Retro roadies- old frames with STI's or Ergos
#4426
Newbie
Join Date: Nov 2014
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#4427
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
Tommaso, probably 1985-1986, SLX tubing.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
Last edited by RobbieTunes; 02-22-15 at 11:09 AM.
#4428
Senior Member
nice job on the Tommaso. very clean with just the right amount of nasty. it is nice to see them saved and brought back to life.
#4429
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 14,491
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 254 Times
in
141 Posts
I
Nice save.
Should be a fun bike for a new owner.
Tommaso, probably 1985-1986, SLX tubing.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
Should be a fun bike for a new owner.
#4430
Senior Member
Join Date: Oct 2008
Location: Frankfurt, Germany
Posts: 1,544
Bikes: Focus trash find commuter, Eddy Merckx Corsa, BP Stealth TT bike, Leader 720 TT bike, Boardman Comp Hybrid drop bar conversion, Quantec CX budget cyclocross build, SerottaNOS frameset ready to build up!
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 103 Times
in
69 Posts
Did 9-speed Ultegra have concealed shift cables? News to me...!!
beautiful build Robbie.
beautiful build Robbie.
#4432
Senior Member
Join Date: Apr 2013
Location: SoCal
Posts: 6,496
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 276 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
Tommaso, probably 1985-1986, SLX tubing.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
Saved from the garbage in poor condition, rough paint and decals, mix of Shimano and Campagnolo components.
My friend Kirk decided to save it; it was offered to him as an alternative to the landfill.
Decals are pending. Man, it is smooth. 5700 STI's, 9-sp Ultegra, some FSA in there, too.
Handbuilt wheels on 9-sp Ultegra hubs.
#4433
Senior Member
#4434
Senior Member
Join Date: May 2013
Location: Brea, CA
Posts: 68
Bikes: 2010 Cannondale CAAD 9.5; 1987 Centurion Ironman Retro Roadie (5800); 1985 Centurion Cinelli Project Retro Roadie (6700)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It took me a few months and 1 exploded rear derailleur, but I was finally able to get this beauty out for a ride today. Early Centurion Ironman frame I picked up from rccardr here on the forums. Built with full Shimano 5800 silver groupset. Wheels are Mavic Open Pro 36 hole with 5800 hubs. Rides like an absolute dream. Didn't expect a major difference in the 5800 from 5700 that I have on my CAAD 9, but truly a much better group. Front shifting is quiet, quick, and precise. Just be careful to use a good chain tool as a small chain issue can lead to an exploded rear mech, bent spokes, and bent/dented seat stay/hanger. All back straight and happy now.
[IMG][/IMG]
[IMG][/IMG]
#4435
Senior Member
Join Date: Oct 2008
Location: Frankfurt, Germany
Posts: 1,544
Bikes: Focus trash find commuter, Eddy Merckx Corsa, BP Stealth TT bike, Leader 720 TT bike, Boardman Comp Hybrid drop bar conversion, Quantec CX budget cyclocross build, SerottaNOS frameset ready to build up!
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 103 Times
in
69 Posts
They didn't, they're 105 5700 10 speed shifters.
#4436
Senior Member
Join Date: Oct 2008
Location: Frankfurt, Germany
Posts: 1,544
Bikes: Focus trash find commuter, Eddy Merckx Corsa, BP Stealth TT bike, Leader 720 TT bike, Boardman Comp Hybrid drop bar conversion, Quantec CX budget cyclocross build, SerottaNOS frameset ready to build up!
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 103 Times
in
69 Posts
Looks like a Cinelli Frog to me. 26.0mm clamp diameter.
There is only one quill stem available for oversized bars, AFAIK. It's made by Origin8, I have one on my commuter, it's perfectly serviceable but perfectly ugly. It has something like a 30 deg positive rise so is most likely unsuitable for a vintage road bike.
There is only one quill stem available for oversized bars, AFAIK. It's made by Origin8, I have one on my commuter, it's perfectly serviceable but perfectly ugly. It has something like a 30 deg positive rise so is most likely unsuitable for a vintage road bike.
#4437
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,724
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,401 Times
in
1,203 Posts
That Ironman really turned out nice. So many stories behind getting that frame back on the road...
