Easier Gearing on my Trek 2.3 (50/34 and 11-28)
09-08-11, 07:05 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Easier Gearing on my Trek 2.3 (50/34 and 11-28)
I'm getting into road biking, but I'm not in great shape yet. I have a compact duo crankset, but I would like to have easier gearing available for hills. It appears that switching to a triple crank entails more than I want to tackle, but I would like to know whether I can replace the 34t front front chain ring or replace the cassette in the back to provide for easier gearing. Thank you.
My bike is here:
https://www.trekbikes.com/us/en/bikes...d_1_series/2_3
Crank:
Shimano 105, 50/34 (compact)
Cassette:
Shimano 105 11-28, 10 speed
My bike is here:
https://www.trekbikes.com/us/en/bikes...d_1_series/2_3
Crank:
Shimano 105, 50/34 (compact)
Cassette:
Shimano 105 11-28, 10 speed
09-08-11, 07:10 PM
#2
Kittery Maine / NC
Join Date: Aug 2011
Posts: 175
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am by no means an expert, but I just switched out my freewheel for the same reason. I moved from So Florida flat land to the Manie mtns and it was killing me. The lbs put larger gears in back and it is much better. My bike is vintage so it is a freewheel and not a cassette, but both are easy. Cost like 35 bucks with install and adjustment. Others here may provide better insight.
09-08-11, 07:35 PM
#3
Senior Member
Join Date: Aug 2011
Location: Bay Area, CA
Posts: 148
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It is easier and probably cheaper to replace the cassette. Then you don't have to get a new front shifter/derailleur.
Last edited by 8Fishes; 09-08-11 at 07:38 PM.
09-08-11, 07:56 PM
#4
Senior Member
Get a 10sp mtn cassette -- 11-34 or even 12-36 -- and a Shimano 9sp mtn derailleur. Those will play nice with your 105 10sp shifter. Your shop should be able to hook you up with parts and install, probably $200 ballpark with 105 equivalent mtn components.
09-08-11, 07:58 PM
#5
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
jffielde: You can change to a cassette with larger cogs but you will need to ensure that the rear derailleur can both handle the new largest cog AND wrap a sufficient number of chain links (the difference between the smallest and largest chainwheels added to the difference between the smallest and largest rear cogs). You will also need a longer chain. If the chain is not long enough you risk disaster if you shift to the large chainwheel/large cog combination.
09-08-11, 08:00 PM
#6
Senior Member
Because of the size of the bolt circle on your crankset, you cannot go lower than a 34T ring (well, 33 but those are few and far between). As stated above, your best bet is to swap the cassette bearing in mind that you will now have larger gaps between shifts. Depending on your riding style, you may want to consider either biting the bullet and converting to a triple or selling your current bike and getting something with a triple.
Thread
Thread Starter
Forum
Replies
Last Post
mystang52
Road Cycling
19
08-20-12 05:04 AM
david58
Bicycle Mechanics
10
01-10-12 06:57 PM
