Robbie, will this fit? Thanks.

Have: Peugeot-branded Stronglight 99 crankset (the weird 86mm BCD one), 170mm.

Want: The same without "Peugeot" stamped on the crank arms. Chainrings are negotiable. It currently is 50-40-30. I want the 50, but plan on going half-step plus granny, so what do you have?

Cyclotoin, I have a 170 Sugino VT (Tpl currently set up as a Dbl) with 110 bcd, not sure if the taper is ISO or JIS. Non drive side arm does not quite match, so I guess it is a replacement. If interested, I can send pics

Probably, you may have to trim it a bit.

Pm(s) sent

Looking for north road bars. I have straight bars and drop bars to offer in exchange. Thanks.

Are steel ok Tom? I'll check my dungeon

Yes, Rob. Thanks.

Looking for Shimano 7 speed index shifters. 600/Ultegra 6400 DT shifters or Dura Ace 7401 DT shifters or 600/Ultegra SL-BS50 barcon shifters.

ISO: Campagnolo crank arm - Left side, Record type. 172.5 would be Ideal but 170 or 175 would tide me over. Condition not important. Cheers.

I am still looking. Can anyone help me with this? Thanks.

ISO: 700c rear cross wheel, It has to be a double walled, i had been running a 6 and 7 speed on it. But any speed will work. I need a wider rim as well. It is for use with some offroad riding. I had trashed the rear wheel on my 92 Bianchi Project bike. After 20 years the rim split and gave up. As you can see from the picture. I use it in mud for some and need something that can accomadate a 700 x 35 at least tire.
http://i1105.photobucket.com/albums/...ker/mail33.jpg

I have:
TwoFish bicycle pump block - New, i have 2 of these. they are wonderful for carrying a pump. rubber block between pump and frame, still compresses to fit in the frame but also secures with velcroe.
http://i1105.photobucket.com/albums/...iker/2fish.jpg

Toe Strap buttons...the protector of shoes from buckles. green set says 'made in italy, super sport' and the black set simply says 'made in italy'. Both NOS
http://i1105.photobucket.com/albums/...uahiker/bb.jpg

Cannondale Headshok boot, 50mm travel, pre 96 models. NOS and NIP.
http://i1105.photobucket.com/albums/...iker/cdale.jpg

Christophe toe clips, med or large.
http://i1105.photobucket.com/albums/...iker/chres.jpg

Christophe toe clips, Special, XL
http://i1105.photobucket.com/albums/...christsphe.jpg

NOS Dura Ace, centerpull brake set up. all the bits included, even the quick release hook ups.
http://i1105.photobucket.com/albums/...uahiker/da.jpg

DiaCompe used brake calipers...they are def used. but functional. brakes on one, other is bare,
http://i1105.photobucket.com/albums/...uahiker/dc.jpg

NOS Suntour Bottom bracket cable guide, and also pictured is NOS Alfa umbrella clamp, made in France.
http://i1105.photobucket.com/albums/...uahiker/st.jpg

Leather double buckle straps, i use these for securing bags, saddlebags, etc to the bike racks. they are wonderful looking, tough and secure multipurpose straps. I have 2 sets now with more to have in stock soon.
http://i1105.photobucket.com/albums/...therstraps.jpg

New Delta MegaRack ultra
http://i1105.photobucket.com/albums/...hiker/mail.jpg
http://i1105.photobucket.com/albums/...113_092453.jpg

Sulky road bike brake levers, drilled out. used. no hoods available.
http://i1105.photobucket.com/albums/...iker/sulky.jpg

NOS Zeus bottom bracket cable guides, and NOS Zeus pump umbrella clamp. i have 2 guides and 2 umbrella clamps.
http://i1105.photobucket.com/albums/...113_091754.jpg

Zefal HPx3 used frame pump. it has bumps, dents, scrapes, broken plastic area that secures it to frame on one side. it's not new or pristine. but it works fine. I used it until i got a Park frame pump this year.
http://i1105.photobucket.com/albums/...113_091342.jpg

Wald Woddy rear rack. This is new, it was mounted on a bike to use to display rear panniers that i sell.
http://i1105.photobucket.com/albums/...113_092432.jpg

Rear Panniers, these have no name on them. They are used but you could never ever tell except for some marks on the underside that show it was on a rack. Overall..they were mostly for display. probably have 2 demo rides of less than 3 miles total. i am getting new panniers for Christmas. Yay to my wife!
They have reflective stripe n them. top velcroe edge straps, top buckles, underside adjustable strap and hook.
http://i1105.photobucket.com/albums/...ahiker/4-1.jpg

If you're looking for anything else...don't hesitate to ask. Peace,
~W~

HAVE:
2 cases of Tressostar handlebar tape (box of ten) in BLACK
Typically (2) rolls per bike.
49cm Fuji Club (too small) (artic blue)..frame or complete..I'd prefer to get rid of the frame only..


