Chirping noise coming from my front brake caliper/rotor on specialized mountain bike
#1
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Mukilteo, WA
Posts: 63
Bikes: 2012 Tarmac, 2016 Emonda sl5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Chirping noise (Brake caliper/rotor content)
Hello all, I purchased a new specialized hardrock last year and have developed an annoying chirping noise. It happens when I'm pedaling and coasting. I pulled off the front wheel and discovered a few spots where the rotor was rubbing on the caliper. I pulled off the rotor and set it on a flat surface and it seems to not be bent or warped in any way. Is there a way to adjust the caliper at all? or any other thing i could do to get this noise to stop? I have attached pics to show where it's rubbing;
Last edited by gabeham206; 05-16-13 at 08:50 AM. Reason: too long of a title
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,689
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5772 Post(s)
Liked 2,564 Times
in
1,420 Posts
You can't tell if a rotor is straight by laying it on a table. Mount the wheel and spin it with a dry marker held against the fork blade advancing it slowly until it just touches. You'll probably get a short line where the rotor is warped toward the blade.
You can see the extent of the warpage, by holding a pencil braced against the blade and just touching at the high spot, then slowly turning the wheel to find the section farthest way.
I don't have enough familiarity with disc brakes to tell you the allowable runnout, but if it's slight, you might be able to recenter the brake so it clears both sides all the way around. If the runout is more than 2mm or so, odds are you'll need to see a dealer for help straightening it. This is something you can do yourself if you have decent hand skills.
You can see the extent of the warpage, by holding a pencil braced against the blade and just touching at the high spot, then slowly turning the wheel to find the section farthest way.
I don't have enough familiarity with disc brakes to tell you the allowable runnout, but if it's slight, you might be able to recenter the brake so it clears both sides all the way around. If the runout is more than 2mm or so, odds are you'll need to see a dealer for help straightening it. This is something you can do yourself if you have decent hand skills.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.