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4439
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
Looks like a Cinelli Frog to me. 26.0mm clamp diameter.
There is only one quill stem available for oversized bars, AFAIK. It's made by Origin8, I have one on my commuter, it's perfectly serviceable but perfectly ugly. It has something like a 30 deg positive rise so is most likely unsuitable for a vintage road bike.
There is only one quill stem available for oversized bars, AFAIK. It's made by Origin8, I have one on my commuter, it's perfectly serviceable but perfectly ugly. It has something like a 30 deg positive rise so is most likely unsuitable for a vintage road bike.
This Frog was put on CL for a while, and got tons of interest, but everyone wanted it for next to nothing. Once he decided on the Origin8 bars in black, the black Cinelli quill/64-42 combo went out the window, especially as he rides the hoods.
#4440
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
It took me a few months and 1 exploded rear derailleur, but I was finally able to get this beauty out for a ride today. Early Centurion Ironman frame I picked up from rccardr here on the forums. Built with full Shimano 5800 silver groupset. Wheels are Mavic Open Pro 36 hole with 5800 hubs. Rides like an absolute dream. Didn't expect a major difference in the 5800 from 5700 that I have on my CAAD 9, but truly a much better group. Front shifting is quiet, quick, and precise. Just be careful to use a good chain tool as a small chain issue can lead to an exploded rear mech, bent spokes, and bent/dented seat stay/hanger. All back straight and happy now.
[IMG][/IMG]
[IMG][/IMG]
#4441
Junior Member
Join Date: Nov 2013
Location: Bedford, NH
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
80's Specialized Allez
Newest build. An 80's Allez Frame. Resprayed and new decals.
Dura Ace 7700 crank and bottom bracket, 105 derailleurs, older single pivot Shimano 600 brakes.
[/URL]
Dura Ace 7700 crank and bottom bracket, 105 derailleurs, older single pivot Shimano 600 brakes.
[/URL]
#4443
Senior Member
Join Date: Jan 2011
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi Guys,
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
I wouldn't mind hunting for used components, so how new can I go?
1) At the minimum, I'd like to do new rims/wheels. Now given the Dura Ace 6-speed, I understand this is a limitation, so I may need to keep my rear hub if at least for now?
2) If I upgrade the group to a more modern groupset, then this may open up my hub options/wheel options?
3) If I upgrade the group, how new should I go? I understand there's limitations with spacing and such.
First a pic my Rossin:
Pelizzoli inspiration (this is pretty close to ideal!)
Specialized 40th Allez inspiration, very modern but still well done!
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
I wouldn't mind hunting for used components, so how new can I go?
1) At the minimum, I'd like to do new rims/wheels. Now given the Dura Ace 6-speed, I understand this is a limitation, so I may need to keep my rear hub if at least for now?
2) If I upgrade the group to a more modern groupset, then this may open up my hub options/wheel options?
3) If I upgrade the group, how new should I go? I understand there's limitations with spacing and such.
First a pic my Rossin:
Pelizzoli inspiration (this is pretty close to ideal!)
Specialized 40th Allez inspiration, very modern but still well done!
#4444
Senior Member
Join Date: Jul 2014
Posts: 77
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi Guys,
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
I wouldn't mind hunting for used components, so how new can I go?
1) At the minimum, I'd like to do new rims/wheels. Now given the Dura Ace 6-speed, I understand this is a limitation, so I may need to keep my rear hub if at least for now?
2) If I upgrade the group to a more modern groupset, then this may open up my hub options/wheel options?
3) If I upgrade the group, how new should I go? I understand there's limitations with spacing and such.
[...]
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
I wouldn't mind hunting for used components, so how new can I go?
1) At the minimum, I'd like to do new rims/wheels. Now given the Dura Ace 6-speed, I understand this is a limitation, so I may need to keep my rear hub if at least for now?
2) If I upgrade the group to a more modern groupset, then this may open up my hub options/wheel options?
3) If I upgrade the group, how new should I go? I understand there's limitations with spacing and such.
[...]
If you are about to get a new wheelset+group, I would rather recommend you get a steel frame from ebay or whatever, and build that from ground up. The new frame will be the smallest of your investments . For steel frames, building one with modern components is quite easy. Most classics will be spaced 126mm in the rear, and modern road hubs are 130mm. Because it's steel, however, the chainstays can be bent outward no problem ("cold setting"). This can be done permanently, but this is optional in most cases. Typically, 130mm hubs will go in 126mm frames quite easily without modification.
