Replacement brake & shifter cables: which to buy?
#1
Warehouse Monkey
Thread Starter
Join Date: Jul 2008
Location: Lebanon Co., Pennsylvania
Posts: 1,604
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 305 Post(s)
Likes: 0
Liked 7 Times
in
2 Posts
Replacement brake & shifter cables: which to buy?
My Windsor Tourist has nearly 2000 miles on it. The cables all around are starting to fray and stretch. Time for an over haul. Since most of my LBS's have lousy customer service I was gonna order online. But I found that there can be various sizes when it comes to road bike shifter cables. How do I know what size to get?
I see one shop has a Shimano 10-speed replacement kit. Since I have Shimano 8-speed, would this work just as well? I take it that brake cables seem to be universal as long as I stick with road bike cables, correct?
Thanks in advance.
I see one shop has a Shimano 10-speed replacement kit. Since I have Shimano 8-speed, would this work just as well? I take it that brake cables seem to be universal as long as I stick with road bike cables, correct?
Thanks in advance.
__________________
'10 Specialized Hardrock
'10 Specialized Hardrock
#2
Senior Member
Join Date: Mar 2003
Location: Beaufort, South Carolina, USA and surrounding islands.
Posts: 8,521
Bikes: Cannondale R500, Motobecane Messenger
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Get the universal gear cable sets with housing. They are a good value for a home mechanic. These are easily available from most online retailers. I recommend a good set of cable cutters and diagonal cutters. Some mechanics like using a rotary cutter to get a nice finish to the housing end.
#3
I let the dogs out
Join Date: Apr 2011
Location: Boulder, CO
Posts: 1,934
Bikes: 2011 Fuji Roubaix 1.0, 2003 Ti Merlin Solis, & 1994 Raleigh MT200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Get the universal gear cable sets with housing. They are a good value for a home mechanic. These are easily available from most online retailers. I recommend a good set of cable cutters and diagonal cutters. Some mechanics like using a rotary cutter to get a nice finish to the housing end.
#5
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,670
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 836 Post(s)
Liked 1,061 Times
in
745 Posts
"Jagwire Racer" set is all you need. Works with all 7-10 speed indexed shifters and the brake cable housing is made a little different to give a more positive and firm feel. Functions at least as well and lasts longer than the Shimano Dura-Ace set, cheaper and comes with ferrules, rubber o-rings and rubber frame protectors. Shop around and you can get a complete set for around $35. https://www.treefortbikes.com/product...lete-Road.html and https://www.ebikestop.com/cable_and_h..._sets))404.php
Last edited by Crankycrank; 09-11-12 at 08:01 PM.
#6
Still learning
Why not try the $5.00-$7.00 Bell kit from Walmart or Ace Hardware? Then if you don't like it, you can upgrade. It only takes 30-45 minutes to do a nice neat job on cable changing. It's better than 1/2 the cables I remove from low end bikes.
#7
Senior Member
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131
Bikes: Priority 600, Priority Continuum, Devinci Dexter
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times
in
37 Posts
Noooo......
Don't buy those low-end Bell kits. Waste of money. The ones I have seen use unlined cable, and use the same, non-SIS cable for both brake and shifting. For an eight-speed bike, the OP really needs derailleur cable, not brake cable.
Don't buy those low-end Bell kits. Waste of money. The ones I have seen use unlined cable, and use the same, non-SIS cable for both brake and shifting. For an eight-speed bike, the OP really needs derailleur cable, not brake cable.
#8
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,445
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4233 Post(s)
Liked 2,948 Times
in
1,807 Posts
I tend to buy this stuff. Not the cheapest, but it's got all the bits and bobs I need and it works pretty well. It is easier to go a lot cheaper and still get decent stuff though.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#9
Senior Member
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,545
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1528 Post(s)
Liked 718 Times
in
510 Posts
The good news is that with 8spd you don't need hardcore shift housing; any old compressionless stuff should work.
The skinny stuff that worked fine for 8spd was no good when I went to 9spd, though - had to swap it out for the beefy Jagwire housing.
The shorter cable pull per shift of 9 & 10spd is like a quieter signal in the noise of housing compression and cable friction. It's a stupid signal-to-noise ratio.
The skinny stuff that worked fine for 8spd was no good when I went to 9spd, though - had to swap it out for the beefy Jagwire housing.
The shorter cable pull per shift of 9 & 10spd is like a quieter signal in the noise of housing compression and cable friction. It's a stupid signal-to-noise ratio.
Thread
Thread Starter
Forum
Replies
Last Post
Lovegasoline
Bicycle Mechanics
18
06-26-16 10:07 AM
gerv
Bicycle Mechanics
13
11-30-14 05:41 PM