what is tire size code for my cheapo computer
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Posts: 417
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
what is tire size code for my cheapo computer
I have a cheap computer on my bike, when I chg the battery I loose the 4 digit code for my 700 x 35 tires, next time I get it I'm going to engrave it on the top of the unit....
#2
Senior Member
Join Date: Mar 2009
Posts: 138
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You can just measure it yourself. Rotate the front wheel to have the valve stem at the bottom, mark the ground with a piece of tape, roll the bike forward enough to rotate the tire back to the same position (valve stem at the bottom), mark with a second piece of tape. Measure the distance between the two (in millimeters) and you're done. This method takes care of variance between different tires as well.
#3
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,390
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 513 Post(s)
Liked 444 Times
in
334 Posts
The 4-digit code is the wheel circumference (inflated) in mm. 700Cx35 is 2168mm, according to Cateye. https://www.cateye.com/files/manual_d...e_chart_v2.pdf
#4
Really Old Senior Member
Some different computers use different "calculations".
Often if you look at the chart provided, they don't even agree with themselves vs different tire sizes.
As a "rule of the thumb" try-
(622+(2*35))* PI
That will give the "theoretical" tire circumference.
Often if you look at the chart provided, they don't even agree with themselves vs different tire sizes.
As a "rule of the thumb" try-
(622+(2*35))* PI
That will give the "theoretical" tire circumference.
#5
Senior Member
Join Date: Nov 2011
Location: Springfield, MA
Posts: 1,060
Bikes: 2012 Motobecane Fantom CXX, 2012 Motobecane Fantom CX, 1997 Bianchi Nyala, 200? Burley Rock 'n Roll
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Since there can be substantial differences between the actual sizes of tires that are nominally the same, I would never just use the code that's in the instructions. Measuring as described in the first response takes just a few minutes. If your measuring tape is in inches, multiply by 2.54 to get centimeters or 25.4 to get millimeters. If you want to be really accurate, first inflate the tire to the normal pressure you use and remember to put some downward pressure on the handlebars as you move the bike through one rotation.
#6
Senior Member
Thread Starter
Join Date: Jul 2010
Posts: 417
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If I do it in mm's it comes out to 2197. But that doesn't sound like what it was ???
#7
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,001
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4334 Post(s)
Liked 2,977 Times
in
1,614 Posts
I have one computer that only allows 0.5cm increments, so you'd set it at 216.5 or 217.0 but it should be obvious if that's what you have.
#8
Banned
Still got the information flyer that came with the computer?
no? ... you may find another copy online thru the manufacturer's website.
no? ... you may find another copy online thru the manufacturer's website.
Thread
Thread Starter
Forum
Replies
Last Post
Frogbutt
Electronics, Lighting, & Gadgets
4
04-06-13 08:07 PM