"The Good, The Bad, The Bizarre"- November Parts Sale
#1
Senior Member
Thread Starter
"The Good, The Bad, The Bizarre"- November Parts Sale
I'm pretty much out of the bike flipping game at this point, so it's time to sell off my massive hoard of parts. This is likely round one of many. Assume average condition unless otherwise noted. Most of these are straight pulls from bikes, that I've made no effort to clean or pretty-up at all. If any prices are out of line with reality, feel free to make offers. I've been out of the game for a while so the listed prices are pretty rough low estimates based on ebay sold listings.
I'll do free shipping on any purchase over $40. Otherwise, PM me your zip code for a shipping estimate.
In addition to what's listed here, I also have some early Lambert parts I'm planning on ebaying- if anyone is interested in that stuff let me know.
Pictures are located here: November Parts Sale - Album on Imgur
Paypal is slattery.52@osu.edu (but don't try to email me at that address, it's a way old one).
SADDLES
[strike]Avocet Touring, nice condition[/strike] Sold
Avocet Racing II, some scuffs, see pictures $25
Serfas Rx, looks like new $25
Terry Liberator Y, good condition $25
[strike]Ideale 45- Leather is actually in decent shape for its age, but it's a bit of an ass-hatchet shape.[/strike] Sold
[strike]Wrights W3n- Leather is pretty rough, but no major splits.[/strike] Sold
PEDALS
Shimano 600 Tricolor Pedals, with clips and straps $40
CRANKSETS
[strike]Dura Ace 7410 Crankset- 180mm length. Very, very, very nice condition. Includes one chainring and self extracting bolts.[/strike] Sold
Sugino GLP Crankset, 144 bcd, 170mm length $15
Stronglight Crankset, from my Super Course. Drive side cotter is MEGA stuck in there. Includes Philips spindle. 170mm length. Some surface rust and grime but should clean up nice. $20
Nervar single drive side cottered crank arm with chainrings, 165mm length, $5
Stronglight non-drive side cottered crank arm, 170mm length, $5
BARS
Avenir(?) clamp-on aero bars, missing mounting bolts and the threads are in rough shape. $10
Cinelli Criterium 65-40 bars, 40 cm width. Unsure on clamp diameter! $25
DERAILLEURS
Suntour S1 group- chainstay mount rear derailleur, and shifter/brake lever combos. $25
[strike]Simplex Prestige group- surely there's someone out there who still likes these? Amazingly no cracks in the body of the front derailleur, though there is wear on the outer cage (see picture). Cable end is majorly stuck in the rear downtube shifter. Overall decent shape considering what it is. [/strike]Sold
[strike]Simplex Prestige rear derailleur- guide pulley is a little chewed up, but still spins smoothly.[/strike] Sold
Suntour V-GT Luxe rear derailleur, Raleigh branded- ugly, impressive amount of rust on steel bits, but fully functional. Includes claw hanger and mounting bolt (but not the little bolt that goes through the claw hanger) $15
Shimano Positron derailleur, stem shifters, and in-tact cable- this is one of those things I won't need until right after I sell it. Oh well. $10
BRAKE LEVERS
Weinmann brake levers with Carlton hoods- dirty, a little scuffed, but decent considering 40 years of use. $12
Mafac levers, missing hoods- $10
Shimano 105 STI 9 speed brifters. Left side (front) works, right side (rear) has issues as detailed in my thread here: Still functional as brake levers, obviously. $35
SEATPOSTS (left to right in picture)
SR 26.8, BAD shape- $5
Taihel Compe 25.8, $12
CRY 26.4, one bolt has been replaced with a generic one from Home Depot, some scratches- $10
FREEWHEELS
Regina Oro 13-21 5 speed, english thread, $20
Schwinn 14-28 5 speed, made in Japan so maybe an early Shimano effort? Doesn't spin quite as freely as I'd like but probably still usable. $5
SMALL PARTS
Shimano Fingertip Control Bar End, couple scuffs- $20
Huret Double Downtube Cable Stop, light rust on underside- $10
Dura Ace top tube cable clips, like new- $15
TA Specialties Dust Caps, great shape- $20
Short length of stainless Campy-style cable housing- $5
[strike]Simplex Front Skewer- [/strike] Sold
I'll do free shipping on any purchase over $40. Otherwise, PM me your zip code for a shipping estimate.
In addition to what's listed here, I also have some early Lambert parts I'm planning on ebaying- if anyone is interested in that stuff let me know.
Pictures are located here: November Parts Sale - Album on Imgur
Paypal is slattery.52@osu.edu (but don't try to email me at that address, it's a way old one).
