What brand for V-brakes?
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Posts: 1,411
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Likes: 0
Liked 32 Times
in
18 Posts
What brand for V-brakes?
I've finally reached the point where I'm ready to replace the 17 year-old cantilever brakes on my bike. I definately want V-brakes but I don't know how much difference brand and level makes. I've been looking at Deore calipers and levers but haven't looked higher than that or at other brands like SRAM or Tektro.
Any recommendations on a specific set? My primary motivator is easier adjustability but I also prefer the greater stopping power and smooth feel of V-brakes. I'm a large clydesdale (350 lbs) and my riding will be all in dry conditions, pavement and hard packed earth.
Any recommendations on a specific set? My primary motivator is easier adjustability but I also prefer the greater stopping power and smooth feel of V-brakes. I'm a large clydesdale (350 lbs) and my riding will be all in dry conditions, pavement and hard packed earth.
#2
Banned
Paul is the only one that does not use the frame boss as the inside of the pivot axis.
They Make a stainless steel sleeve to go over the frame boss
and then put O rings in to keep the grease clean.
Return coil springs are counterbalanced with a wrench on the flats,
and an allen wrench holding the adjustment ... [and the brake on]
made in California..
My favorite rim brake is Hydraulic.
Magura HS33 fits on V bosses but as an anchor point, not a Pivot.
smooth progressive braking with plenty of power is a Given..
Made in Germany,
They Make a stainless steel sleeve to go over the frame boss
and then put O rings in to keep the grease clean.
Return coil springs are counterbalanced with a wrench on the flats,
and an allen wrench holding the adjustment ... [and the brake on]
made in California..
My favorite rim brake is Hydraulic.
Magura HS33 fits on V bosses but as an anchor point, not a Pivot.
smooth progressive braking with plenty of power is a Given..
Made in Germany,
Last edited by fietsbob; 09-13-12 at 01:07 PM.
#3
Senior Member
Join Date: Apr 2006
Posts: 3,653
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Likes: 0
Liked 106 Times
in
80 Posts
Tektros are good bang for the buck and they make lots of different levels for different needs. They might even make the ones labeled SRAM as they make brakes for a lot of others also. I have Tektros on a bunch of bikes and am very happy with them. Roger
#4
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
Avid is a frequently recommended make. (They are a division of SRAM) I was looking at the Avid-Single Digit 7 for a while, but ended up using some generic V-brakes I got from a $20 parts bike from Craigslist.
#5
Senior Member
Join Date: Oct 2007
Location: West Yorkshire, United Kingdom
Posts: 5,773
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 453 Post(s)
Liked 104 Times
in
87 Posts
Avid or Shimano (Deore is good) is good for low budget, Tektro for even cheaper, but have never been impressed by their pads.
Pauls are nice, as are all the parts made by them, but they do cost.
Whatever you look at, as you noted, you need new levers, as canti levers won't work with V's.
Magura's are a good choice, but much more expensive then Shimano or Avids
Pauls are nice, as are all the parts made by them, but they do cost.
Whatever you look at, as you noted, you need new levers, as canti levers won't work with V's.
Magura's are a good choice, but much more expensive then Shimano or Avids
#6
Senior Member
Join Date: Jan 2012
Location: Trenton On
Posts: 245
Bikes: 2010 Cannondale T1, 1998 Specialized FSR
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Almost anything will be better than canti brakes. I'm using Deore V brakes married to Tektro RL520 brake levers on my Cannondale T1. I'm using Avid Single Digit 5's with Tektro MTB levers on my Kona Lava Dome. Both brake sets work well with a slight advantage going to the Avids. They work slightly better. They were a bit cheaper and came with both a 90 and something like a 120 degree noodle for both brakes. Al
#7
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 163 Times
in
89 Posts
Strictly speaking, there is only ONE brand of V-brake, and that's Shimano. "V-brake" is a registered trademark of Shimano. What you're asking, really, is for recommendations for the best brand(s) of linear pull brake.
