Bike Forums

Bike Forums (http://www.bikeforums.net/forum.php)
-   BMX (http://www.bikeforums.net/bmx/)
-   -   Building the first BMX.. (http://www.bikeforums.net/bmx/879647-building-first-bmx.html)

proileri 03-24-13 08:07 PM

Building the first BMX..
 
I've been thinking about getting a BMX for fooling around a bit, mostly for street/park, but maybe looking into racing a bit later.. So today I saw this 21,5 TT frame on discount, that should fit my 6' frame, and thought why not rescue the poor thing :lol:

I'm ok in the shop, due to maintaining my MTB and road bike, but wanted to ask if there's something that's different with a BMX build? Also, as an adult guy at around 170 lbs, is there something I should know about components, are there things I should avoid?

Street rider 03-24-13 09:02 PM

20.5 is going to be a bit small for you. You should look at something like a 21 up to a 21.25. As far as things to avoid, Eastern was always bunk in my experience. Although I haven't seen/handled any of their stuff in a few years.

As for maintenance and all that, its basically all the same. Bikes is bikes. The only thing that you might find different is the BB cluster/assembly, because the bearings are larger, and the cranks are a bit different than something for road or MTB use.

vcjv 04-05-13 10:06 AM

Quote:

Originally Posted by Street rider (Post 15427270)
20.5 is going to be a bit small for you. You should look at something like a 21 up to a 21.25. As far as things to avoid, Eastern was always bunk in my experience. Although I haven't seen/handled any of their stuff in a few years.

As for maintenance and all that, its basically all the same. Bikes is bikes. The only thing that you might find different is the BB cluster/assembly, because the bearings are larger, and the cranks are a bit different than something for road or MTB use.

I think he said in his post he found a 21.5 frame, unless im seeing things, otherwise yeah it can be similar, just make sure you get as much chromoly parts as possible, as its stronger then hi tensil steel and aluminum. Racing is much different from street/park and youll probably want a whole different set up for that.

Street rider 04-05-13 07:23 PM

I read it wrong. I saw a 0 instead of a 1. Had a moment of stoopit. In my defense though, why the hell would you use a comma instead of a period for that?

proileri 04-06-13 05:30 AM

Quote:

Originally Posted by Street rider (Post 15475594)
I read it wrong. I saw a 0 instead of a 1. Had a moment of stoopit. In my defense though, why the hell would you use a comma instead of a period for that?

While I'm not sure what difference would it make, it's Continental European (aka non-British) way of writing numbers.. it's you English-speakers who have it wrong ;)

Street rider 04-06-13 09:16 AM

I know a few Europeans, and they use a period instead of a comma. And when you look at it, doesn't it just look more legible?

proileri 04-06-13 11:58 AM

Quote:

Originally Posted by Street rider (Post 15476926)
I know a few Europeans, and they use a period instead of a comma. And when you look at it, doesn't it just look more legible?

Do they live in the States? People from British Isles use a period, while France, Germany, Italy, Spain etc. use a comma. I have to admit it's been a PITA for me to remember which is the correct way to write numbers and when - especially considering due to my university education I'm supposed to be able to write correct professional text both in English and in my native tongue :p

Street rider 04-06-13 01:09 PM

Yea, in the States. But have you bought a bike/parts to build?

vcjv 04-06-13 08:53 PM

Haha I understand the confusion, and yeah did you ever get the bike going?

proileri 04-07-13 03:40 AM

Stuff is still in the mail, unfortunately! That's ok, since the streets here in the "European Alaska" still have some ice, and I've been busy getting my other bikes ready.

I got the 21.5" frame here, and I noticed that they're still blowing out last year's models, so I have one bike with a 20.8" frame incoming I can use to scavenge the parts. Seems to use a different BB, but otherwise should be good.

