What's this little doohickie for on a mid-1980's (I think) Miyata 310?
#1
Full Member
Thread Starter
Join Date: Jul 2005
Posts: 349
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
What's this little doohickie for on a mid-1980's (I think) Miyata 310?
I've been working on this vintage Miyata 310 and noticed this projection on the rear stay.
There's only one. None on the contralateral stay.
See photos.
There's only one. None on the contralateral stay.
See photos.
#2
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,938
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1283 Post(s)
Liked 1,836 Times
in
1,110 Posts
It is a chain hanger for removing the rear wheel when changing a flat tire or removing the wheel for other reasons. Smiles, MH
Likes For Mad Honk:
#4
Senior Member
Likes For Dirk de Chablis:
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,792 Times
in
2,271 Posts
As mentioned a chain peg but IMO on the wrong tube. Andy
__________________
AndrewRStewart
AndrewRStewart
#6
Senior Member
That’s a very strange place for the “chain peg” IMHO too but could allow for letting the chain settle on the small cog before pulling the axle up into the vertical dropouts .
Last edited by sovende; 03-06-21 at 04:54 PM.
#7
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Your fingers stay cleaner w/ the location on Andy's frame.
#8
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
This question pops up about once every 1.5 years. Back in 2017 it was my turn to ask.
What is this?
Mine too is on the seat stay and you have to get your fingers dirty to use it. Seems the like lower on the stay would be better so you can snag it while dropping the wheel. Or as others have theirs, on the chain stay. I've never used one though.
I guess I could remove it and save some weight! <grin>
What is this?
Mine too is on the seat stay and you have to get your fingers dirty to use it. Seems the like lower on the stay would be better so you can snag it while dropping the wheel. Or as others have theirs, on the chain stay. I've never used one though.
I guess I could remove it and save some weight! <grin>
#9
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times
in
2,325 Posts
It’s bent!
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#10
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,792 Times
in
2,271 Posts
These seat stay located chain pegs are often bent and/or really scrapped up as many forget to remove the chain from the peg before trying to ride off.
The chain stay located versions are positioned so that the chain falls onto them during wheel removal (chain on smallest cog) and then holds the chain "open" to receive the small cog on reinstalling the wheel. No hands and auto correcting. I got the idea form the 1973? Fuji Finest which had a clamp on chain stay cable stop with a fin running across the stay and under the chain. Columbine later offered a braze on chain peg (although more like a shelf as it was a stamped and bent piece of steel). Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#11
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,291
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,910 Times
in
1,884 Posts
These seat stay located chain pegs are often bent and/or really scrapped up as many forget to remove the chain from the peg before trying to ride off.
The chain stay located versions are positioned so that the chain falls onto them during wheel removal (chain on smallest cog) and then holds the chain "open" to receive the small cog on reinstalling the wheel. No hands and auto correcting. I got the idea form the 1973? Fuji Finest which had a clamp on chain stay cable stop with a fin running across the stay and under the chain. Columbine later offered a braze on chain peg (although more like a shelf as it was a stamped and bent piece of steel). Andy
The chain stay located versions are positioned so that the chain falls onto them during wheel removal (chain on smallest cog) and then holds the chain "open" to receive the small cog on reinstalling the wheel. No hands and auto correcting. I got the idea form the 1973? Fuji Finest which had a clamp on chain stay cable stop with a fin running across the stay and under the chain. Columbine later offered a braze on chain peg (although more like a shelf as it was a stamped and bent piece of steel). Andy
Knowing some manufacturers, that "sealed cartridge" might be designed into the frame & somehow integrated into the der hanger as a nonreplaceable item. Need to replace that high speed peg? No problem! $4,000. or a new like replacement bicycle.... $4,195.85.
__________________
-Oh Hey!
-Oh Hey!
#12
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times
in
2,325 Posts
These seat stay located chain pegs are often bent and/or really scrapped up as many forget to remove the chain from the peg before trying to ride off.
The chain stay located versions are positioned so that the chain falls onto them during wheel removal (chain on smallest cog) and then holds the chain "open" to receive the small cog on reinstalling the wheel. No hands and auto correcting. I got the idea form the 1973? Fuji Finest which had a clamp on chain stay cable stop with a fin running across the stay and under the chain. Columbine later offered a braze on chain peg (although more like a shelf as it was a stamped and bent piece of steel). Andy
The chain stay located versions are positioned so that the chain falls onto them during wheel removal (chain on smallest cog) and then holds the chain "open" to receive the small cog on reinstalling the wheel. No hands and auto correcting. I got the idea form the 1973? Fuji Finest which had a clamp on chain stay cable stop with a fin running across the stay and under the chain. Columbine later offered a braze on chain peg (although more like a shelf as it was a stamped and bent piece of steel). Andy
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#13
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,291
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,910 Times
in
1,884 Posts
i agree. Kinda like MS Excel. A lot of very helpful functions, but it's only used for the basic functions.. like playing Ski Free.
__________________
-Oh Hey!
-Oh Hey!