Bianchi I.D.
#1
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bianchi I.D.
I purchased a used Bianchi Brava this past fall and am trying to figure out the model year. The seller was not the original owner and didn't know. He changed and upgraded almost all of the componets which seems to add to the difficulty of identification. I tried a couple of local shops that stock Bianchi's and one told me it was a 70's frame, the other said mid 90's.?! I also emailed Bianchi and got no response. Any help would be greatly appreciated. Here's what I can tell you for sure:
https://i162.photobucket.com/albums/t...IMG_0506-1.jpg
Serial number on the BB is: 69 18 10
Upper tube frame decal says "Tre tubi Rinforzati" Formula Two Produzione Columbus.
The fork decals say "Foderi Forcella Bianchi Formula Columbus"
The wheelset is original "Ambrosio 19 Extra Elite Durex", made in Italy. The hubs have the the little flip up lube port.
10spd cassette.
It's got a Superbe stem, but I was told that was NOT original.
The downtube friction shifters have been changed to indexed Shimano, not much help there.
I think the only other original part is the brake cable housing (no joke) which says Bianchi on it. Previous owner said he specifically got Shimano SLR replacement brake levers and hoods to accomodate the free brake cables which he thought gave it that "classic look"
https://i162.photobucket.com/albums/t...t/IMG_0507.jpg
https://i162.photobucket.com/albums/t...t/IMG_0515.jpg
https://i162.photobucket.com/albums/t...t/IMG_0513.jpg
https://i162.photobucket.com/albums/t...t/IMG_0518.jpg
Any ideas out there?
https://i162.photobucket.com/albums/t...IMG_0506-1.jpg
Serial number on the BB is: 69 18 10
Upper tube frame decal says "Tre tubi Rinforzati" Formula Two Produzione Columbus.
The fork decals say "Foderi Forcella Bianchi Formula Columbus"
The wheelset is original "Ambrosio 19 Extra Elite Durex", made in Italy. The hubs have the the little flip up lube port.
10spd cassette.
It's got a Superbe stem, but I was told that was NOT original.
The downtube friction shifters have been changed to indexed Shimano, not much help there.
I think the only other original part is the brake cable housing (no joke) which says Bianchi on it. Previous owner said he specifically got Shimano SLR replacement brake levers and hoods to accomodate the free brake cables which he thought gave it that "classic look"
https://i162.photobucket.com/albums/t...t/IMG_0507.jpg
https://i162.photobucket.com/albums/t...t/IMG_0515.jpg
https://i162.photobucket.com/albums/t...t/IMG_0513.jpg
https://i162.photobucket.com/albums/t...t/IMG_0518.jpg
Any ideas out there?
Last edited by Sivart; 03-03-07 at 03:31 PM.
#2
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,759
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times
in
14 Posts
80s
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
#3
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by cyclotoine
80s
#4
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,759
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times
in
14 Posts
We'll need pics, I don't know that much about Bianchis but there are people on this forum who do.
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
#5
crotchety young dude
Join Date: Jan 2005
Location: SF, CA
Posts: 4,818
Bikes: IRO Angus; Casati Gold Line; Redline 925; '72 Schwinn Olympic Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Serial number will help with the exact year.
#6
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Serial number is in my original post.
#7
crotchety young dude
Join Date: Jan 2005
Location: SF, CA
Posts: 4,818
Bikes: IRO Angus; Casati Gold Line; Redline 925; '72 Schwinn Olympic Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
D'oh.
#8
Senior Member
Join Date: Sep 2005
Location: Hervey Bay, Qld, Australia.
Posts: 2,928
Bikes: Colnago (82, 85, 89, 90, 91, 96, 03), 85 Cinelli, 90 Rossin, 83 Alan, 82 Bianchi, 78 Fountain, 2 x Pinarello, Malvern Star (37), Hillman (70's), 80's Beretto Lo-Pro Track, 80's Kenevans Lo-Pro, Columbus Max (95), DeGrandi (80's) Track.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 198 Times
in
124 Posts
Have a look at this Japanese website: https://members.jcom.home.ne.jp/my_bianchi/index.html (there is an underline _ between my and bianchi) and click on "Catalogs of Bianchi" then click on "1990" and you will see a BRAVA model.