#8
certified vegetarian
Join Date: Aug 2008
Location: Houston, Texas
Posts: 364
Bikes: 1973 Schwinn Paramount P10-9, 1988 Cannondale SR2000, 1994 Bridgestone XO-4, 1998 Bianchi Sam Remo, 1998 Ibis Spanky, 2009 Soma Rush, 2012 Surly Crosscheck
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
#9
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Avid is a frequently recommended make. (They are a division of SRAM) I was looking at the Avid-Single Digit 7 for a while, but ended up using some generic V-brakes I got from a $20 parts bike from Craigslist.
#10
Senior Member
Join Date: Jul 2002
Posts: 6,956
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
In Shimano's lineup, the new Deore 590s are probably the best value. They come with the brake shoes that take replaceable inserts: https://www.aebike.com/Shimano-Deore-...k_p_32729.html The brake shoe set alone would set you back about $15-$18.
Practical tip if/when you install these: loosen up the brake pads on the arms, then put a drop of oil inside the 5mm hex nut that fastens the brake pad, and a drop where the nut contacts the washer. If you assemble them dry, the pad wants to turn with the nut due to the dry metal-on-metal friction.
#11
Senior Member
Join Date: Aug 2012
Location: Colorado Springs
Posts: 1,134
Bikes: Borealis Echo, Ground Up Designs Ti Cross bike, Xtracycle, GT mod trials bike, pixie race machine
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Both Shimano and Avid make very comparable quality brakes at a pretty low cost.
At 350lbs you want as much stopping power as you can get, the Magura hydro rim brakes are the strongest rim brakes you can get. If you can spend the money you will not regret it, they are nicknames "rim crushers" for a reason.
At 350lbs you want as much stopping power as you can get, the Magura hydro rim brakes are the strongest rim brakes you can get. If you can spend the money you will not regret it, they are nicknames "rim crushers" for a reason.
#12
Senior Member
Avid SD-7s or Shimano XTs are the two I'd recommend. I have both on a couple bikes. I'd also say Avid Ultimates if you've got the cash. They're hella nice brakes. Either way, get a good set of compression-less housing. Avid make one with a red sheath which covers the cable between cable stops creating an semi-full housing run from lever to caliper. And replace the stock pads with some Kool Stop salmon colored pads.
#13
Mostly harmless ™
Join Date: Nov 2010
Location: Novi Sad
Posts: 4,430
Bikes: Heavy, with friction shifters
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1107 Post(s)
Liked 216 Times
in
130 Posts
These work well enough in all conditions (winter, summer, hills, whatever). Just put some decent pads. Shimano Acera:
https://www.chainreactioncycles.com/M...?ModelID=34700
These are a bit better. Shimano Deore.
https://www.chainreactioncycles.com/M...?ModelID=39004
Deore are some 50% more expensive, but that's like 10 euros extra for better and more durable brakes. I bought Acera and have been happy for over 2 years and over 8000 kilometres.
https://www.chainreactioncycles.com/M...?ModelID=34700
These are a bit better. Shimano Deore.
https://www.chainreactioncycles.com/M...?ModelID=39004
Deore are some 50% more expensive, but that's like 10 euros extra for better and more durable brakes. I bought Acera and have been happy for over 2 years and over 8000 kilometres.
#14
Senior Member
Join Date: Jun 2011
Posts: 104
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Don't forget to get good brake pads, they might have a greater impact than the difference between several decent brake models. E.g. Kool Stop salmon coloured ones get good reviews.
Thread
Thread Starter
Forum
Replies
Last Post
double0eskimo
Singlespeed & Fixed Gear
13
10-10-12 09:58 PM
double0eskimo
Road Cycling
5
10-09-12 08:28 PM
arexjay
Cyclocross and Gravelbiking (Recreational)
3
05-25-10 04:54 PM