odyssey gyro 3 on danscomp, not 1"
is it a threaded or unthreaded gyro setup, i cant tell by the pictures, need a lil help
|
It is 1 1/8" - Unthreaded
|
ok because it looks like there is some big lock nuts in between there, so wats better, gyro xl or that one on danscomp
|
bmxtrix, srry for buggin u, but do u know wat im talkin about ^^^^^^^
|
Sorry, my bad. Odyssey & SST both make detanglers in 1" and 1 1/8". Either are excellent. The GTX-R is the best of the detanglers available, but pricey.
The thing that looks like a lock nut between the plates, is in fact a lock nut. The photo is a STOCK photo from Odyssey and both photos (1" and 1 1/8") use the same photo of a 1" detangler. The 1 1/8" detangler will not have that nut in between. That nut is strictly part of your HEADSET and would not come with any detangler. Your detangler should include: Upper plate Middle piece (detangler) Lower plate Maybe brake cables, depending on which one you buy. That's all it'll come with, the rest is determined by your bike. |
well some of em have a welded on lower plate, dont they?
|
Some FRAMES have a welded lower gyro plate, and some stems have built in or attachable upper plates.
But ALL Gyros and Orygs ship with an upper and a lower plate anyway. |
well i have a gyro xl and it doesnt fit my lower welded on gyro tab, i think ill have to get one off of danscomp, or my local bike shop, im not sure yet
|
What doesn't fit? That makes no sense. You don't use the lower plate that comes with the gyro, you just use the ones on your bike, then use a gyro cable.
If the lower gyro cable doesn't fit through the tabs on your bike, then get a new gyro cable or london mod setup and do it that way. |
ok the chrome part (srry i dont know much about gyros), when i put the chrome part on its too wide to fit with the lower welded on gyro tabs, ill screw the cables up there and the chrome part is too wide too work, because its an xl, ill just get a smaller one, no biggy
|
If your frame is 1" then that would be the only issue. Usually it is really hard to get in place lower cables though because the gyro plate is disigned to pull the cables onto the gyro. Otherwise, the XL is 1 1/8", not bigger or different than the other ones at all.
|
mine is 1 and 1/8, its a 2003 haro mirra flair, which is 1 and 1/8
|
Are you having a hard time getting the lower cable knobs in to the rotor (Gyro)? If so than just unhook your brakes or have someone squeeze them closed for slack.
|
nah, i just decided to get a gyro that fits, im pretty sure the gyro xl is meant for bikes without lower welded on gyro tabs, no problem though, ill be goin to my bike shop anytime now to get the parts i ordered, i think thats the best way to go, order all the parts at ur local bike shop and u dont have to pay for shipping
|
definately, good way to go
|
All times are GMT -6. The time now is 01:09 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.