JIS headset question
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Land of Cheese
Posts: 1,079
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 213 Times
in
105 Posts
JIS headset question
I'm overhauling a 1973 Schwinn World Voyageur.
The headset cups read 30.0 on a digital caliper; the fork crown race is 26.4.
Most headsets I've looked at ship with 27.0 races combined with 30.0 cups.
Can I substitute a 26.4 crown race from within the same manufacturer family?
Say, this:
https://www.benscycle.net/index.php?m...oducts_id=8193
with this?
https://www.niagaracycle.com/product_...7e16bd6378121f
The headset cups read 30.0 on a digital caliper; the fork crown race is 26.4.
Most headsets I've looked at ship with 27.0 races combined with 30.0 cups.
Can I substitute a 26.4 crown race from within the same manufacturer family?
Say, this:
https://www.benscycle.net/index.php?m...oducts_id=8193
with this?
https://www.niagaracycle.com/product_...7e16bd6378121f
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
Maybe. Are the ball sizes the same for each race? How is the dimensioning of the race at it's base/seal fitting? There's a lot of class B fits out there but without actually trial fitting i wouldn't want to make any promises. Andy.
Thread
Thread Starter
Forum
Replies
Last Post
etherhuffer
Bicycle Mechanics
5
10-27-10 01:20 PM