Join Date: Apr 2009
Location: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 28 Post(s)
Tagged: 1 Thread(s)
Quoted: 1153 Post(s)
BTW- your photo was from so close up that I can't be sure if it's a problem or a result of the exaggerated perspective. But don't be too surprised if the tool won't fit over the locknut.
In any case, be sure to lock the tool firmly to the freewheel with the axle nut, lest it slip and break a prong. Once you've broken the freewheel loose (lots of torque needed) stop and loosen the axle nut to give the freewheel room to move out on the thread.
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions”
- Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance