Lady Centurion Bike BB removal tool
 

Hi,
I would like to dissasemble this BB, to service it.
What tool do I need to buy to do this job?
I did search the Park Tool site, but didn't find this 6 notches tool.
I do have the crank arm puller. I just need the special wrench for the
two sides cups.

Thanks,
Kfir

Left side 6 notches locker ring:
http://i183.photobucket.com/albums/x...PICT1856-1.jpg

Drive side:
Sorry for the picture, but there are two notches that makes this ring
rectangular.
http://i183.photobucket.com/albums/x...e/PICT1857.jpg

Ok,
Looking again at the park website I found the green pin spanner.
http://www.parktool.com/product/pin-spanner-green
The bottom bracket in the picture seems like my case.
Do I need another spanner with this tool?

Regards,
Kfir

in addition to the pin spanner you will need a bb lockring tool or lockring pliers and a fixed bb cup tool

You may note that servicing that bottom bracket does not require removing the fixed cup.

http://www.parktool.com/product/cran...t-wrench-HCW-5

or something like it for the lock ring.

could that be why it is called a "fixed cup"??

I have just ordered this spanner and the green spanner. Hope it will suffice.

Can you provide a link for reading how to service this bottom bracket? Or maybe a search term in Google?

Thanks,
Kfir

"Loose bearing bottom bracket" ought to find a couple zillion pages. This should be all you need:
http://www.parktool.com/blog/repair-...racket-service

Your BB old school, but that's what I learned on. I could probably rebuild one blindfold.

Thanks Jeff,
This is what I needed.

Regards,
Kfir