Brake Replacement for Old MTB
#1
Newbie
Thread Starter
Join Date: Feb 2014
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Brake Replacement for Old MTB
So I recently bought a pair of mini v brakes for the front. While trying to install them I realized that the bosses have the spring holes towards the outside rather than the inside. The bosses are also built into the fork so I can't replace them. Is there a way to mount on the mini-v's? If not, are there any brakes out there that do not use the spring holes or need them on the outside?
PS: The bike is an old Univega Alpina Pro that uses shimano xt cantilevers. Not sure of the brake model but it should be a BR-M730. I don't have any pics but this is the exact bike/frame
https://store.bicycleczar.com/product-p/12120072.htm
PS: The bike is an old Univega Alpina Pro that uses shimano xt cantilevers. Not sure of the brake model but it should be a BR-M730. I don't have any pics but this is the exact bike/frame
https://store.bicycleczar.com/product-p/12120072.htm
Last edited by S2Ace; 04-03-14 at 12:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
sailorbenjamin
Classic & Vintage
12
09-11-12 07:01 AM
robtown
Bicycle Mechanics
10
04-02-11 03:36 AM