Super strong cassette body?
#1
Senior Member
Thread Starter
Super strong cassette body?
My son is living in Seattle and has blown out two cassette bodies this summer. Seems the pawls cannot handle the load he puts on them. Is there anyone out there that knows of a 10 speed hub that can handle some serious pounding up hills?
Chris King looks good, but seems complicated.
DT Swiss looks good, too. Super simple idea and real easy to service, but can they handle high torque loads?
Chris King looks good, but seems complicated.
DT Swiss looks good, too. Super simple idea and real easy to service, but can they handle high torque loads?
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
What makes and models has he damaged? Shimano, SRAM and Campy freehub bodies appear to stand up to Pro road and MTB riders with little problems so I wonder what brand(s) your son is breaking.
#4
Senior Member
Join Date: Aug 2012
Location: Colorado Springs
Posts: 1,134
Bikes: Borealis Echo, Ground Up Designs Ti Cross bike, Xtracycle, GT mod trials bike, pixie race machine
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
My favorite hubs are from White Industries but there are a lot of great brands out there like DT, Hope, Hadley, King, Phil Wood. Any of those should be able to handle anything your son can throw at them.
#6
Mechanic/Tourist
#7
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
To amplify what others posted: Get a wheel with a (low-end) true Shimano hub. If he breaks that, then your son's usage is the problem -- acknowledging that he won't likely change, start looking for a tandem specific hub.
#8
Banned
IDK if their freehub driver uses any More pawls..
Bending? solid steel Nut fixed, not a QR type may be something cheap to try.
I think Shimano's tandem hubs are still using the 10x1 axle, just longer .. 145
Bending? solid steel Nut fixed, not a QR type may be something cheap to try.
I think Shimano's tandem hubs are still using the 10x1 axle, just longer .. 145
Last edited by fietsbob; 07-05-14 at 11:35 AM.
#9
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
How does the kids riding style damage a freehub ? Coast, then slam on the pedals, repeatedly ?? Many of us put out a lot of watts with never a problem.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Last edited by Homebrew01; 07-05-14 at 12:08 PM.
#11
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
Unfortunately this is typical of the non-conversations on this forum. The OP throws out a poorly defined problem and does not follow with clarification, responses, etc. Then the rest of us (foolishly) offer all kinds of imagined "solutions" spinning into ever widening circles of improbability.
We don't know about the make or quality of the hubs, whether or not they actually failed, the mechanisms of failure, the circumstances of failure, the rider's characteristics and techniques, and so much more.
Last edited by AnkleWork; 07-05-14 at 12:42 PM.
#12
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Unfortunately this is typical of the non-conversations on this forum. The OP throws out a poorly defined problem and does not follow with clarification, responses, etc. Then the rest of us (foolishly) offer all kinds of imagined "solutions" spinning into ever widening circles of improbability.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#13
Senior Member
Homebrew01; Ditto! It would also be great if responders would first read the original post... If they had they would find that the question was about breakage of cassette freehubs not wheel hubs in general. But like others, I have to wonder just what the youngster is doing to break them.... With a zillion bike shops in Seattle, the recommendation to visit one seems sound.
/K
/K
#14
Senior Member
Thread Starter
To clarify the my original post where I said the pawls seem unable to handle the load, what is happening is the pawls and pawl springs are coming apart from each other. I believe the pawl pivots may be loosening and backing themselves out, or are experiencing fatigue and breaking because the first body that failed one pawl was floating inside the body. That was last summer.
The one still in place was chipped due to the spring failing. I do believe he "jumps" on the rear wheel quite hard when jamming a hill. Normally he climbs in a 50 x 21 gear. Not too horribly big, but the hills are very steep.
Keep in mind I am several states away from him and going on the information he provides in pictures and words. He has visited several shops in the area, but relies on me to get the parts and assemble them.
The wheel is a Velocity road wheel with a Deep V rim, 32 3 cross lacing, and Velocity road hub. I believe the hub is supplied by the same company that supplies Formula hubs, which is likely the issue.
Shimano cassette bodies are not the greatest as I have seen many fail the same way under race conditions.
I have done quite a bit of research and have decided to go DT Swiss. Got my hands on one, took it apart and was mystified why this design has not been copied yet. Super simple, easy and effective. Talked with the fella that owned the hub and he says it has been on 3 mountain bikes so far and no issues. The hub was 4 years old.
As a side note, the current wheel fully tensioned (according to Park tension meter) and day one he was flexing the wheel or frame enough to rub the tire on the brake pads. Had to lower the pads to prevent rub through. Caad10 frame. The kid is an ox. I raced with some seriously big guys that never had wheel rub like this. Cassette body failures, but not wheel rub.
The one still in place was chipped due to the spring failing. I do believe he "jumps" on the rear wheel quite hard when jamming a hill. Normally he climbs in a 50 x 21 gear. Not too horribly big, but the hills are very steep.
