Press fit BB shell for the Sram XX1
#1
Newbie
Thread Starter
Join Date: May 2013
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Press fit BB shell for the Sram XX1
I know this was up for discussion before but cannot find any info. on it. so here it is again.
I am building a 29er and plan on using the XX1 system and a press in BB I was thinking of using BB30 or GXP.
1.What one is the best to use?
2. BB shell dimensions do I need machine to? Alum. frame. That I am building.[SUB][/SUB]
Any help here would be great.
Thanks, Ted
I am building a 29er and plan on using the XX1 system and a press in BB I was thinking of using BB30 or GXP.
1.What one is the best to use?
2. BB shell dimensions do I need machine to? Alum. frame. That I am building.[SUB][/SUB]
Any help here would be great.
Thanks, Ted
#2
ot.net slave
Join Date: Feb 2006
Location: Canberra, Australia
Posts: 571
Bikes: Salsa mtb * 3, Intense mtb * 1, Abeni SS rd * 1, Salsa road/touring * 2, Trek Damn one * 1, Vintage/projects * many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The GXP system is a SRAM crank system, you might mean PF30 (The SRAM version of BB30). PF30 will be easier for you to make as the tolerances aren't as fine, and you won't need to machine a recess into the shell for a circlip.
- Joel
- Joel