sfene

Wanted: ishiwata crosston tube stickers

Have: very clean suntour superbe brake calipers

Sfene

cudak888 

WANTED:

Track dropouts. Just the dropouts.

-Kurt

comoto

700 c or tubular 32 hole rims in silver (mavic or campy)
campy veloche 10 speed braze on front derailleur
used brooks b 17 saddle

Thanks

cyclotoine

Right Hand (drive side) lyotard Berthet later model pedal..

Have many many MANY things.

Mhendricks

Superbe Dust Caps
Shimano 600 or Dia Compe Aero brake levers with good hoods.

cudak888 

NEED:

Polished aluminum, hooked-bead 700C rims, 36h/36h. Box-section.

(For my '61 Paramount - the rounded, not hooked-bead Arayas are not holding up to the 28C tires sufficiently).

Take care,

-Kurt

Hocam

Want: White or Chrome working frame pump, silica or zefal my frame measures 47 cm from braze on to front of tube, so anything that fits that.

BikeManDan

I'm looking for rust-free seatpost binder bolts

I need at least one and as many as 5

raverson

How about 10 new generic ones for $15 with reasonable shipping?

https://cgi.ebay.com/Seat-Pillar-Pins...QQcmdZViewItem

jet sanchEz

Threaded 1 inch headset in used but good condition. Thanks!

woodenwheels

WTB: pre-90 steel lugged touring frame. 57-58cm. preferably trek, but willing to consider any good brand with good tubing. need it quick, but not like tommorrow.

Grand Bois

Campagnolo high flange front hub. Any model old enough to have a straight QR lever. A track hub would be fine, too.

Dr.Deltron

Maybe you should hit the Mill Valley swap meet Saturday!

el twe

Shimano Dura Ace AX (or similar) seatpost. The tear-drop aero one.

Mhendricks

Suntour Superbe FD (technically Superbe Pro, black and silver band) Circa 1980-1982. Mine broke today.

cadillacmike68

wanted:
Rims, old school highly polished aluminum tubular, 36H reinforced spoke nipples Mavic, Super Champion, Fiamme, Mantaro, Nisi, ambrosia or other highly regarded English, French or Italian mfr, will take a full wheel set if they are on Campy Record or Super Record hubs (36H small flange, 126mm axle, 1.370 x 24 TPI English FW threads), with double butted spokes.

Campy Super Record Brake levers I only need the drilled out levers, but will accept the levers with the handlebar clamps attached.

Campy 1st Gen Super Record rear derailleuer

Campy Super Record seatpost or Nuovo Record fluted single bolt seat post.

BikeManDan

Looking for a Sturmey Archer indicator linkage, like this:



If you have one please let me know




EDIT: Nevermind, found one on eBay for $4 shipped, hard to beat that. Still looking for any seatpost binder bolts though

seaneee

Never made it to that one. Big? Worth it?

Dr.Deltron

From what I can recall, it's been going on for 6-8 years, but this will be my first visit.

If you're interested, it's at the Strawberry Elementary School at 171 East Strawberry Rd, Mill Valley,
from 8 a.m. until 2 p.m.

cuda2k

ISO: 46cm or smaller Mixtie or woman's frame. Preferably in Oregon. PM me for details.

cudak888 

WTB:

*700C Rigida (any color label) or similar hooked-bead rims in 36h/36h - have to be polished aluminum/box pattern. No modern rims.
*Campag Record (or NR) high-flange rear hub, 36h

Take care,

-Kurt

Eyeseeu

Looking for a matching set of front and rear axle wing nuts for a set of old high flange Plume Sport hubs. Any wing nuts that fit will be fine regardless of appearance. Not sure of the thread count, but if they don't fit that is fine I would use them on some old Campy hubs I have as well.

cyclotoine

Thank I might have some Huret wingnuts or something round here, I'll go rummage and get back to you.

Eyeseeu

That would be awesome, thanks!

cyclotoine

Yeah I have a set of 2 8mm and 2 9.5mm I think they say JOVA on them but it is faint. Some of the wings are a little bent. Yours for the price of shipping if they'll work. They have the 2 part design like a track nut. Let me know.