Freewheel removal tool for rare Sachs single speed freewheel (bmx?)?
08-14-09, 03:57 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2003
Location: arlington, VA
Posts: 1,764
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Freewheel removal tool for rare Sachs single speed freewheel (bmx?)?
I have a Turner AWD system installed on one of my mountain bikes. The front wheel has a single speed Sachs freewheel that may need replacing due grit in the freewheel. I'm speculating this mates to the same Park FR-6 tool as is common on most bmx freewheels, but thought I could give some dimensions to confirm before I order the tool.
The freewheel has a 4 notch removal pattern, the outside diameter of the cross notches is about 40mm, the notches are individually 2mm deep radially and 8 mm wide about the circumferential arc.
Are these the dimensions for a freewheel that mates with the Park FR-6?
If not, any other candidates?
The freewheel has a 4 notch removal pattern, the outside diameter of the cross notches is about 40mm, the notches are individually 2mm deep radially and 8 mm wide about the circumferential arc.
Are these the dimensions for a freewheel that mates with the Park FR-6?
If not, any other candidates?
