Chain Whip Won't Work - Help!
#1
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Chain Whip Won't Work - Help!
Hi everyone,
I am attempting to change a 9 speed cassette on my bike. The cassette is worn but not crazily so. To assist, I am using a Park Tool SR-1 Sprocket Remover/Chain whip with Header. When I have done this in the past, the process has been smooth. Unfortunately, as soon as I apply any pressure to the lock rig, the chain on the chain whip keeps jumping off whatever cog I place it on to hold the cassette in place. I have had other people hold the chain whip and it still jumps off the cogs. I have only changed a few cassettes with the whip so it is in pretty new shape. A picture of the cassette is below. What is causing this? what is the solution?
Thanks,
Neil
I am attempting to change a 9 speed cassette on my bike. The cassette is worn but not crazily so. To assist, I am using a Park Tool SR-1 Sprocket Remover/Chain whip with Header. When I have done this in the past, the process has been smooth. Unfortunately, as soon as I apply any pressure to the lock rig, the chain on the chain whip keeps jumping off whatever cog I place it on to hold the cassette in place. I have had other people hold the chain whip and it still jumps off the cogs. I have only changed a few cassettes with the whip so it is in pretty new shape. A picture of the cassette is below. What is causing this? what is the solution?
Thanks,
Neil
#2
Senior Member
Join Date: Dec 2006
Location: So Cal
Posts: 2,678
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I see nothing wrong with the condition of cassette that would case you any serious trouble removing the lock ring.
If your doing it like this it should come off https://www.youtube.com/watch?v=QXQ3R3qdc_c
If your doing it like this it should come off https://www.youtube.com/watch?v=QXQ3R3qdc_c
__________________
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
It may not be fancy but it gets me were I need to go.
https://www.jtgraphics.net/cyclist_bicycles.htm
#3
Senior Member
Join Date: May 2011
Location: Upstate NY
Posts: 3,794
Bikes: Bianchi San Mateo and a few others
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Likes: 0
Liked 13 Times
in
9 Posts
I haven't removed as many cassettes as some of the other guys around here, but I've done a few and it's difficult to imagine you can't use a chain whip to grab at least one of the cogs on your cassette. It's gotta be a matter of technique.
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,505
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5681 Post(s)
Liked 2,386 Times
in
1,320 Posts
Just to confirm, you use the chain whip to pull (hold) the cassette forward as if you were driving the wheel, and the lock ring tool pulls in the opposite direction. That means the free end of the chain will be wrapping around to the left, with the end about 180 degrees counter-clockwise of the pulling bar.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Hi all,
Thanks for the responses. I have actually watched the Spin Doctors video linked above a few times but am not seeing why I can't get the chain whip to stay seated. I feel like I am doing everything suggested above. Are there other tips you all can offer? I have to be overlooking something simple....
Thanks for the responses. I have actually watched the Spin Doctors video linked above a few times but am not seeing why I can't get the chain whip to stay seated. I feel like I am doing everything suggested above. Are there other tips you all can offer? I have to be overlooking something simple....
#6
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times
in
508 Posts
Here's a tip - modify your chainwhip.
IMO and IME chainwhips are wrong.
Undo one end of the little loop, and join it onto the whip end, so you only have a large loop.
@ everyone:
IMO and IME chainwhips are wrong.
Undo one end of the little loop, and join it onto the whip end, so you only have a large loop.
@ everyone:
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
#7
Senior Member
Join Date: Apr 2006
Location: Gig Harbor, WA
Posts: 2,470
Bikes: Surly Long Haul Trucker, Gary Fisher Hoo Koo E Koo, Dahon Mu P 24 , Ritchey Breakaway Cross, Rodriguez Tandem, Wheeler MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wrap the chain whip almost all the way around the cassette, then hold it in place with a rubber band. It's hard to imagine it not holding
#8
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times
in
508 Posts
You know how many knuckles have ever been skinned because that was hard to imagine?
Worn cogs, unused chain, shouldn't be such a surprise.
Worn cogs, unused chain, shouldn't be such a surprise.
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
#10
Senior Member
Join Date: Jun 2014
Location: texas
Posts: 193
Bikes: '86 Raleigh marathon, '09 Fuji newest 4.0, 2001 Cannondale R600
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've had some success using an old chain wrapped all the way around cassett, locked in place with vice grips, then a pair of channel locks as whip handle to hold while unlocking ring
#11
Senior Member
Join Date: Dec 2010
Location: Above ground, Walnut Creek, Ca
Posts: 6,681
Bikes: 8 ss bikes, 1 5-speed touring bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
i've had success wrapping a towel or rag around the teeth and wedging or tying the rest in or around the chainstay, but don't blame me if you break something.
and i'm always careful to go easy when tightening lockrings. IME, they don't need much.
and i'm always careful to go easy when tightening lockrings. IME, they don't need much.
#12
LET'S ROLL
#13
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,505
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5681 Post(s)
Liked 2,386 Times
in
1,320 Posts
To the OP.
