Mystery unusual English Lightweight needing ID. Pics!!
#1
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Mystery unusual English Lightweight needing ID. Pics!!
Just found this lovely mystery lightweight machine, probably late 60s.
No badges/decals to indicate make, but has good mid range components and in good working order.
Rode it for 10 miles or so yesterday to bring it home and it works perfectly.
Looks original and little used, and spec as I know it now is:
GB stem and Coureur calipers.
Ornate lugs!
5 speed with Atom flip flop hub.
Bayliss Wiley BB with oiler nipple.
Steel wheels, Huret derailer/changer.
Italia saddle.
Blumels lightweight guards and reflector.
Obviously from a small maker, probably Coventry made.
The triple triangle fame is quite distinctive.
(Did GT copy this??)
Cleaned up/lubricated a little from how it appears here and it rides very smoothly.
No badges/decals to indicate make, but has good mid range components and in good working order.
Rode it for 10 miles or so yesterday to bring it home and it works perfectly.
Looks original and little used, and spec as I know it now is:
GB stem and Coureur calipers.
Ornate lugs!
5 speed with Atom flip flop hub.
Bayliss Wiley BB with oiler nipple.
Steel wheels, Huret derailer/changer.
Italia saddle.
Blumels lightweight guards and reflector.
Obviously from a small maker, probably Coventry made.
The triple triangle fame is quite distinctive.
(Did GT copy this??)
Cleaned up/lubricated a little from how it appears here and it rides very smoothly.
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,746
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1380 Post(s)
Liked 1,279 Times
in
815 Posts
Late 1960s or late 1950s/early 1960s?
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#3
Senior Member
Join Date: Nov 2005
Posts: 5,770
Bikes: Cinelli, Paramount, Raleigh, Carlton, Zeus, Gemniani, Frejus, Legnano, Pinarello, Falcon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
That is very cool, 50s I'd say from the look of the lugs and the fork. The parts may be newer than the frame. There was a company that popularized that seatstay treatment, but I'm drawing a blank right now. I think Hetchins made them too.
#4
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1907 Post(s)
Liked 572 Times
in
338 Posts
The BB oiler suggests a date in the early 60's or earlier. The fact that the oiler is the same color as the frame suggests a rattle-can respray. You might consider wiping at it with some Goof-off, see if there's anything left of the original paint and decals.
What's the seatpost size? That may tell you something about the frame material.
What's the seatpost size? That may tell you something about the frame material.
#5
Senior Member
Join Date: Dec 2001
Location: n.w. superdrome
Posts: 17,688
Bikes: 1 trek, serotta, rih, de Reus, Pogliaghi and finally a Zieleman! and got a DeRosa
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
9 Posts
yup, hellenic seat stays. They were a very well known feature of
Hetchins frames, although not exclusive of them. I find 3 marques on
CR that show hellenic seatstays. Hetchins, Merlin (in Bob Jackson era) and
Thanet. The Thanet Silverlight had a strange offset bottom bracket so I don't think
that's it.
Most of the Hetchins I've seen had more elaborate lugs, and that is more elaborate than
the Italian style lugs.
By process of elimination I'd say probably a Merlin, 1960's at the latest.
Of course this is wild assed conjecture on my part, I do suggest you try to
get in touch with Hilary Stone about this one (he sometimes posts here but most often
hangs out at CR list.)
Marty
Hetchins frames, although not exclusive of them. I find 3 marques on
CR that show hellenic seatstays. Hetchins, Merlin (in Bob Jackson era) and
Thanet. The Thanet Silverlight had a strange offset bottom bracket so I don't think
that's it.
Most of the Hetchins I've seen had more elaborate lugs, and that is more elaborate than
the Italian style lugs.
By process of elimination I'd say probably a Merlin, 1960's at the latest.
Of course this is wild assed conjecture on my part, I do suggest you try to
get in touch with Hilary Stone about this one (he sometimes posts here but most often
hangs out at CR list.)
Marty
__________________
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
#6
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,930
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1408 Post(s)
Liked 1,025 Times
in
760 Posts
^Yes^ contact Hilary or Norris Lockley (also of the CR list), they should have some help for you. I hope that isn't a crack in the BB shell near the oiler! Let it be dirt...
#7
Junior Member
Join Date: Jan 2008
Location: Kingsville, TX
Posts: 20
Bikes: 2 Cannondales and a Motobecane frameset
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am showing my ignorance but what is the CR list? Thanks, George
#8
Bicycle Repair Man !!!
I haven't got a clue what it is but it is certainly, gorgeous.