Its not a very good image but it is listed there. I think your deep red colour is original even though the catalogue only presents the various models in Celeste. Have a look at the previous catalogue and you will see a similar coloured bike.
This doesn't mean your frame is 1990 but it's a starting point.
Its not a very good image but it is listed there. I think your deep red colour is original even though the catalogue only presents the various models in Celeste. Have a look at the previous catalogue and you will see a similar coloured bike.
This doesn't mean your frame is 1990 but it's a starting point.
#9
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I had come across that site and you're right, the images aren't very good. It was my understanding (and I could certainly be wrong) that there was a difference between the Japanese and Italian made bikes (componets, etc). Thanks for the lead though, I'll keep looking. Anyone else know of any catalog scans on the net?
#10
Senior Member
Join Date: Sep 2005
Location: Hervey Bay, Qld, Australia.
Posts: 2,928
Bikes: Colnago (82, 85, 89, 90, 91, 96, 03), 85 Cinelli, 90 Rossin, 83 Alan, 82 Bianchi, 78 Fountain, 2 x Pinarello, Malvern Star (37), Hillman (70's), 80's Beretto Lo-Pro Track, 80's Kenevans Lo-Pro, Columbus Max (95), DeGrandi (80's) Track.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 198 Times
in
124 Posts
I have always believed that the Italian frames had a 70mm wide - Italian - bottom bracket where the Japanese frames used a 68mm, British BB. I am more familiar with the 'Piaggio' era from around 1980 to 85. I would expect to see Campy. components on an Italian frame of that era. Frames of that era seemed to have an I.D. system that is starting to make sense - we are confident we can date these frames. Your frame has a 'different' I.D. number and its location is different. The Piaggio era frames had the serial number and date stamped on the seat cluster. I know other readers of this forum may be able to make sense of your bike's serial number.
Your frame has a 'correct looking' Made in Italy decal in a position I would expect to see this decal. Do you feel the frame is in its original condition?
I believe the 2 sets of biddon mounts (down tube and seat tube) and pump peg on head tube were mid to late 80's improvements in frame design.
By 1990 and with Moser leading the way using Shimano, I wouldn't be surprised to see Shimano on an Italian frame. That being said, you cannot confirm the original components anyway.
Best of luck in your quest - I can understand your 'need to know'.
Your frame has a 'correct looking' Made in Italy decal in a position I would expect to see this decal. Do you feel the frame is in its original condition?
I believe the 2 sets of biddon mounts (down tube and seat tube) and pump peg on head tube were mid to late 80's improvements in frame design.
By 1990 and with Moser leading the way using Shimano, I wouldn't be surprised to see Shimano on an Italian frame. That being said, you cannot confirm the original components anyway.
Best of luck in your quest - I can understand your 'need to know'.
Last edited by Gary Fountain; 03-04-07 at 02:08 AM.
#11
Senior Member
Join Date: Jan 2006
Location: Hills of Iowa
Posts: 1,248
Bikes: all diamond frames
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
For what it's worth, I have a late 80's? (original owner said he purchased it in 90) that was built up by a local shop. It is an Ishiwata double butted chrome-moly frame. No idea on original components, but the original owner told me he bought it as a bare frameset and had it built up as a tri bike.
As I got it.
Redone to road bike
frame decal
As I got it.
Redone to road bike
frame decal
#12
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Gary Fountain
I have always believed that the Italian frames had a 70mm wide - Italian - bottom bracket where the Japanese frames used a 68mm, British BB. I am more familiar with the 'Piaggio' era from around 1980 to 85. I would expect to see Campy. components on an Italian frame of that era. Frames of that era seemed to have an I.D. system that is starting to make sense - we are confident we can date these frames. Your frame has a 'different' I.D. number and its location is different. The Piaggio era frames had the serial number and date stamped on the seat cluster. I know other readers of this forum may be able to make sense of your bike's serial number.
