Left handed brakes
12-04-15, 09:35 PM
#26
Senior Member
Join Date: Jun 2015
Location: Melbourne, Australia
Posts: 705
Bikes: 1974 Copper Raleigh International, 1975 Olive Green Raleigh Grand Prix, 1974 Raleigh Europa Custom
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Like BMX rider said. I use the back brake to wash off speed. if the wheel locks up the skid is controlled. I use the front brake only when I've slowed down. Too many endo's I've learnt my lesson.
12-05-15, 02:55 AM
#27
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,417
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Liked 1,000 Times
in
513 Posts
I am left handed and, like all the other lefties, I have learned to adapt to a right handed world. I like my brakes set up in the more common left-front, right-rear configuration. It's not a matter of dominance or strength, it's just for consistency. In a panic stop, you go with what you are used to, so you don't have time to think about which lever is for which brake.
Unless they want you to do it differently, I would follow the normal convention and use left-front, right-rear.
Unless they want you to do it differently, I would follow the normal convention and use left-front, right-rear.
12-05-15, 06:24 AM
#28
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Good point. I would think the dynamic behavior of an MTB is very different from a road bike.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
12-05-15, 07:20 AM
#29
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
70% of braking force is on the front. Go with the front for the most reactive hand.
For motorcycles, clutched on the left, it allowed for panic stops without drivetrain interference.
For motorcycles, clutched on the left, it allowed for panic stops without drivetrain interference.
12-05-15, 02:24 PM
#30
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Rat City, WA
Posts: 462
Bikes: Peugeot Course, Motobecane Super Mirage(RIP), Peugeot PKN10e Motobecane Grand Touring
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 13 Times
in
10 Posts
I reminisce about my Schwinn Varsity,
It had a serious bulge in the front rim from hitting a curb to hard.
Which caused a pulsating feel to the front brake.
Even worst it would lock up if I wasn't careful.
It had a serious bulge in the front rim from hitting a curb to hard.
Which caused a pulsating feel to the front brake.
Even worst it would lock up if I wasn't careful.
12-05-15, 10:07 PM
#31
Senior Member
Join Date: Mar 2014
Location: Hopkinton, MA
Posts: 1,538
Bikes: 1938 Raleigh Record Ace (2), 1938 Schwinn Paramount, 1961 Torpado, 1964? Frejus, 1980 Raleigh 753 Team Pro, Moulton, other stuff...
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
"Left handed brakes"? Do they work in the opposite manner of right-handed brakes?
For me: Front brake to right hand.
YMMV
For me: Front brake to right hand.
YMMV
12-05-15, 10:16 PM
#32
Senior Member
Join Date: Jan 2013
Posts: 2,678
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 580 Times
in
408 Posts
The one and only reason I use right rear is for convenience when drive maintenance, tuning or building on a stand. I can reach up easily and stop the rear wheel from the drive side.
12-05-15, 11:06 PM
#33
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Something out of the norm for a single rider but where I've been accustomed to scrubbing off speed on a tandem (having near double the mass). On one particular bike I'm using a dual caliper pull single lever mounted on the right side. Zero on the left.
For the tandem, the right lever pulls both front and rear brake--- its the primary. Brake bias is set more to the front. (The left lever only operates a 'drag' drum brake. Not much use for stop braking but primarily serves in controlling speed in long or fast descent further dissipating heat and transfer to the tire.)
I figured the right dual pull lever works so well, why not try it on a conventional single lightweight. Works perfect and rather like the modulation. Weirdly it naturally balances under hard braking in the wet and very confident.
There are few things that negate the dual pull single lever such as not being able to ride the hood hand position and should a mild crash happen wrecking the only lever, well that ends the day.
For the tandem, the right lever pulls both front and rear brake--- its the primary. Brake bias is set more to the front. (The left lever only operates a 'drag' drum brake. Not much use for stop braking but primarily serves in controlling speed in long or fast descent further dissipating heat and transfer to the tire.)
I figured the right dual pull lever works so well, why not try it on a conventional single lightweight. Works perfect and rather like the modulation. Weirdly it naturally balances under hard braking in the wet and very confident.
