Tool kit for DIY'er
09-28-12, 08:10 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2012
Location: Twin Cities, MN
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Tool kit for DIY'er
I am looking for a good starter tool kit and would like to know what you guys would recommend. I pretty much just need tools to work on my single speed and only that for the most part. I just started cycling about 4mos ago and I like to do everything myself if I can or have the tools to do it. So far I have bought a Parktool bb spanner wrench, Parktool crank arm puller, a couple of Parktool double ended cone wrenches and a Parktool bmx style freewheel removal tool. I do know that when it comes to tools, you get what you pay for because I am a engine machinist and own my own cylinder rebuilding equipments and know how it is to spend twice as much just to get the job done right when I could've done it right the first time with the proper tool. Basicly I'm just looking to add or buy a kit for working on my single speed. Thanks in advance!
09-28-12, 08:34 PM
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,704
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5777 Post(s)
Liked 2,575 Times
in
1,426 Posts
You have the basics covered, except for a pedal wrench. At some point you'll want a spoke wrench, and if you ever go fixed, a lock ring tool, and chain whip (you can make your own).
If/when you replace your headset that will involve a number of tools, but the specifics depend on the headset.
Don't go out buying tools until the job comes up. Parts change every year or two, so a tool that makes sense today could be obsolete before you ever use it.
If/when you replace your headset that will involve a number of tools, but the specifics depend on the headset.
Don't go out buying tools until the job comes up. Parts change every year or two, so a tool that makes sense today could be obsolete before you ever use it.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
09-28-12, 08:37 PM
#3
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I'd suggest that you continue on the path that you are on; buy good quality tools as you need them. Kits will tend to have a lot of either duplicate or unneeded tools. A set of ball-end metric hex L-wrenches, a metric socket set and some screwdrivers are generally useful; you likely already have these from your engine work. A good set of cable cutters is a wise investment.
09-28-12, 08:40 PM
#4
Senior Member
Thread Starter
Join Date: Aug 2012
Location: Twin Cities, MN
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You have the basics covered, except for a pedal wrench. At some point you'll want a spoke wrench, and if you ever go fixed, a lock ring tool, and chain whip (you can make your own).
If/when you replace your headset that will involve a number of tools, but the specifics depend on the headset.
Don't go out buying tools until the job comes up. Parts change every year or two, so a tool that makes sense today could be obsolete before you ever use it.
If/when you replace your headset that will involve a number of tools, but the specifics depend on the headset.
Don't go out buying tools until the job comes up. Parts change every year or two, so a tool that makes sense today could be obsolete before you ever use it.
09-28-12, 08:42 PM
#5
Senior Member
Thread Starter
Join Date: Aug 2012
Location: Twin Cities, MN
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'd suggest that you continue on the path that you are on; buy good quality tools as you need them. Kits will tend to have a lot of either duplicate or unneeded tools. A set of ball-end metric hex L-wrenches, a metric socket set and some screwdrivers are generally useful; you likely already have these from your engine work. A good set of cable cutters is a wise investment.
09-29-12, 12:39 AM
#6
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
Crown race is usually slid onto the fork steerer tube and tapped down to snug the crown, just a friction fit, it comes off with some gentle tapping. Headtube races are also tapped in.
A work stand is very useful, though it has to be a good one. A cheap stand is frustrating and will eventually drop your bike or dent a tube. Alternative to a work stand is to hang ropes or straps from the ceiling and suspend the bike.
Don't forget the tool kit you carry on the bike. Lots of threads on those. Some of those tools can do double duty at home, light duty anyway, like chain tool, spoke wrench, etc.
A work stand is very useful, though it has to be a good one. A cheap stand is frustrating and will eventually drop your bike or dent a tube. Alternative to a work stand is to hang ropes or straps from the ceiling and suspend the bike.
Don't forget the tool kit you carry on the bike. Lots of threads on those. Some of those tools can do double duty at home, light duty anyway, like chain tool, spoke wrench, etc.
09-29-12, 05:31 AM
#7
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,464 Times
in
1,433 Posts
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
polymorphself
Classic & Vintage
33
11-07-17 11:56 AM