Keep in mind I am several states away from him and going on the information he provides in pictures and words. He has visited several shops in the area, but relies on me to get the parts and assemble them.
The wheel is a Velocity road wheel with a Deep V rim, 32 3 cross lacing, and Velocity road hub. I believe the hub is supplied by the same company that supplies Formula hubs, which is likely the issue.
Shimano cassette bodies are not the greatest as I have seen many fail the same way under race conditions.
I have done quite a bit of research and have decided to go DT Swiss. Got my hands on one, took it apart and was mystified why this design has not been copied yet. Super simple, easy and effective. Talked with the fella that owned the hub and he says it has been on 3 mountain bikes so far and no issues. The hub was 4 years old.
As a side note, the current wheel fully tensioned (according to Park tension meter) and day one he was flexing the wheel or frame enough to rub the tire on the brake pads. Had to lower the pads to prevent rub through. Caad10 frame. The kid is an ox. I raced with some seriously big guys that never had wheel rub like this. Cassette body failures, but not wheel rub.
#15
Senior Member
Join Date: Jun 2013
Location: E TN MTS
Posts: 258
Bikes: 1989 TREK 400, Suntour accushift drivetrain. 80's Raleigh mtb all Suntour.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
To clarify the my original post where I said the pawls seem unable to handle the load, what is happening is the pawls and pawl springs are coming apart from each other. I believe the pawl pivots may be loosening and backing themselves out, or are experiencing fatigue and breaking because the first body that failed one pawl was floating inside the body. That was last summer.
The one still in place was chipped due to the spring failing. I do believe he "jumps" on the rear wheel quite hard when jamming a hill. Normally he climbs in a 50 x 21 gear. Not too horribly big, but the hills are very steep.
Keep in mind I am several states away from him and going on the information he provides in pictures and words. He has visited several shops in the area, but relies on me to get the parts and assemble them.
The wheel is a Velocity road wheel with a Deep V rim, 32 3 cross lacing, and Velocity road hub. I believe the hub is supplied by the same company that supplies Formula hubs, which is likely the issue.
Shimano cassette bodies are not the greatest as I have seen many fail the same way under race conditions.
I have done quite a bit of research and have decided to go DT Swiss. Got my hands on one, took it apart and was mystified why this design has not been copied yet. Super simple, easy and effective. Talked with the fella that owned the hub and he says it has been on 3 mountain bikes so far and no issues. The hub was 4 years old.
As a side note, the current wheel fully tensioned (according to Park tension meter) and day one he was flexing the wheel or frame enough to rub the tire on the brake pads. Had to lower the pads to prevent rub through. Caad10 frame. The kid is an ox. I raced with some seriously big guys that never had wheel rub like this. Cassette body failures, but not wheel rub.
The one still in place was chipped due to the spring failing. I do believe he "jumps" on the rear wheel quite hard when jamming a hill. Normally he climbs in a 50 x 21 gear. Not too horribly big, but the hills are very steep.
Keep in mind I am several states away from him and going on the information he provides in pictures and words. He has visited several shops in the area, but relies on me to get the parts and assemble them.
The wheel is a Velocity road wheel with a Deep V rim, 32 3 cross lacing, and Velocity road hub. I believe the hub is supplied by the same company that supplies Formula hubs, which is likely the issue.
Shimano cassette bodies are not the greatest as I have seen many fail the same way under race conditions.
I have done quite a bit of research and have decided to go DT Swiss. Got my hands on one, took it apart and was mystified why this design has not been copied yet. Super simple, easy and effective. Talked with the fella that owned the hub and he says it has been on 3 mountain bikes so far and no issues. The hub was 4 years old.
As a side note, the current wheel fully tensioned (according to Park tension meter) and day one he was flexing the wheel or frame enough to rub the tire on the brake pads. Had to lower the pads to prevent rub through. Caad10 frame. The kid is an ox. I raced with some seriously big guys that never had wheel rub like this. Cassette body failures, but not wheel rub.
#16
Mechanic/Tourist
The gear one climbs in means nothing without knowing the grade and speed. 50/21 on a 3% grade is not a strain, but the same gear on an 8% grade at 8 mph is very hard on the bike. Normally climbing in a high gear (out of the saddle only) is done to maintain speed over a relatively short hill or to change up the muscles used for a short time, and is generally done still using a respectable rpm rate. The rocking that the bike experiences during out of the saddle riding absorbs most of the shock at normal climbing speed and cadence.
Last edited by cny-bikeman; 07-11-14 at 05:13 AM.
#17
Senior Member
Thread Starter
Yes, 50/21 on a 8% grade is big, too big for me at least. He does not race, just likes to ride hard for stress relief. Nice thing is he will wait for you to catch up. Usually on the down hill! Yeah, he is one of those that likes to demonstrate his superiority on the climb.