#4445
Senior Member
Join Date: Jan 2011
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Unfortunately the photograph is kind. The paint is not original, it has been repainted once already (at least). Also the current paint job is not in great condition, it could definitely use a repaint, which will get done regardless. The rims aren't in the best shape either and look to be their age, mavic GL330 with oooold tubulars. It definitely could use some love.
#4446
keep it simple.
Join Date: Jul 2005
Location: Washington, DC
Posts: 117
Bikes: Univega Superstrada modern build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That being said, the frame very well could be the least of your costs if you want to do modern wheels and components as well.
As the person above said, the main issue is rear spacing. Your frame is 126mm. Modern road hubs (8/9/10/11 speed) are 130mm. 'Coldsetting' shouldn't be a problem
Now, what SHOULD you do... Ah, the fun part My personal opinion: an expensive repaint would be throwing good money after bad here. If the DA stuff is in decent condition, you could take that off and sell it, seems to be an OK market for that. The no-brainer group to 'modernize' from the frame up is the 11speed 105 5800, IMO. Incredible value at under $400 for a new group online. Got you covered in black also:
Throw in some reasonably priced pre-built Shimano or Mavic wheels and you're good to go. If you have limited money to spend, I'd prioritize wheels and components ahead of a paint job any day, but that's just me!
Cheers.
#4447
keep it simple.
Join Date: Jul 2005
Location: Washington, DC
Posts: 117
Bikes: Univega Superstrada modern build
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Don't believe I've posted this here yet...
'87 Trek 330 Elance Frameset, 10 speed Shimano shifting, hub dynamo + lights. Doing serious winter commuter duty at the moment, taking whatever I can throw at it with aplomb. Dynamo lighting is the best thing since sliced bread for being to get on and just ride, regardless of the time of day-- some details of that build here.
Another shot, dreaming of warmer days...
'87 Trek 330 Elance Frameset, 10 speed Shimano shifting, hub dynamo + lights. Doing serious winter commuter duty at the moment, taking whatever I can throw at it with aplomb. Dynamo lighting is the best thing since sliced bread for being to get on and just ride, regardless of the time of day-- some details of that build here.
Another shot, dreaming of warmer days...
#4449
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
Hi Guys,
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
First a pic my Rossin:
I've never 'built up' a bike before, so if you all could lend me some advice, that'd be great!
I have this Rossin frame... it's got old 6-speed Dura ace. And some newer shimano brakes, DA seat post I believe, and DA quill stem. The bike is nice, however I feel like updating it... making it lighter, a bit faster, snappier, tighter, and freshening up the look. I plan to take apart the bike to get it repainted (colors not decided yet, but Pelizolli scheme is an option as I like red/white). I'm not a purist, so doing newer components would actually be ok by me, I actually like the stealth black components, chain rings etc. as it makes the frame stand out...
First a pic my Rossin:
On the frame, I like the two-tone just fine. Powder coating is cheaper and more durable, but can tend to blur the lugs if the color doesn't cover well. I'll leave you to your own devices on that subject, because it's about budget, the ability of the coater, etc. If I had to do it here in NC, I'd go with the new ceramic coatings, if possible. They cover well, are thin, and durable. Cold-setting would be OK but is not necessary on steel. More than likely, you can get a wider, 130mm rear wheel to go in there with just a bit of pulling on the stays while installing/removing the back wheel. Has always worked for me; should for you. Cold-setting is the best solution, but the process can be an issue. If you do it, do it before you paint or coat the frameset.
On the group, others are right: the rear wheel will dictate your progress. I have a couple of ideas...
1-Find a 7400 or 7700 rear hub that has an 8/9/10 freehub, matching spoke count, and lace it in. It's cheap, easy, and you will preserve a great looking and excellent quality hubset. You can easily sell the DA 7400 6-sp rear. In fact, I'd probably buy it. A 7400 would match the front, and the 8/9/10 freehub is not all that rare. Once that is accomplished, you can use just about any 8, 9, or 10-sp group, new or used, and still have "classic" wheels. Do this if you want to preserve classic wheels and rims, and polished hubs. You can then go ahead and sell the 6-sp group, as well, to offset the price of your next group. If you really want to save money, you can likely re-use that FD and calipers. 10/speed rings, a polished 105 5600 RD and polished 5700 STI's would only be needed to maintain the bling, modernize the ride, and remain with classic looks. Appears to be the cheapest, "maintain appearance" alternative.
