Repairing the chain without using the chain tool
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Repairing the chain without using the chain tool
I was removing my chain for the first time and of course I screwed up in that I removed the bolt completely. Now I want to put it back together, but I used a multitool chain tool (alien II) which can't put the bolt back in when it's been removed completely, and the bolt can't be forced in with bare hands. What do I do?
#2
Senior Member
Join Date: Oct 2002
Location: Medway, MA
Posts: 2,727
Bikes: 2011 Lynskey Sportive, 1988 Cannondale SM400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
On modern chains, you aren't supposed to re-use the pins once they have been removed. Shimano uses a special pin for this purpose, while SRAM, KMC and Wippermann all use a special "quick link" to connect the chain.
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,713
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5781 Post(s)
Liked 2,578 Times
in
1,429 Posts
As Demoncyclist said you aren't supposed to push pins back and forth to open and close chains on anything more modern than a 20 year old 6 speed chain. You might have done yourself a favor, in preventing a broken chain while you had maximul load on the pedals.
In any case the solution to your problem is easy, push out the corresponding pin on the other end of the outer plates, so your chain ends with inner links at both ends, and buy a connecting link made by Sram, KMC, or Wippermann, the right width for your chain, ie. 7s, 8s, 9s, 10s etc. You might buy a spare at the same time so you can do an emergency splice on the trail the same way.
From here forward cut with a chain tool, splice with a connector.
In any case the solution to your problem is easy, push out the corresponding pin on the other end of the outer plates, so your chain ends with inner links at both ends, and buy a connecting link made by Sram, KMC, or Wippermann, the right width for your chain, ie. 7s, 8s, 9s, 10s etc. You might buy a spare at the same time so you can do an emergency splice on the trail the same way.
From here forward cut with a chain tool, splice with a connector.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#4
Banned
One of my friends banged the broken chain back together with a nail and a rock.
He was in the foothills of the Argentine Andes at the time.
He was in the foothills of the Argentine Andes at the time.
#5
Senior Member
Join Date: Jun 2007
Location: A Coffin Called Earth. or Toronto, ON
Posts: 12,257
Bikes: Bianchi, Miyata, Dahon, Rossin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
you need something to press it in, like a press machine or something.
__________________
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
#6
Junior Member
Thread Starter
Join Date: Aug 2011
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As Demoncyclist said you aren't supposed to push pins back and forth to open and close chains on anything more modern than a 20 year old 6 speed chain. You might have done yourself a favor, in preventing a broken chain while you had maximul load on the pedals.
In any case the solution to your problem is easy, push out the corresponding pin on the other end of the outer plates, so your chain ends with inner links at both ends, and buy a connecting link made by Sram, KMC, or Wippermann, the right width for your chain, ie. 7s, 8s, 9s, 10s etc. You might buy a spare at the same time so you can do an emergency splice on the trail the same way.
From here forward cut with a chain tool, splice with a connector.
In any case the solution to your problem is easy, push out the corresponding pin on the other end of the outer plates, so your chain ends with inner links at both ends, and buy a connecting link made by Sram, KMC, or Wippermann, the right width for your chain, ie. 7s, 8s, 9s, 10s etc. You might buy a spare at the same time so you can do an emergency splice on the trail the same way.
From here forward cut with a chain tool, splice with a connector.
#7
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#8
Senior Member
Join Date: Apr 2011
Location: Arizona
Posts: 438
Bikes: Raleigh Venture 3.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you are going to be opening the chain more than once, get one of those master link thingies. (Yes... That is a technical term.)
#9
Senior Member
Join Date: Jun 2011
Location: Westlake
Posts: 168
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The KMC Quick Link is reuseable per KMC. Just don't reuse them between chains, buy a new one when you replace your chain (or buy a KMC chain, which comes with it).