Hack Mechanic Needs Help
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Posts: 2,057
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am planning putting a triple chainring on one of my bikes for the "death ride" using a 110/74 bcd crank and DA triple front derailleur (supposedly able to handle 14T differenece between outer and middle ring) with mtn rear derailleur.
Anybody see any problem with Running 48/34/24 (rather than 48/38/24) and 11-32. I wanted to keep the small ring and middle ring only 10T apart so I wouldn't have to worry about dropped chains on death ride.
Anybody see any problem with Running 48/34/24 (rather than 48/38/24) and 11-32. I wanted to keep the small ring and middle ring only 10T apart so I wouldn't have to worry about dropped chains on death ride.
#2
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
What are you planning to use for shifters?
That's a combination that I've never tried. My guess is that it would work fine with friction shifters but you might have to finesse your shifts a bit if you are planning to use STI.
That's a combination that I've never tried. My guess is that it would work fine with friction shifters but you might have to finesse your shifts a bit if you are planning to use STI.