SADDLES
[strike]Avocet Touring, nice condition[/strike] Sold
Avocet Racing II, some scuffs, see pictures $25
Serfas Rx, looks like new $25
Terry Liberator Y, good condition $25
[strike]Ideale 45- Leather is actually in decent shape for its age, but it's a bit of an ass-hatchet shape.[/strike] Sold
[strike]Wrights W3n- Leather is pretty rough, but no major splits.[/strike] Sold
PEDALS
Shimano 600 Tricolor Pedals, with clips and straps $40
CRANKSETS
[strike]Dura Ace 7410 Crankset- 180mm length. Very, very, very nice condition. Includes one chainring and self extracting bolts.[/strike] Sold
Sugino GLP Crankset, 144 bcd, 170mm length $15
Stronglight Crankset, from my Super Course. Drive side cotter is MEGA stuck in there. Includes Philips spindle. 170mm length. Some surface rust and grime but should clean up nice. $20
Nervar single drive side cottered crank arm with chainrings, 165mm length, $5
Stronglight non-drive side cottered crank arm, 170mm length, $5
BARS
Avenir(?) clamp-on aero bars, missing mounting bolts and the threads are in rough shape. $10
Cinelli Criterium 65-40 bars, 40 cm width. Unsure on clamp diameter! $25
DERAILLEURS
Suntour S1 group- chainstay mount rear derailleur, and shifter/brake lever combos. $25
[strike]Simplex Prestige group- surely there's someone out there who still likes these? Amazingly no cracks in the body of the front derailleur, though there is wear on the outer cage (see picture). Cable end is majorly stuck in the rear downtube shifter. Overall decent shape considering what it is. [/strike]Sold
[strike]Simplex Prestige rear derailleur- guide pulley is a little chewed up, but still spins smoothly.[/strike] Sold
Suntour V-GT Luxe rear derailleur, Raleigh branded- ugly, impressive amount of rust on steel bits, but fully functional. Includes claw hanger and mounting bolt (but not the little bolt that goes through the claw hanger) $15
Shimano Positron derailleur, stem shifters, and in-tact cable- this is one of those things I won't need until right after I sell it. Oh well. $10
BRAKE LEVERS
Weinmann brake levers with Carlton hoods- dirty, a little scuffed, but decent considering 40 years of use. $12
Mafac levers, missing hoods- $10
Shimano 105 STI 9 speed brifters. Left side (front) works, right side (rear) has issues as detailed in my thread here: Still functional as brake levers, obviously. $35
SEATPOSTS (left to right in picture)
SR 26.8, BAD shape- $5
Taihel Compe 25.8, $12
CRY 26.4, one bolt has been replaced with a generic one from Home Depot, some scratches- $10
FREEWHEELS
Regina Oro 13-21 5 speed, english thread, $20
Schwinn 14-28 5 speed, made in Japan so maybe an early Shimano effort? Doesn't spin quite as freely as I'd like but probably still usable. $5
SMALL PARTS
Shimano Fingertip Control Bar End, couple scuffs- $20
Huret Double Downtube Cable Stop, light rust on underside- $10
Dura Ace top tube cable clips, like new- $15
TA Specialties Dust Caps, great shape- $20
Short length of stainless Campy-style cable housing- $5
[strike]Simplex Front Skewer- [/strike] Sold
Last edited by PatTheSlat; 11-27-15 at 04:40 PM.
#3
Senior Member
Does the Ideale saddle have embossing on the side and Ideale incised on the rivets ? Can't tell from the pics.
#4
Senior Member
Thread Starter
#5
Senior Member
It does, but the embossing is quite worn down. More pictures of the saddle: Ideale Saddle - Album on Imgur
#6
Senior Member
Serfas Rx.
Men's or Woman's? I assume men's but I am hoping Woman's.
Men's or Woman's? I assume men's but I am hoping Woman's.
__________________
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7
#7
Senior Member
Thread Starter
#8
Newbie
Join Date: Jun 2008
Location: San Francisco Bay Area
Posts: 53
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can you please post more detailed pictures of the DuraAce 7410 crankset? I would like to see the both sides of the crank arms with details of imprints.
Thanks
Thanks
#9
Senior Member
Thread Starter
#10
Newbie
Join Date: Jun 2008
Location: San Francisco Bay Area
Posts: 53
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am interested in the Dura Ace 7410 crankset.
Since I do not have enough posts under my belt, can you please send me a PM with you email address and PayPal Id.
Thanks
Since I do not have enough posts under my belt, can you please send me a PM with you email address and PayPal Id.
Thanks
#11
PM me your cotters
Join Date: Jun 2015
Location: ATL
Posts: 3,241
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 1137 Post(s)
Liked 590 Times
in
422 Posts
If you'd do a combined $30 shipped on the Simplex stuff (group + RD + skewer), I'd take that stuff off your hands. I've got a frame or two that could use it.
#12
Senior Member
Thread Starter
Had someone interested in the RD a couple days ago, I'm gonna give him til this evening to get back to me on it. I'll let you know.
#13
Senior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
PatTheSlat
Classic and Vintage Sales
7
10-23-17 05:07 PM
Brewsmith
Classic and Vintage Sales
13
04-11-16 06:28 AM
Brewsmith
Classic and Vintage Sales
5
01-09-16 02:41 PM
4funbikes
Classic and Vintage Sales
11
09-28-15 07:49 AM