DT Swiss also has a 36t star ratchet, and steel cassette body options. I know what he will be riding.
To forum members: Please, when communicating in the virtual world remember your manners and practice good interpersonal skills. Being blunt or argumentative is never going to win medals. I deal with this kind of thing all day long and it bothers me that people forget the other readers are human, too.
Ask yourself, is this how I talk to my children? My mother? One of the nuns at the church? If not, then don't print it.
Avoid the snarky responses and comments, it will brighten your day!
DT Swiss also has a 36t star ratchet, and steel cassette body options. I know what he will be riding.
To forum members: Please, when communicating in the virtual world remember your manners and practice good interpersonal skills. Being blunt or argumentative is never going to win medals. I deal with this kind of thing all day long and it bothers me that people forget the other readers are human, too.
Ask yourself, is this how I talk to my children? My mother? One of the nuns at the church? If not, then don't print it.
Avoid the snarky responses and comments, it will brighten your day!
#18
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
Yes, 50/21 on a 8% grade is big, too big for me at least. He does not race, just likes to ride hard for stress relief. Nice thing is he will wait for you to catch up. Usually on the down hill! Yeah, he is one of those that likes to demonstrate his superiority on the climb.
DT Swiss also has a 36t star ratchet, and steel cassette body options. I know what he will be riding.
To forum members: Please, when communicating in the virtual world remember your manners and practice good interpersonal skills. Being blunt or argumentative is never going to win medals. I deal with this kind of thing all day long and it bothers me that people forget the other readers are human, too.
Ask yourself, is this how I talk to my children? My mother? One of the nuns at the church? If not, then don't print it.
Avoid the snarky responses and comments, it will brighten your day!
DT Swiss also has a 36t star ratchet, and steel cassette body options. I know what he will be riding.
To forum members: Please, when communicating in the virtual world remember your manners and practice good interpersonal skills. Being blunt or argumentative is never going to win medals. I deal with this kind of thing all day long and it bothers me that people forget the other readers are human, too.
Ask yourself, is this how I talk to my children? My mother? One of the nuns at the church? If not, then don't print it.
Avoid the snarky responses and comments, it will brighten your day!
BTW, you should definitely try the DT hub.
#19
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,374
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2483 Post(s)
Liked 2,955 Times
in
1,678 Posts
Was going to suggest that the described problem is most often seen with cassettes whose owners applied grease to the internals rather than oil, thus preventing the pawl springs from doing their work, but your son's strength and riding technique probably constitute a sufficient explanation. Still, it's odd that you don't heard of this problem occurring with professional sprinters such as Greipel and Cavendish.
#21
Senior Member
Thread Starter
I don't get it either. I have seen Shimano bodies fail in the same manner, but not repeatedly for the same rider. The DT Swiss hub is on the way. Just going to have to deal with the aluminum body, no steel available for the 350 hub. Bummer.
#22
Mechanic/Tourist
To forum members: Please, when communicating in the virtual world remember your manners and practice good interpersonal skills. Being blunt or argumentative is never going to win medals. I deal with this kind of thing all day long and it bothers me that people forget the other readers are human, too.
#23
Senior Member
Thread Starter
Perhaps I am too sensitive. Please accept my apologies if any of you were offended by my comments.
Can't wait to build the wheel! Until then, he will just have to keep running.
Can't wait to build the wheel! Until then, he will just have to keep running.
#24
Senior Member
The best hubs are shimano ultegras and 105's. The freehub bodies are for the most part bullet proof. If he rides in the rain a lot or gets the hub under water then the problem is maintenance.
I am not impressed with the DT hubs except for the older types with outboard bearings and normal pawls.
I am not impressed with the DT hubs except for the older types with outboard bearings and normal pawls.
#25
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
From what I understand, a gear like 50/21 is a strain on the rider, but not really one on the rear hub and pawls. For that, you need the leverage of a much lower gear. (Shimano has rated some cassette hubs only up to a 34T rear cog, but not a 36T, for example.)
It's probably the "I do believe he "jumps" on the rear wheel quite hard when jamming a hill" that does it -- if the pawl is floating somewhere in between engagement and the "outer" part of the ramp, the edge can chip if banged into engagement. I don't know if this is my nature or an unconscious desire to treat my equipment well, but when going from coast to pedalling, I pedal a little lighter until cranking up the output (which still isn't much.) Perhaps developing slightly better habits would help your son?
It's probably the "I do believe he "jumps" on the rear wheel quite hard when jamming a hill" that does it -- if the pawl is floating somewhere in between engagement and the "outer" part of the ramp, the edge can chip if banged into engagement. I don't know if this is my nature or an unconscious desire to treat my equipment well, but when going from coast to pedalling, I pedal a little lighter until cranking up the output (which still isn't much.) Perhaps developing slightly better habits would help your son?
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 07-16-14 at 10:14 PM.