There are few things that negate the dual pull single lever such as not being able to ride the hood hand position and should a mild crash happen wrecking the only lever, well that ends the day.
Last edited by crank_addict; 12-05-15 at 11:13 PM.
12-06-15, 01:48 AM
#34
Retro on steroids
Join Date: Feb 2006
Location: Marin County, California
Posts: 536
Bikes: Breezer Repack 650-B, 2011 Gary Fisher Rumblefish II, Gary Fisher HiFi 29er, 1983 Ritchey Annapurna, 1994 Ritchey P-21, 1978 Breezer #2, 1975 Colnago, Ritchey P-29er
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 154 Post(s)
Liked 624 Times
in
131 Posts
My front brake is the right hand. I don't have a particular reason. I don't ride motorcycles.
I'm sure no one except me cares about that.
I'm sure no one except me cares about that.
12-06-15, 02:30 AM
#35
Senior Member
I'll cast another vote for deciding based on traffic, not the rider's being left or right handed. Riding in the US, I'm more concerned with signaling left turns and being able to brake, so my preference is to have the right hand control the front brake (stronger braking) while being able to signal with the left hand. I've switched most of the bicycles that I ride frequently.
Obviously, this preference can and should be over ruled in the case of the riders preferences or injuries. I'll also admit that I'm glad the rod brakes on the Raleigh DL1 are set up for the front brake with the right hand. I have no desire to try to switch the brake attachments for the rods, so I'm glad they are set up well for US braking.
Obviously, this preference can and should be over ruled in the case of the riders preferences or injuries. I'll also admit that I'm glad the rod brakes on the Raleigh DL1 are set up for the front brake with the right hand. I have no desire to try to switch the brake attachments for the rods, so I'm glad they are set up well for US braking.
12-06-15, 06:53 AM
#36
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
If the front is on the left, you get full braking while also being able to shift with the right.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
12-06-15, 07:01 AM
#37
Senior Member
Join Date: Jul 2014
Location: Middelbury, Vermont
Posts: 1,105
Bikes: Giant Escape 1
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 136 Post(s)
Likes: 0
Liked 4 Times
in
2 Posts
If you expect to be riding in traffic, then the answer is NO. The let hand is used for turn signals and you'd rather be breaking the back wheel than the front in those situations. If you're mostly riding trails or whatever where turn signals don't apply, then go for it.
12-06-15, 08:17 AM
#39
Zircon Encrusted Tweezers
Join Date: Nov 2008
Location: high ground
Posts: 1,346
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 260 Post(s)
Liked 128 Times
in
82 Posts
Don't mess with someones long ingrained instincts. When 'stuff happens' your actions will revert to what you know / are used to doing. My new Moulton came with the brakes switched, different from every bike I have ever ridden in my life. I didn't bother to change it to what I am used to at first thinking that it wouldn't matter, but finally did that recently. The turning point was that I needed to brake a bit while turning on a sketchy/gravelly surface and I accidentally used the unintended brake (the front), and in such instances and it added to the chances I was going to go down. I didn't go down, but my front wheel did an unpleasant sideways mini-skid before my conscious brain told my hands to switch what they were doing. If I had been feathering the back brake instead, things would have been more predictable.
12-06-15, 08:28 AM
#40
Senior Member
Join Date: Mar 2014
Location: Hopkinton, MA
Posts: 1,538
Bikes: 1938 Raleigh Record Ace (2), 1938 Schwinn Paramount, 1961 Torpado, 1964? Frejus, 1980 Raleigh 753 Team Pro, Moulton, other stuff...
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
12-06-15, 01:32 PM
#42
Senior Member
Join Date: Mar 2014
Location: Hopkinton, MA
Posts: 1,538
Bikes: 1938 Raleigh Record Ace (2), 1938 Schwinn Paramount, 1961 Torpado, 1964? Frejus, 1980 Raleigh 753 Team Pro, Moulton, other stuff...
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Hairy Hands
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
37
10-05-12 11:04 AM