Cr is Classic Rendezvous
Cr is Classic Rendezvous
#9
Senior Member
Join Date: Dec 2001
Location: n.w. superdrome
Posts: 17,688
Bikes: 1 trek, serotta, rih, de Reus, Pogliaghi and finally a Zieleman! and got a DeRosa
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
9 Posts
I was wondering why they were called hellenic seat stays then I stumbled across this
'Hellenic stays were introduced by (and named for) the British frame builder Fred Hellens in 1923'
on Sheldon Brown's web site (should have known the answer would be there).
marty
'Hellenic stays were introduced by (and named for) the British frame builder Fred Hellens in 1923'
on Sheldon Brown's web site (should have known the answer would be there).
marty
__________________
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
#11
Senior Member
Join Date: Aug 2006
Posts: 592
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
very nice indeed!! you have yourself a real find there, I would not think of parting with it if its your size. Sorry no new info, what i knew has already been brought up but good luck!
#12
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Thanks for all that guys.
I thought the best place to start was right here.
Bought it Saturday and only got it home late Tuesday, so not had time to do much research myself yet.
Got a few more specific details now I've had a closer look.
Seat-post is 27.2mm.
Atom hubs (Diana f/w) are inscribed 23 79 front and 08 79 rear. Might be dates?
Rigida Superchromix rims which are inscribed 37 + 79 in the diamond.
Looks like the wheels are 79 to me.
Probably replacements since the frame seems quite light without the steels.
Chain-set is Bayliss Wiley and stamped as here.
AX and AW seem to be date codes.
Headset is stamped Alatet.
New one on me!
Does look as if it has had a repaint at some point.
The seat stays are quite sophisticated being double tapered, thinner at either end.
Not seen that before.
Next step is to check Hilary Stone and maybe Classic Lightweights.
https://www.classiclightweights.co.uk/
Unfortunately the frame is a little small for me at 23" so it'll probably get passed on eventually.
I thought the best place to start was right here.
Bought it Saturday and only got it home late Tuesday, so not had time to do much research myself yet.
Got a few more specific details now I've had a closer look.
Seat-post is 27.2mm.
Atom hubs (Diana f/w) are inscribed 23 79 front and 08 79 rear. Might be dates?
Rigida Superchromix rims which are inscribed 37 + 79 in the diamond.
Looks like the wheels are 79 to me.
Probably replacements since the frame seems quite light without the steels.
Chain-set is Bayliss Wiley and stamped as here.
AX and AW seem to be date codes.
Headset is stamped Alatet.
New one on me!
Does look as if it has had a repaint at some point.
The seat stays are quite sophisticated being double tapered, thinner at either end.
Not seen that before.
Next step is to check Hilary Stone and maybe Classic Lightweights.
https://www.classiclightweights.co.uk/
Unfortunately the frame is a little small for me at 23" so it'll probably get passed on eventually.
#13
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
After ten minutes on the Classic Lightweights site I now believe it is a Pollard!
https://www.classiclightweights.co.uk...s/pollard.html
https://www.classiclightweights.co.uk...s/pollard.html
#15
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
How much you wanna put on it?
I would love it to be a Hetchins, but it ain't!
But it's probably rarer than a Hetchins...
I would love it to be a Hetchins, but it ain't!
But it's probably rarer than a Hetchins...
#18
Senior Member
Join Date: Jul 2007
Location: Lancaster County, PA
Posts: 5,060
Bikes: '39 Hobbs, '58 Marastoni, '73 Italian custom, '75 Wizard, '76 Wilier, '78 Tom Kellogg, '79 Colnago Super, '79 Sachs, '81 Masi Prestige, '82 Cuevas, '83 Picchio Special, '84 Murray-Serotta, '85 Trek 170, '89 Bianchi, '90 Bill Holland, '94 Grandis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
Alatet headsets are fairly common on British lightweights from that era; I have one that's going on my Flying Scot.
#19
Senior Member
Join Date: Jul 2007
Location: Lancaster County, PA
Posts: 5,060
Bikes: '39 Hobbs, '58 Marastoni, '73 Italian custom, '75 Wizard, '76 Wilier, '78 Tom Kellogg, '79 Colnago Super, '79 Sachs, '81 Masi Prestige, '82 Cuevas, '83 Picchio Special, '84 Murray-Serotta, '85 Trek 170, '89 Bianchi, '90 Bill Holland, '94 Grandis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
#20
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I was assuming, from the above pics, that it was a Bayliss Wiley chain-set.
If it is a Williams I stand corrected
The B W in the stamp led me to assume Bayliss Wiley obviously.
But this is how you learn and it's a newish area for me, so BF does the job again!!