Your frame has a 'correct looking' Made in Italy decal in a position I would expect to see this decal. Do you feel the frame is in its original condition?
I believe the 2 sets of biddon mounts (down tube and seat tube) and pump peg on head tube were mid to late 80's improvements in frame design.
By 1990 and with Moser leading the way using Shimano, I wouldn't be surprised to see Shimano on an Italian frame. That being said, you cannot confirm the original components anyway.
Best of luck in your quest - I can understand your 'need to know'.
Your frame has a 'correct looking' Made in Italy decal in a position I would expect to see this decal. Do you feel the frame is in its original condition?
I believe the 2 sets of biddon mounts (down tube and seat tube) and pump peg on head tube were mid to late 80's improvements in frame design.
By 1990 and with Moser leading the way using Shimano, I wouldn't be surprised to see Shimano on an Italian frame. That being said, you cannot confirm the original components anyway.
Best of luck in your quest - I can understand your 'need to know'.
The wheelset is original and my friend at my lbs thought the hubs were campy (they have the flip up oil port). Only thing is the bike now has a Shimano 600 rear derailer. Not sure on the cassette. Would these be compatible?
https://i162.photobucket.com/albums/t...t/IMG_0521.jpg
Is this the "pump peg" you mentioned?
Here's a few more pics. You can see "hi" is stamped on the bottom bracket near the S/N.
https://i162.photobucket.com/albums/t...t/IMG_0526.jpg
The cranks appear to be original, not sure about the chain rings.
https://i162.photobucket.com/albums/t...t/IMG_0524.jpg
Big thanks to everyone!
#13
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,579
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1442 Post(s)
Liked 1,059 Times
in
784 Posts
Check out the Giro from 1985, looks pretty close...maybe the Brava name came along the next year or 2...
https://bulgier.net/pics/bike/Catalogs/Bianchi-86/4.jpg
https://bulgier.net/pics/bike/Catalogs/Bianchi-86/4.jpg
#14
Senior Member
Join Date: Sep 2005
Location: Hervey Bay, Qld, Australia.
Posts: 2,928
Bikes: Colnago (82, 85, 89, 90, 91, 96, 03), 85 Cinelli, 90 Rossin, 83 Alan, 82 Bianchi, 78 Fountain, 2 x Pinarello, Malvern Star (37), Hillman (70's), 80's Beretto Lo-Pro Track, 80's Kenevans Lo-Pro, Columbus Max (95), DeGrandi (80's) Track.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 198 Times
in
124 Posts
Older Campy hubs didn't have a flip-up oil port. The Record hubs had a "C" clip that covered an oil hole in the middle of the hub barrel. Other Campy hubs didn't have an oiler hole in the middle of the hub barrel.
I think the Shimano rear derailleur would virtually work with any 6 or 7 speed freewheel (from your photo's, yours looks like a 6 speed) as long as friction levers were used. If you have an indexing lever and it works with your derailleur/freewheel setup, all the better.
Yeah, that's the pump peg that allows the pump to be carried under the top tube in a horizontal position. I usually use a strip of velcro around the tube and pump as a safety measure; so the pump doesn't come loose on bumpy roads.
I bet the "hi" in the final 2 letters in the word "Bianchi".
The cranks look to be "Ofmega". I believe that they were fitted to 'lesser' Bianchi bikes. I think they are original and are quite nice on your bike (I would be pleased to see them on my frame). I'm not sure if the rings are original but they do look good.
Thanks for the opportunity to look at your bike - I would like it in my garage.
I think the Shimano rear derailleur would virtually work with any 6 or 7 speed freewheel (from your photo's, yours looks like a 6 speed) as long as friction levers were used. If you have an indexing lever and it works with your derailleur/freewheel setup, all the better.
Yeah, that's the pump peg that allows the pump to be carried under the top tube in a horizontal position. I usually use a strip of velcro around the tube and pump as a safety measure; so the pump doesn't come loose on bumpy roads.
I bet the "hi" in the final 2 letters in the word "Bianchi".