Notice that the numbers are now written in "US" so you guys can understand them! I don't mind the punctuation, but if we only could get you to use the metric system.. ;)

Street rider 04-07-13 11:55 AM

Sounds like you're pretty much set to go on the bike haha. Goodluck getting all the parts swapped over

proileri 04-08-13 03:10 AM

Quote:

Originally Posted by Street rider (Post 15480543)
Sounds like you're pretty much set to go on the bike haha. Goodluck getting all the parts swapped over

Cheers! I was looking to get the components, but then I noticed some clearance bikes had -60% off MRSP. I don't mind having to sell an extra frame, if every component is less than half price :D

Street rider 04-08-13 07:03 AM

What frame did you buy, and what complete bike did you buy?

proileri 04-08-13 10:45 PM

Quote:

Originally Posted by Street rider (Post 15483739)
What frame did you buy, and what complete bike did you buy?

The frame is a Redline Proline alu racing frame, and the complete is a Stolen Score freestyle full cromo.

It's my first BMX, no idea what kind of stuff I'm going to do with the bike at the moment, so two different frames, lol. I'll have to take it out, and to check the local community for what's up. Racing is probably not big around here, but trails might be.

Street rider 04-09-13 06:46 AM

Definitely do NOT take a racing frame down trails. Or ride street with it. Or take it to a skatepark. The score will be able to handle all of that, but that Redline should go nowhere except the track. Also, since you bought a complete that was built for those things, a handful of the parts from the Stolen won't be able to be transferred over.

proileri 04-10-13 02:27 AM

Quote:

Originally Posted by Street rider (Post 15488110)
Definitely do NOT take a racing frame down trails. Or ride street with it. Or take it to a skatepark. The score will be able to handle all of that, but that Redline should go nowhere except the track. Also, since you bought a complete that was built for those things, a handful of the parts from the Stolen won't be able to be transferred over.

Yep, I knew there's a risk something doesn't transfer.

In the aluminium frame front, is it really that poor, considering alu frames are used in MTBs? Are there some other specifics in addition to the frame that are usually different between racing and freestyle bikes?

Street rider 04-10-13 07:49 AM

Geometry is different, so they handle differently than one another. And while downhill bikes do take quite a bit of abuse, its usually in ways that BMX bikes don't, and the stresses on the frame are a lot different. Besides, the dropouts are smaller in diameter than a frame built for the streets/park, which won't hold up to the abuse as well either.

proileri 04-11-13 10:13 AM

Quote:

Originally Posted by Street rider (Post 15493152)
Geometry is different, so they handle differently than one another. And while downhill bikes do take quite a bit of abuse, its usually in ways that BMX bikes don't, and the stresses on the frame are a lot different. Besides, the dropouts are smaller in diameter than a frame built for the streets/park, which won't hold up to the abuse as well either.

Yeah, obviously steel is better for taking a huge amounts of hits, but I was thinking alu might be fine for a bit smoother riding. I think the worst abuse for aluminum frame might be direct frame knocks, as it's softer than steel. Also, landing big jumps hard would probably eat up the rear dropouts.

Thanks for advice SR, I can always take the 20.8" steel frame out first and see what I'll use the bike for, then decide what to do regarding the frames.

Street rider 04-11-13 11:30 AM

Quote:

Originally Posted by proileri (Post 15498404)
Yeah, obviously steel is better for taking a huge amounts of hits, but I was thinking alu might be fine for a bit smoother riding. I think the worst abuse for aluminum frame might be direct frame knocks, as it's softer than steel. Also, landing big jumps hard would probably eat up the rear dropouts.

Thanks for advice SR, I can always take the 20.8" steel frame out first and see what I'll use the bike for, then decide what to do regarding the frames.

Steel actually absorbs more shock than alu does.

proileri 04-11-13 12:46 PM

Quote:

Originally Posted by Street rider (Post 15498732)
Steel actually absorbs more shock than alu does.

Smoother technique, that is :D

Street rider 04-12-13 03:05 PM

If you say so


All times are GMT -6. The time now is 07:20 AM.