Since you were able to post a photo of the cassette, why not post the photo that would most help us solve your problem?
That would be one of the chain whip assembled onto the cassette as you're doing. We don't need to see the lockring tool since that doesn't seem to be the issue.
Since you were able to post a photo of the cassette, why not post the photo that would most help us solve your problem?
That would be one of the chain whip assembled onto the cassette as you're doing. We don't need to see the lockring tool since that doesn't seem to be the issue.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#14
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
To the OP.
Since you were able to post a photo of the cassette, why not post the photo that would most help us solve your problem?
That would be one of the chain whip assembled onto the cassette as you're doing. We don't need to see the lockring tool since that doesn't seem to be the issue.
Since you were able to post a photo of the cassette, why not post the photo that would most help us solve your problem?
That would be one of the chain whip assembled onto the cassette as you're doing. We don't need to see the lockring tool since that doesn't seem to be the issue.
I will arrange for a photo tomorrow. In the interim, I purchased a couple small clamps at home depot to pin down the chain as suggested above. This helped but ultimately my clamps flew off the chain after I really cinched down the pressure. I will try to position them better tomorrow. I have also put some liquid wrench penetrating oil into the lockring. The video linked by 1nterceptor above showed a man using a giant plumbers pipefitting wrench. I will look into borrowing one. Thanks everyone for the recommendations.
#15
Senior Member
Join Date: Aug 2012
Location: Colorado Springs
Posts: 1,134
Bikes: Borealis Echo, Ground Up Designs Ti Cross bike, Xtracycle, GT mod trials bike, pixie race machine
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
This is an amazing tool, especially if you have an extremely worn cassette.
https://pedros.com/products/tools/cas...ain/vise-whip/
https://pedros.com/products/tools/cas...ain/vise-whip/
#16
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,533
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1520 Post(s)
Liked 716 Times
in
508 Posts
FFS, people...
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
#17
Full Member
Thread Starter
Join Date: Dec 2009
Posts: 392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
This is an amazing tool, especially if you have an extremely worn cassette.
https://pedros.com/products/tools/cas...ain/vise-whip/
https://pedros.com/products/tools/cas...ain/vise-whip/
wow, that Pedros tool is plain scary looking. Thanks for the tip!
#19
Senior Member
Join Date: Mar 2012
Location: southeastern PA - a mile west of Philadelphia
Posts: 430
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I simply wrap a spent chain (which I retain specifically for cassette removals) around the largest cog on the cassette and wrap the other end of the chain (in overlapping fashion) several times around a piece of 2 by 3 which I chock against the rear of the tire on the floor as though it were a wheel chock (see pics). This causes the required loosening torque to pull the tire against the wrapped portion of chain around the 2 by 3 thus binding the chain against the 2 by 3 as loosening torque is applied.
Notice that roughly 3/4 of the large cog gets wrapped by the chain (the more teeth the better for improved grip). Some professional chain whips won’t wrap this much chain around the large cog, so this technique works better than many chain whips.
NOTE: I only had a rear wheel with a 13-28 freewheel available to take these shots just a few moments ago, but it was good enough to demonstrate the gist of the technique I successfully use when removing my cassettes.
I hope you find this helpful.
Notice that roughly 3/4 of the large cog gets wrapped by the chain (the more teeth the better for improved grip). Some professional chain whips won’t wrap this much chain around the large cog, so this technique works better than many chain whips.
NOTE: I only had a rear wheel with a 13-28 freewheel available to take these shots just a few moments ago, but it was good enough to demonstrate the gist of the technique I successfully use when removing my cassettes.
I hope you find this helpful.
#20
Senior Member
Join Date: Aug 2012
Location: Colorado Springs
Posts: 1,134
Bikes: Borealis Echo, Ground Up Designs Ti Cross bike, Xtracycle, GT mod trials bike, pixie race machine
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
It is basically a pair of vice grips that go around one of the smaller cogs without damaging them. It is super solid, we have had to throw a breaker bar on the end of it for more leverage when someone grossly over tightened a cassette that needed removed. No matter how worn the cog is, the tool will not slip. Great tool but kinda pricey for home use.
#21
Senior Member
@ 2:05 in that video. What's funny is, all else is pretty sane recommendations & he seems to truly care & know but MAN......that cassette wrench choice is uhhhhhh..........well.....
#22
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,505
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5681 Post(s)
Liked 2,386 Times
in
1,320 Posts
If all else fails, you can always wrap the chain around a smaller sprocket (or use a longer chain) so it's long enough to wind back onto itself. That way the bar itself will hold the end down and make any unwinding or slippage impossible.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#23
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,639
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 507 Post(s)
Tagged: 0 Thread(s)
Quoted: 7251 Post(s)
Liked 2,322 Times
in
1,357 Posts
Since this is a problem of technique and not equipment, I say pull a friend in and work on this together. Put your minds and two pairs of eyes together. You'll figure it out.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#25
Senior Member
Has anybody here, ever used a pipe-wrench on their cassette before**********