Chorus 10 speed triple crank & 8 speed chorus rear
05-10-11, 06:20 PM
#1
Senior Member
Thread Starter
Chorus 10 speed triple crank & 8 speed chorus rear
Has anyone used a Campy Chorus 10 speed triple crank with a Campy Chorus 8 speed rear? I am currently using my mt bike triple, but 46-36-26 is a little too low.
05-10-11, 07:19 PM
#2
Banned
Not that exact combination, you will have to allow a long time,
for a very narrow band of respondents then..
I use the prior name from Campag , 'race triple' a 50,40, I put a 24 on..
instead of the 30..
any body want Campag 30t/74 bcd chainrings?
the last remaining <C> square taper bb/arm connection.
add a triple FD, wider back plate, and a use their 111 BB for 9/8" seat tubes
115 for oversize seat tubes. ..
for a very narrow band of respondents then..
I use the prior name from Campag , 'race triple' a 50,40, I put a 24 on..
instead of the 30..
any body want Campag 30t/74 bcd chainrings?
the last remaining <C> square taper bb/arm connection.
add a triple FD, wider back plate, and a use their 111 BB for 9/8" seat tubes
115 for oversize seat tubes. ..
Last edited by fietsbob; 05-10-11 at 07:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Barrettscv
Bicycle Mechanics
7
01-23-10 06:41 PM