The cranks look to be "Ofmega". I believe that they were fitted to 'lesser' Bianchi bikes. I think they are original and are quite nice on your bike (I would be pleased to see them on my frame). I'm not sure if the rings are original but they do look good.
Thanks for the opportunity to look at your bike - I would like it in my garage.
#15
Newbie
Thread Starter
Join Date: Mar 2007
Location: Chicago
Posts: 17
Bikes: 85 Ochsner, 85 Schwinn Super Sport, 87 Schwinn Super Sport, 92 Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is this the type of "C" clip that you mentioned?
https://i162.photobucket.com/albums/t...t/IMG_0535.jpg
I also noticed that the quick release levers say "Ofmega" on them as well. Anyone now about this level component group/year?
https://i162.photobucket.com/albums/t...t/IMG_0538.jpg
Gary (and everyone else), thank you for taking the time to try and help me out. I was more interested in finding out what year this is from but now I'm thinking I got a really sweet deal on this bike from reading up on the components that have been upgraded (and ironically are more making it more difficult to identify).
Brand new Ultegra brakes
Shimano SLR brake levers.
Superbe stem.
Shimano indexed downtube shifters.
Dura Ace headset.
Dura Ace FD.
Shimano 600 RD.
New Continental tires.
Aireon titanium saddle.
https://i162.photobucket.com/albums/t...t/IMG_0535.jpg
I also noticed that the quick release levers say "Ofmega" on them as well. Anyone now about this level component group/year?
https://i162.photobucket.com/albums/t...t/IMG_0538.jpg
Gary (and everyone else), thank you for taking the time to try and help me out. I was more interested in finding out what year this is from but now I'm thinking I got a really sweet deal on this bike from reading up on the components that have been upgraded (and ironically are more making it more difficult to identify).
Brand new Ultegra brakes
Shimano SLR brake levers.
Superbe stem.
Shimano indexed downtube shifters.
Dura Ace headset.
Dura Ace FD.
Shimano 600 RD.
New Continental tires.
Aireon titanium saddle.
Last edited by Sivart; 04-07-10 at 07:48 AM. Reason: privacy
#16
Senior Member
Join Date: Sep 2005
Location: Hervey Bay, Qld, Australia.
Posts: 2,928
Bikes: Colnago (82, 85, 89, 90, 91, 96, 03), 85 Cinelli, 90 Rossin, 83 Alan, 82 Bianchi, 78 Fountain, 2 x Pinarello, Malvern Star (37), Hillman (70's), 80's Beretto Lo-Pro Track, 80's Kenevans Lo-Pro, Columbus Max (95), DeGrandi (80's) Track.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 198 Times
in
124 Posts
Yes to 'C' clip - It probably has a correct name.
I don't know much about Ofmega components but I have a feeling they are the poor cousins of Campagnolo yet good quality.
I hoped someone could have zeroed-in on the build date of the frame to.
I think you did get a good deal as well.
I don't know much about Ofmega components but I have a feeling they are the poor cousins of Campagnolo yet good quality.
I hoped someone could have zeroed-in on the build date of the frame to.
I think you did get a good deal as well.
#17
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
Hi Sivart,
Nice bike! It looks like a newer variant of mine, which also has a tre tubi renforzati (double-butted main triangle) frame and Ofmega crankset and hubset. This would make it mid-grade, just below the Reparto Course full Columbus frames with their full Columbus tubesets. I'll be those chainrings are original; I bought a set of Bianchi-labeled Ofmega cranks on eBay, complete with black anodized chainrings.
The lead "6" in the s/n MAY indicate 1986; we're still trying to sort that out.
Nice bike! It looks like a newer variant of mine, which also has a tre tubi renforzati (double-butted main triangle) frame and Ofmega crankset and hubset. This would make it mid-grade, just below the Reparto Course full Columbus frames with their full Columbus tubesets. I'll be those chainrings are original; I bought a set of Bianchi-labeled Ofmega cranks on eBay, complete with black anodized chainrings.
The lead "6" in the s/n MAY indicate 1986; we're still trying to sort that out.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069