Stumpjumper replacement fork
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Location: Oakland, CA
Posts: 16
Bikes: SOMA Rush, 1986 Raleigh Alyeska, 1984 Trek 520,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stumpjumper replacement fork
I recently purchased a 1984 Stumpjumper frame off of craigslist. The frame did not come with a fork. No problem I thought, I've got a nice chrome biplane fork just perfect for this at home. Get home grab the fork and nope, about an inch too short. That's OK, I think I've got a nice lugged fork off a MB-3 in storage. Go grab it and no even shorter.
So my question is if anyone here knows a good resource for lugged 26 in forks with threaded 1 in steerer tubes and canti posts?
So my question is if anyone here knows a good resource for lugged 26 in forks with threaded 1 in steerer tubes and canti posts?
#2
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Check out Soma.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#3
Senior Member
Doesn't look like the Soma options include a lugged mtb.
Lugged is going to be the hard part. Seems like most mtb rigid forks are unicrown, unfortunately.
I would put a wtb ad on CL. Maybe somebody has one collecting dust from a suspension fork "upgrade."
You could also try the 'for trade' thread here; maybe offer your shorter one in exchange. Stranger things have happened.
Lugged is going to be the hard part. Seems like most mtb rigid forks are unicrown, unfortunately.
I would put a wtb ad on CL. Maybe somebody has one collecting dust from a suspension fork "upgrade."
You could also try the 'for trade' thread here; maybe offer your shorter one in exchange. Stranger things have happened.
#4
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
Lugged? A few show up on the big auction site from time to time. Tons of non-lugged ones there for cheap, also.
I happen to have one sitting around, although with a 150mm steer tube, it's probably way too short for you.
I happen to have one sitting around, although with a 150mm steer tube, it's probably way too short for you.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Last edited by Lascauxcaveman; 05-28-15 at 10:49 AM.
#5
Junior Member
Thread Starter
Join Date: Aug 2012
Location: Oakland, CA
Posts: 16
Bikes: SOMA Rush, 1986 Raleigh Alyeska, 1984 Trek 520,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The head tube is 175mm so even the used market is going to be tough.
Just figured I'd ask here before ordering a sunlight unicrown. My dedication to aesthetics is second to my desire to ride it.
Thanks for the responses guys.
Just figured I'd ask here before ordering a sunlight unicrown. My dedication to aesthetics is second to my desire to ride it.
Thanks for the responses guys.
#6
Banned
Nova Cycle supply has the biplane looking fork crowns that may be close in looks . for a custom Fork build.
I managed to find a Chromed sloping crown Tange fork 25 years ago , that I am using now in my Stump jumper sport.
I managed to find a Chromed sloping crown Tange fork 25 years ago , that I am using now in my Stump jumper sport.
#7
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
One option is to consider suspension fork. I found one on CL after years of looking. Opps THREADED.... Never mind. Tall head tubes make it hard to find forks with a steerer that is long enough, even for threadless.
So keep looking, you may find one. See this thread capturing my experience, start with post #86 .
So keep looking, you may find one. See this thread capturing my experience, start with post #86 .
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#8
Banned
84 precedes suspension forks they would be raising the head tube Up and altering the HTA as a Result.
#9
Senior Member
I wanted a 26 in. lugged mtb fork too, and just had to troll ebay until the opportunity presented itself. Usually there is no detail and it's a leap of faith in terms of steerer length, crown race size, etc. I also had to extend the keyed slot on the one I bought to make it work (luckily have a friend with a mill). There's also the possibility of grabbing a whole bike off CL...if one pops up with lugs on it.
#10
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 424 Times
in
283 Posts
Don,
Smirking here as I'm sort of in the same situation. My Stumpjumper as acquired came with a 26" fork but a really weird one. Obviously was changed out at some time. Neat looking bi-plane crown but cheaper stamped fork ends and NO cantilever bosses. It had a side pull brake caliper with typical center pivot mount. You're welcome to this fork for free.
Actually, prior I've offered the entire bike for a nominal amount to even free...LOL.
No takers so I changed my mind and decided to keep as a Winter rider, loaner, etc.. I'm calling it the Specialized Chainbreaker.
In continuation, I decided against brazing canti bosses for the above and in place acquired a NOS but a chrome fork with brake bosses. Its stamped 'Spinner'. Big beefy and beautiful. Cast crown, quality throughout, heavier duty ends, nicely done bosses. Problem is, I don't have a clue what thread it uses. I took it to a LBS and sorted through all their drawers of new and old headstock parts. No such luck. One of these days I'll have to take it to another, but for now the bike remains apart.
Smirking here as I'm sort of in the same situation. My Stumpjumper as acquired came with a 26" fork but a really weird one. Obviously was changed out at some time. Neat looking bi-plane crown but cheaper stamped fork ends and NO cantilever bosses. It had a side pull brake caliper with typical center pivot mount. You're welcome to this fork for free.
Actually, prior I've offered the entire bike for a nominal amount to even free...LOL.
No takers so I changed my mind and decided to keep as a Winter rider, loaner, etc.. I'm calling it the Specialized Chainbreaker.
In continuation, I decided against brazing canti bosses for the above and in place acquired a NOS but a chrome fork with brake bosses. Its stamped 'Spinner'. Big beefy and beautiful. Cast crown, quality throughout, heavier duty ends, nicely done bosses. Problem is, I don't have a clue what thread it uses. I took it to a LBS and sorted through all their drawers of new and old headstock parts. No such luck. One of these days I'll have to take it to another, but for now the bike remains apart.
#11
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,650
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,704 Times
in
937 Posts
I guess the nice thing is you can always keep an eye out for something that'll look good on there.
Although it's still a unicrown, I have a soft spot for the lugged unicrown forks. I think the thought was that the regular welding wouldn't be strong enough for a fork, so they devised a lug that was brazed to the end of the steerer and then the bent fork legs were brazed into. It was just for that 1986/87 timeframe- Like roller cams...
Sorry I don't have a decent pic.
But the Biplane forks are a thing of beauty.
Although it's still a unicrown, I have a soft spot for the lugged unicrown forks. I think the thought was that the regular welding wouldn't be strong enough for a fork, so they devised a lug that was brazed to the end of the steerer and then the bent fork legs were brazed into. It was just for that 1986/87 timeframe- Like roller cams...
Sorry I don't have a decent pic.
But the Biplane forks are a thing of beauty.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#12
Junior Member
Thread Starter
Join Date: Aug 2012
Location: Oakland, CA
Posts: 16
Bikes: SOMA Rush, 1986 Raleigh Alyeska, 1984 Trek 520,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yeah I was pretty bummed my biplane didn't fit.
As for lugged unicrown forks, while they do look nice I'd be scouring the internet just as hard so I might as well aim high.
I'll just but a new unicrown and keep an eye out.
As for lugged unicrown forks, while they do look nice I'd be scouring the internet just as hard so I might as well aim high.
I'll just but a new unicrown and keep an eye out.
#13
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 293 Times
in
216 Posts
I have a 1983 (I think) Stumpjumper Sport frame and fork, but the frame has a crack in it. So really, all I have is the fork. Funny how the universe keeps things in balance, eh?
Thread
Thread Starter
Forum
Replies
Last Post
SeraphimF
General Cycling Discussion
14
05-09-18 06:59 PM