If it is 1956/7 that fits in with the serial number which seem to run in series.
1898 was the last in 1990 and mine is 1596.
Adds up, and fits in with the Coureur brake set and mudguards!
The Alatet headset is free and smooth so I don't intend touching that.
Seems like I know the make and year 24 hours or so after posting the question here!
How good is that?
Thanks again.
P.S. Is your Flying Scot featured here on BF?
Be good to see it.
#22
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Just to finish this old thread with the right answers....
It is a Pollard, made in Coventry in the late 40s!!
A beautiful and rare machine.
See here the brother of the person I sold the frame to riding a similar Pollard hellenic in competition in the late 40s.
https://www.classiclightweights.co.uk...s/pollard.html
I sold the frame and forks to a certain Peter Brown for a very modest sum. (£75)
When he received it he complained that I had not included the brakes and stem etc. etc.
Not an amicable transaction.
But it taught me lessons which are well learnt now
IE Do your research. Do your research. Do your research.
Wiser now
Should've kept it though.....
It is a Pollard, made in Coventry in the late 40s!!
A beautiful and rare machine.
See here the brother of the person I sold the frame to riding a similar Pollard hellenic in competition in the late 40s.
https://www.classiclightweights.co.uk...s/pollard.html
I sold the frame and forks to a certain Peter Brown for a very modest sum. (£75)
When he received it he complained that I had not included the brakes and stem etc. etc.
Not an amicable transaction.
But it taught me lessons which are well learnt now
IE Do your research. Do your research. Do your research.
Wiser now
Should've kept it though.....
Likes For viscount:
#23
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Just looking through old posts and realise that this one didn't get finished properly.
I think it could do with a final picture.
Pretty much original except for Huret RD saddle and later Wiliams chainwheel.
Rear Blumels guard was being fixed when this photo was taken.
It is a lovely, distinctive, English lightweight made in Coventry by a relatively unknown, small maker.
It was found languishing in a shed less than a mile from where it was made.
(Even on the same road. Stoney Stanton Road, Coventry.)
Now being restored by its new owner and will probably lead a pampered life from now on.
Should never have sold it....
I think it could do with a final picture.
Pretty much original except for Huret RD saddle and later Wiliams chainwheel.
Rear Blumels guard was being fixed when this photo was taken.
It is a lovely, distinctive, English lightweight made in Coventry by a relatively unknown, small maker.
It was found languishing in a shed less than a mile from where it was made.
(Even on the same road. Stoney Stanton Road, Coventry.)
Now being restored by its new owner and will probably lead a pampered life from now on.
Should never have sold it....
Likes For viscount:
#24
Senior Member
Join Date: Jul 2007
Location: Lancaster County, PA
Posts: 5,060
Bikes: '39 Hobbs, '58 Marastoni, '73 Italian custom, '75 Wizard, '76 Wilier, '78 Tom Kellogg, '79 Colnago Super, '79 Sachs, '81 Masi Prestige, '82 Cuevas, '83 Picchio Special, '84 Murray-Serotta, '85 Trek 170, '89 Bianchi, '90 Bill Holland, '94 Grandis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
How bizarre: I was just looking at this one on ebay yesterday:
https://tinyurl.com/dk6htv
and reresearching the whole Hellenic stay thing (though this one currently listed doesn't have them. There's yet another one (frame) on ebay UK right now. Maybe one of them has your name on it.
https://tinyurl.com/dk6htv
and reresearching the whole Hellenic stay thing (though this one currently listed doesn't have them. There's yet another one (frame) on ebay UK right now. Maybe one of them has your name on it.
#25
Viscount
Thread Starter
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
That is a loooong shot!? And quite bizarre as you say.
These machines are ultra rare here in UK so how that one got over there is another story.
Doesn't look too expensive at $750 though.
Track frame too, admittedly a late one.
Still hens teeth stuff though.
The one on ebay looks a bit of a mess IMO.
The extra rear struts make it look as if the the rear triangle wasn't up to it in the first place.
The Hellenic version is the one to have.
I've only ever had, or even seen, two Pollards.
The other is here:
https://flickr.com/photos/bikesruz/
These machines are ultra rare here in UK so how that one got over there is another story.
Doesn't look too expensive at $750 though.
Track frame too, admittedly a late one.
Still hens teeth stuff though.
The one on ebay looks a bit of a mess IMO.
The extra rear struts make it look as if the the rear triangle wasn't up to it in the first place.
The Hellenic version is the one to have.
I've only ever had, or even seen, two Pollards.
The other is here:
https://flickr.com/photos/bikesruz/