Looking for some Suntour and Nitto, and maybe a Mighty.
01-18-15, 09:18 PM
#1
Senior Member
Thread Starter
Looking for some Suntour and Nitto, and maybe a Mighty.
Looking for a rear derailleur Suntour V or V luxe, or Something in the V lineup. Hoping for as clean as possible, and short cage.
As for the Nitto parts. Looking for a Universiade bar in at least a 40, hopefully a 41 or wider. Also looking for a Nitto stem, 90-100mm(standard stem that says Nitto on the side).. The stem and bars should fit each other obviously.
Also looking for a Sugino Mighty crankset, depending on price..,,,,BD
As for the Nitto parts. Looking for a Universiade bar in at least a 40, hopefully a 41 or wider. Also looking for a Nitto stem, 90-100mm(standard stem that says Nitto on the side).. The stem and bars should fit each other obviously.
Also looking for a Sugino Mighty crankset, depending on price..,,,,BD
01-18-15, 09:21 PM
#2
Senior Member
Might have the Sugino Mighty. Let me check tommorow.
__________________
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,'81 Merckx, '85 Centurion Cinelli, '85 Raleigh Portage, '92 RB-2, '09 Bianchi
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,
01-18-15, 09:54 PM
#3
Senior Member
Join Date: Oct 2014
Location: Tucson
Posts: 283
Bikes: Trek TX900.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a VX. It is a short cage "p" designation. I was told the p indicated a lighter version. If you like pm me. Thanks.
01-18-15, 10:09 PM
#4
Unimatrix Zero
Join Date: Sep 2009
Posts: 908
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have this Nitto 90mm 25.4 stem. $20 shipped
https://www.flickr.com/photos/76468912@N07/15596594834/
https://www.flickr.com/photos/76468912@N07/15596594834/
01-19-15, 04:58 PM
#6
Senior Member
Thread Starter
I have the stem paying on paypal soon. And the bars I found on the bay for a decent price. If you have the deralleur then I'm set. I will PM when I get home in a while. Thanks! 
,,,,BD
,,,,BD
01-22-15, 10:54 PM
#8
Senior Member
Thread Starter
Still looking for a Mighty crankset. Hopefully a drillium ringed model.,,,,BD
Yeah, I am eyeing the one on the bay for $170 shipped from Hungary. Not sure I want to pay quite that much, unfortunately.
.,,,,BDYeah, I am eyeing the one on the bay for $170 shipped from Hungary. Not sure I want to pay quite that much, unfortunately.
01-23-15, 09:25 PM
#9
Senior Member
What I thought was Mighty turned out to be a Super Maxy from Sugino, so I'm out.
__________________
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,'81 Merckx, '85 Centurion Cinelli, '85 Raleigh Portage, '92 RB-2, '09 Bianchi
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,
01-23-15, 11:22 PM
#10
Senior Member
Thread Starter
The more I look at my orphan drillium Superbe cranks, the more it looks almost exactly like the Mighty version with drilled rings. I can put the original cranks back on my 80 Super Course, and see how they look as a pseudo Mighty.
This is the crank I have, but there are small diameter holes drilled in both rings.
VeloBase.com - Component: SunTour CW-1000, Superbe
And the Mighty. From 5 or 10 feet it could work for a while anyway. Also not drilled, but you get the ldea
VeloBase.com - Component: Sugino Mighty (road)
This is the crank I have, but there are small diameter holes drilled in both rings.
VeloBase.com - Component: SunTour CW-1000, Superbe
And the Mighty. From 5 or 10 feet it could work for a while anyway. Also not drilled, but you get the ldea
VeloBase.com - Component: Sugino Mighty (road)
Last edited by Bikedued; 01-23-15 at 11:45 PM.
01-27-15, 06:22 AM
#11
Senior Member
Thread Starter
Just made an offer on a Mighty on the bay. We'll see what happens. I have learned that the mighty and Superbe have the same BCD, being made by the same company and all. I will just swap the drilled rings from my Superbe onto the Mighty, and be done with my search.,,,,BD
01-27-15, 09:29 AM
#12
Junior Member
Join Date: Apr 2008
Location: deep in the heart of jersey
Posts: 170
Bikes: 79-80 derosa 80 merckx 89 peugeot dolomites 93 bianchi tsx
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I also have aset of the arms only if ebay doesnt pan out
01-27-15, 09:42 AM
#13
Senior Member
Thread Starter
How is the anodizing? They can can get a little iffy if left outdoors, and can't really be polished. Ebay guy refused two reasonable offers so I'm done.,,,,BD
02-06-15, 05:13 PM
#17
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7346 Post(s)
Liked 2,452 Times
in
1,430 Posts
I have a V Luxe derailleur. I think it's in the country, where I won't be for a couple of weeks. Please email me at the address below. It might be here in the city.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Dougbloch
Classic and Vintage Sales
11
05-23-18 10:42 PM
vintagerando
Classic and Vintage Sales
4
09-17-15 07:27 AM
