Stuck recessed brake nut in carbon fork
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stuck recessed brake nut in carbon fork
I'm trying to swap out brakes, but the nut is completely stuck. I've used more force than I'm comfortable with to try to loosen it. Anybody have ideas?
#2
Member
Join Date: Jul 2011
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is the bolt stripped/stripping? If not completely, stick the hex into the bolt to hold it in position. Then twist the brake caliper counter-clockwise, as if you were unscrewing it from the brake caliper side. Not an ideal solution, as it may scratch your fork a tiny bit (if any at all). Naturally, you will have to have your wheel off to do this.
I had a similar situation and this did the trick.
I had a similar situation and this did the trick.
#3
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks. I actually completely removed the brake by unscrewing it. The nut will not budge. Evidently it's stuck inside of the fork, rather than the threads being the problem.