Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Who might sell a 27" wheel w/8,9,10 freehub rather than a freewheel

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Who might sell a 27" wheel w/8,9,10 freehub rather than a freewheel

Thread Tools
 
Search this Thread
 
Old 03-12-11, 01:58 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Apr 2009
Location: Santa Fe, New Mexico & San Juan Del Sur, Nicaragua
Posts: 20

Bikes: '72 Colnago, 84 Trek 600, 87 Specialized Sirrus, 87 Specialized Rockhopper, '04 Cannondale Optima, '06 Motobecane 600HT, 08 Motobecane Single Speed

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Who might sell a 27" wheel w/8,9,10 freehub rather than a freewheel

I have a Trek 510 frame, I'd like to put on 27" wheels rather than 700c's.
I also want to use some 9-speed brifters from the stockpile.
I'd like to use a freehub and cassette but all the 27" wheels I've seen are built with thread on freewheels.
Anyone know where I could look for this Dino/Modern combination, or do I need to build them myself?
ColKrenzer is offline  
Old 03-12-11, 02:50 PM
  #2  
Senior Member
 
bikeman715's Avatar
 
Join Date: Mar 2008
Location: Salinas , Ca.
Posts: 2,646

Bikes: Bike Nashbar AL-1 ,Raligh M50 , Schwinn Traveler , and others

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 2 Times in 2 Posts
you need to build one for yourself. as far it goes for your bike the 27 might not fit. Check spacing in the frame and the reach of your brakes. ( 700 c are a little smaller than 27 " ) .
bikeman715 is offline  
Old 03-12-11, 02:57 PM
  #3  
Senior Member
 
Join Date: Aug 2010
Location: Washington
Posts: 472

Bikes: Serotta Davis Phinney, 1992 Serotta T Max,1984 Specialized Allez, Olmo, 1974 Strawberry,Redline bmx, ect.,

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
700c wheels are more user friendly and readily available for your build, and will give you more clearance will take big tires and fenders as well.
nwbikeman is offline  
Old 03-12-11, 03:15 PM
  #4  
Senior Member
 
mrrabbit's Avatar
 
Join Date: Dec 2007
Location: San Jose, California
Posts: 3,504

Bikes: 2001 Tommasini Sintesi w/ Campagnolo Daytona 10 Speed

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Likes: 0
Liked 35 Times in 30 Posts
If the OP were to be very meticulous in his search efforts using Google, Yahoo or Bing...and be willing to do 4-5 pages in depth...he will find that two people do so.

=8-)
__________________
5000+ wheels built since 1984...

Disclaimer:

1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:

Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
mrrabbit is offline  
Old 03-12-11, 04:36 PM
  #5  
Real Men Ride Ordinaries
 
fuzz2050's Avatar
 
Join Date: Sep 2008
Posts: 3,723
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
9 speed and 27 inch tires seem a little incongruous to me. I can understand the appeal of 27 inch tires, they are cheap and available everywhere (even Walmart), but 9 speed is rare, only available through bike shops, and being phased out.
fuzz2050 is offline  
Old 03-12-11, 05:17 PM
  #6  
Senior Member
 
mrrabbit's Avatar
 
Join Date: Dec 2007
Location: San Jose, California
Posts: 3,504

Bikes: 2001 Tommasini Sintesi w/ Campagnolo Daytona 10 Speed

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Likes: 0
Liked 35 Times in 30 Posts
Originally Posted by fuzz2050
9 speed and 27 inch tires seem a little incongruous to me. I can understand the appeal of 27 inch tires, they are cheap and available everywhere (even Walmart), but 9 speed is rare, only available through bike shops, and being phased out.
8,9,10 speed freehubs are not rare...

Key word = freehub

=8-)
__________________
5000+ wheels built since 1984...

Disclaimer:

1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:

Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
mrrabbit is offline  
Old 03-12-11, 05:54 PM
  #7  
Junior Member
Thread Starter
 
Join Date: Apr 2009
Location: Santa Fe, New Mexico & San Juan Del Sur, Nicaragua
Posts: 20

Bikes: '72 Colnago, 84 Trek 600, 87 Specialized Sirrus, 87 Specialized Rockhopper, '04 Cannondale Optima, '06 Motobecane 600HT, 08 Motobecane Single Speed

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Mrrabbit - I see you have built a few wheels! Who would you recommend as an online source of rims, spokes & hubs? Thanks.
ColKrenzer is offline  
Old 03-12-11, 05:58 PM
  #8  
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
Why 27"? Even Wal-Mart has 700C tires in a pinch.
davidad is offline  
Old 03-12-11, 06:04 PM
  #9  
Junior Member
Thread Starter
 
Join Date: Apr 2009
Location: Santa Fe, New Mexico & San Juan Del Sur, Nicaragua
Posts: 20

Bikes: '72 Colnago, 84 Trek 600, 87 Specialized Sirrus, 87 Specialized Rockhopper, '04 Cannondale Optima, '06 Motobecane 600HT, 08 Motobecane Single Speed

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
bikeman715, the Trek 510 frame came with 27's back in '84 and you're right, they are a little bigger than the 700's, about 8mm I think. My stockpile also has a nice pair of 105 brakes I'd like to use, but the reach is too short for 700c's, so I'm looking at possibilities. Thanks
ColKrenzer is offline  
Old 03-12-11, 06:05 PM
  #10  
Flying Under the Radar
 
X-LinkedRider's Avatar
 
Join Date: Oct 2007
Location: Northeast PA
Posts: 4,116

Bikes: 10' SuperiorLite SL Club | 06' Giant FCR3 | 2010 GT Avalanche 3.0 Disc

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I agree with everyone else saying what is the purpose of using 27" wheels? only going to cause more trouble in the future. But if your set on it.

https://www.jensonusa.com/store/produ...Freewheel.aspx
X-LinkedRider is offline  
Old 03-12-11, 06:14 PM
  #11  
cowboy, steel horse, etc
 
LesterOfPuppets's Avatar
 
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,835

Bikes: everywhere

Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12767 Post(s)
Liked 7,680 Times in 4,076 Posts
There are also 9-speed freewheels available.
https://aebike.com/page.cfm?action=de...=30&SKU=FW2131

EDIT: Ooops, didn't realize previous post was practically identical, since I didn't click link.

Last edited by LesterOfPuppets; 03-12-11 at 06:37 PM.
LesterOfPuppets is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
phenry24
Classic & Vintage
32
04-26-15 08:05 AM
dr1445
Bicycle Mechanics
17
10-18-14 12:04 PM
agchopz
Bicycle Mechanics
4
07-11-14 08:50 AM
joedab
Touring
16
03-05-13 01:24 PM
bobotech
Classic & Vintage
11
03-09-12 12:27 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.