NEED:
cable cutter..something of decent quality..
cone wrenches..
Nitto technomic deluxe..

WTB: Hi I'm a total newbie who is stung by the cycling bug bad ... I ride road and have two bikes a Nishiki circa 1980 and a 2011 Carbon Look. I love them both but I dream of a classic Italian steel frame that I could build up. I want to buy a Masi, Colnago, Cinelli or DeRosa in 56-57cm-ish size. Please email or PM me if you have and are willing to sell. - thanks

ISO:

Campagnolo Nuovo Record Headset adjustable cup
Campagnolo Nuovo Record Headset toothed washer (not too big a deal I can always use a generic one but the real thing would be nice)
Campagnolo Record rear hub axle for 126 OLD
Campagnolo Record rear hub cones
Campagnolo Record rear hub oil hole cover clip

Have:

Campagnolo bottom bracket cups and spindles and other complete BBs
Campagnolo record rear hub skewers curved
Campagnolo record QR pre CPSC nuts
Campagnolo record flat QR levers (not awesome shape)
Campagnolo gransport adjustable headset cup (english)
Campagnolo gransport steel rear derailleur (replacement pulleys)
Campagnolo Gransport headset fixed cup
1st generation canpagnolo headset crow race (yes the very old one with rounded bottom and tiny text. The race is tarnished and need s polish but very serviceable)
Small campagnolo derailleur parts like used front derailleur cages and some arms and pins and bolts and springs and stuff like that.
Part of a super record derailleur including ti lower pivot bolt
Campagnolo pump umbrella
Campagnolo front hub axles, cones, nuts, spacers
Campagnolo crank bolts
Campagnolo 10mm seatpost binder bolt (at least that is what it appears to be, I have never seen one before but it is NOS)

Basically I have lots of small parts and parts of components and want to trade some to make some of them whole again..

hope we can help each other out.

Also in lieu of the campagnolo rear hub parts I want I have to trade a 32hole rear hub shell with dustcaps and races but no oil hole clip but I do have a skewer and spare locknuts for it.
Also have a 32hole front hub complete with skewer.

Welcome to the forums Flatlandcanuck.

Per the forum rules, this is ISO and for trade only. WTB ads need to be in the sales forum with an upgraded membership. The mods do not look favorably on direct use of "money" words (= cash, sale, etc) in this thread.

Please edit your ad to say something like

Welcome to the forum. I've edited your post to conform. No selling/buying on this thread. Handle transactions in PM's or emails, and good luck.
Thanks, TimmyT

Oh.. also ISO.. lockring for record track hub.

Are they different than any other lock ring or are you just after a Campagnolo lock ring specifically?

they are 1.32" x 24 tpi. I would like campagnolo or compatible. Most others are 1.29" x 24 TPI. I got the hub in a trade and it has a BB lockring on it... not good 1.37" too much play, I would not ride with such a lock-ring. The pain is I sold the spare one I had years ago!

ISO: 70's suntour hubs. Trying to match to a bike with first gen cyclone derailleurs. Prefer high flange but not very picky.

Have: Various rebuilt Regina freewheels, shimano 600 tricolor brakes and levers, 105 clamp-on downtube shifters, more stuff I'll add later......

Feel free to make trade offers for stuff I have as well!!

Have: "Jim Blackburn" black ano bottle cage, used but in good+ shape
Want: same in silver, as in with the "Jim Blackburn" engraving

Also have a "Jim Blackburn" silver rear rack that measures 16 1/8" from mounting hole to mounting hole. I need one a little smaller, but I'll need to measure (15 1/4" maybe?) Save me from trying to modify it.

ISO Pivo death stem, matching handlebar and chrome steel seat post (assembly) for a 71 Gitane TDF. I also need the Ideal 80 saddle or the stock plastic one. I want the exact stem model. I have Cinelli stems or other stuff to trade.

http://farm9.staticflickr.com/8477/8...a9c5c8b6a2.jpg
29 714 by barnstormerbikes, on Flickr

http://farm8.staticflickr.com/7265/8...697111d073.jpg
29 707 by barnstormerbikes, on Flickr

^ That's just a flesh wound Why do you need another? :D

Frank, RHM might have one. Shoot him a pm