Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Feeling quite proud: Changed my first tube!

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Feeling quite proud: Changed my first tube!

Old 08-25-12, 09:40 AM
  #1  
Central NJ
Thread Starter
 
ejapplegate's Avatar
 
Join Date: Mar 2012
Location: New Jersey
Posts: 62

Bikes: Cannondale CAAD5 R3000si, Mongoose Crossway 450, Azuki Imperial

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Feeling quite proud: Changed my first tube!

Yes, I know. It is really not much of an accomplishment. But for me it was quite a triumph.

I set out for a nice 40 mile ride this morning. As I was assembling everything, I could not find my tire levers (having swapped handlebar bag for seat bag the previous weekend ride). "No problem" I thought. What are the odds. Today, they were 100%.

I was cruising along, coming up on a radar speed sign. As I tried to go faster, I heard a strange noise coming from the rear tire. And then a very loud POP. I managed to come to a full and complete stop, even remembering to un-clip. A woman walking her dog was very alarmed. I told her (in my best "all under control" voice) it was just a flat.

After cursing my stupidity for not finding the tire levers before setting out, I decided to make the best of it and, rather than calling home for an embarrassing pickup, I would make the best of a bad situation, and use it as a learning experience.

I managed to get the wheel off (something I had practiced before) and inspected the tire and tube. The tire seemed fine, no sharp objects or anything like that. But the tube had a large (4"-6") rip, apparently along a seam. Good thing I had the foresight to be packing a spare tube. There was no way to patch something like this.

I put the tube on and gave it a tiny shot of air from the CO2 pump (another bit of foresight), and then tried to put the tire on. I could almost get it all the way on, but without the tire levers, it was just not going to happen. Of course, earlier in the my ride, I had encountered several other cyclists, who I am sure might have had a tire lever. However, at this point, I was all alone.

I didn't think my driver's license or i-phone would work as an alternate lever. So in desperation, I used one of the allen wrenches I carried in my meager tool kit. Being very careful not to damage the tube, I managed to get the tire all the way on. Success!

I finished pumping up the tire, reattached the wheel (and the rear brake), and I was on my way.

I ended up not following my originally planned ride, but had a good time nonetheless.

The moral of the story for me was two-fold:

- Always bring all the tools you might need
- Don't let some simple road-side repairs get in the way of a good day's ride.
ejapplegate is offline  
Old 08-25-12, 09:43 AM
  #2  
Senior Member
 
Join Date: Dec 2005
Posts: 7,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
good
ultraman6970 is offline  
Old 08-25-12, 09:50 AM
  #3  
Senior Member
 
Join Date: May 2012
Location: SW Florida
Posts: 367

Bikes: All Treks - fitness and road

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I think you performed extraordinarily well. You say tire repair is no big deal, but the first time at roadside is a challenge. And your baptism under fire was a rear tire! Now, you're a veteran and you learned a key lesson about being prepared. Nice work.
SwampDude is offline  
Old 08-25-12, 10:07 AM
  #4  
Senior Member
 
GrandaddyBiker's Avatar
 
Join Date: May 2012
Location: South Carolina
Posts: 269
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Years of riding and I never had a flat while out on a ride. Then about two months ago I had the same thing happen to me that happen to you. I heard a bang and the tube had blown. I had everything I needed to fix a flat from a puncture. However, just like you my tube had split along a seam. No patching that and I had no tube with me. I had two, still in the box, new tubes at home but that was doing me no good out here on the road. So I walked my bike back home.

I now carry a tube in addition to my patch kit in my repair bag.

Last edited by GrandaddyBiker; 08-25-12 at 01:27 PM. Reason: chnged spelling on a word
GrandaddyBiker is offline  
Old 08-25-12, 10:45 AM
  #5  
bike whisperer
 
Kimmo's Avatar
 
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533

Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times in 508 Posts
Half a wall of text for a flat fix? Wait till we hear about your first wheel build

I kid. I might post a thread if I rode 40 miles...

I hate it when tyres require a lever; I consider having to use one defeat. Aside from developing a whole bunch of techniques to maximise leverage over the bead, I've noticed a lot of tyres have excess rubber hanging off inside the bead - trim it off and the tyre will go on a lot easier. Careful to leave the rubber on the side of the bead intact though, otherwise it may not seat properly. Take care also not to damage the fabric plies of the casing around the bead. It's a lot easier to do with old tyres that have perished a bit, which is by the way, no reason to stop using them.



Originally Posted by GrandaddyBiker
I needed to fix a flat from a puncher.
Someone punched your tyre flat?

Holy crap!

Last edited by Kimmo; 08-25-12 at 10:49 AM.
Kimmo is offline  
Old 08-25-12, 11:22 AM
  #6  
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
The real test is how proud you feel tomorrow.

If all your tire takes is a little topping up, that's normal for a tire inflated with CO2. You did a good job.

If it's flat again, I wouldn't call it normal, but it's certainly common. You probably pinched the tube under one of the tire beads so you'll get a chance to practice some more.

Uh - next time try using your quick release skewer for an emergency tire lever. You'll always have it with you and it's less apt to damage your new tube than a screwdriver or allen wrench.
Retro Grouch is offline  
Old 08-25-12, 12:09 PM
  #7  
Central NJ
Thread Starter
 
ejapplegate's Avatar
 
Join Date: Mar 2012
Location: New Jersey
Posts: 62

Bikes: Cannondale CAAD5 R3000si, Mongoose Crossway 450, Azuki Imperial

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thank you. I would have never thought to use the quick release skewer!

I will definitely be checking the tire tomorrow.
ejapplegate is offline  
Old 08-25-12, 01:29 PM
  #8  
Senior Member
 
GrandaddyBiker's Avatar
 
Join Date: May 2012
Location: South Carolina
Posts: 269
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Kimmo

Someone punched your tyre flat?

Holy crap!
Ok I fixed it. Sometimes even the spell check will let the wrong word slip through.
GrandaddyBiker is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SlinkyWizard
General Cycling Discussion
39
04-24-16 02:11 AM
Bikey Mikey
Fifty Plus (50+)
10
02-19-12 07:05 AM
Champlaincycler
Bicycle Mechanics
9
10-02-11 02:40 PM
KBentley57
Clydesdales/Athenas (200+ lb / 91+ kg)
5
06-20-11 02:12 PM
pickpocket293
Road Cycling
49
08-20-10 12:53 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.