2-Abandon the entire 6-sp DA group, and sell it. Then, decide how radically you want to depart from OEM and use the bikes on this thread for ideas, much as you did the other two bikes you showed us. You'll need new wheels and a group, and the price can range from, say, a set of Vuelta's on sale at Nashbar and an SRAM Apex group to a lot more for a lot more money. You can pick and choose from a Campagnolo group with Khamsins from the UK for around 600-650 delivered, to a couple of grand, to even more. I doubt you want to go that high.
3-What would I do? (love asking myself this question)
I'd only have two options: keep it as is, or go full Monty. Let's assume I'd go the full Monty, since this is the thread for it. This also takes advantage of the pretty nice prices available on the DA stem, seat post, headset, and other items.
Wheels come first. My current mantra is "used carbon tubulars." They are everywhere, and at some ridiculously low prices. Boom, first purchase. If they are Campagnolo-capable, they may be even cheaper, and the difference can be spent on a higher end Campagnolo group. If they are Shimano/SRAM-capable, just get the best price on the best wheels, and once they're purchased....accept them. Clinchers are out there. Used wheels are often excellent values, but make sure you see them in person, check the spokes, hubs, and very carefully, every inch of the rims.
After that, choose your headset, seat post, and stem/bar combination. Seriously, there are tons of groups, but you need to make these next. Stem/bars/seat post are part of the fit and cockpit, so get what you want. To duplicate that quill stem, you can go with a -17 degree stem, and based on the picture of your bike, it can be slammed right to the headset. I'd get a Ritchey black threaded 1" headset, use the same fork and steerer, and a black Deda quill adapter. This would match my FSA OS-190 seatpost, cut to minimize weight, and the Bontrager -17D RXL stem, 31.8 compact curve bars.
Now, the group. If I saved $300-$500 on the wheels by going with Campagnolo carbon used, I'd use that on a black Centaur group from ribble.uk or PBK, as long as I got the cables, housing, chain, etc. If my budget/savings allowed more, I'd go higher, and if less, then to black Veloce. If my wheels were Shimano/SRAM, it would depend on whether they'd accept an 11-sp cassette or not (like a modern Mavic, for example). 11-sp would be 5800, hands down, but I'd also look into SRAM's Rival. The 5800 is pretty nice stuff, I'm just not a fan of the crarnksets that much. It's a notch above Veloce, for sure, maybe Centaur, as well, for just plain being reliable, accurate, and smooth.
Pretty much depends on your goals here. Weight. Cost. Appearance. Performance. You may want to assign a priority level to each one.
Last edited by RobbieTunes; 02-28-15 at 10:40 AM.
#4450
Senior Member
Join Date: Jun 2012
Location: York, England after 15 years in Massachusetts
Posts: 600
Bikes: 1 frame and a heap of pieces
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
@RobbieTunes very well written up. @danilo my 2 cents is I use whatever I have, I have a Viscount built up with various parts, RSX shifters, 600 rear derailler, RX100 front derailler, tektro calipers, rolf wheels, original crank, generic seatpost and prologo saddle. This was originally built with a parts bin score a found a our local flea market for ridiculously short money, with the wheelset coming after as another lucky find in a thrift shop, the only part bought new, specifically for this was the brakes to facilitate to change from 27" to 700c wheels.
The Gitane recently done, was bought along with a crashed Trek 5200. I harvested the Trek for the Ultegra 6500 parts and went from there. I guess I am an opportunist builder than a planner.
All that said, your Rossin deserves better than that and should have a plan.
The Gitane recently done, was bought along with a crashed Trek 5200. I harvested the Trek for the Ultegra 6500 parts and went from there. I guess I am an opportunist builder than a planner.
All that said, your Rossin deserves better than that and should have a plan.
Last edited by rgver; 02-28-15 at 12:30 PM.