" threadless conversion), 2009 jamis Aurora Elite, 2007 Jamis Cross Country 2.0, 1981 Trek 613, 1980's Fuji "Redlof" folding bike, Iron Horse AT-70 with 48cc motor....
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bottom brackets and cranks are one of those wonderful things about bicycles that have been standardized (mostly). You should have no problem installing what ever crank setup you want on your Pista. Those here will be sure to remind you that it is important to make sure your chainline is maintained, i.e. make sure your new chainring doesn't pushout/pullin your chain more than it was. IT may take some trial and error to setup the chainline
Last edited by Tentacle Master; 02-27-11 at 11:10 AM.
