Bike Forums

Bike Forums (http://www.bikeforums.net/forum.php)
-   Classic & Vintage (http://www.bikeforums.net/classic-vintage/)
-   -   ISO and For Trade thread parts 2 and 3. (http://www.bikeforums.net/classic-vintage/489137-iso-trade-thread-parts-2-3-a.html)

crank_addict 02-05-14 05:02 PM

RHM and your dual pulley guide-
In the back of my memory have a vision of seeing a dual cable pulley guide in an old Cyclo or Benelux catalog. I've been searching for a specific chain tensioner and there's some pics posted of the catalog having the part and other items like the pulley. Disraeligear site or was this something Sheldon Brown did for his own, way back time machine?? One could have purchased a rd kit for IGH. RD shifter cable could parallel run with the IGH cable. Might have been just a longer screw, spacer and the two individual pulleys.

BTW: Still searching for a vintage chain tensioner. My previous post have some trade items. Have other stuff and please inquire. Thanks

3speedslow 02-05-14 05:53 PM

Quote:

Originally Posted by rhm (Post 16470937)
Was someone looking for a Sun Tour dork disk? If so, please make contact, I find one on my cellar.

Yes, it's me. Have one, would like another. Sent you a PM

osteoclast 02-05-14 06:01 PM

Have a NOS Spidel Stronglight 172.5 left crank.....looking for a 170 for my 105 chainset.

Narhay 02-05-14 10:18 PM

Quote:

Originally Posted by JohnDThompson (Post 16469796)
Cottered bottom bracket spindles vary somewhat in diameter and length depending on manufacturer. If you have a Raleigh bottom bracket, it's safest to go for a Raleigh crank, unless you have the opportunity to test the fit before you commit.

After searching around I found one Raleigh crankset in the UK that was what I was looking for...but upon closer inspection had quite a bit of shallow pitting. For $80 CDN I wasn't all that happy with the condition.

I went with this one: http://www.ebay.ca/itm/BANKRUPT-VINT...fa42333&_uhb=1

It looks just like the chainset used on some of the Raleigh 3 speed clones I've seen. I hope it will fit fine and if not...well it is NOS and half the price of other cottered single cranks available that were used.

Thanks Arex for the offer but I think the Thai crank will meet the round folder. What a POS.

bici_mania 02-05-14 11:31 PM

Quote:

Originally Posted by 3speedslow (Post 16471077)
Yes, it's me. Have one, would like another. Sent you a PM

I might have another in a few days. It can be yours for free if you want it too.

otg 02-06-14 02:55 AM

Quote:

Originally Posted by rhm (Post 16470937)
Was someone looking for a Sun Tour dork disk? If so, please make contact, I find one on my cellar.

I've got this one coming off when I get some time, it's yours if you want it. Just send a PM and I'll get it in the mail.
http://i482.photobucket.com/albums/r...y/DSCN0771.jpg

Sixty Fiver 02-06-14 03:24 AM

Quote:

Originally Posted by Narhay (Post 16468970)
ISO
Raleigh or other 3 speed single cottered crankset. I have the bottom bracket, just need crankset.
XT 7 speed thumb shifters or other XT 7 speed shifters

Have:
Magura hydraulic rear rim brakes, shimano light action front and rear derailleurs, XT 7/8 speed rear derailleur, rino 26.8 seat post, acera right flat bar 8 speed shifter, olive green NOS Raleigh Sports chain guard, a bunch of hubs...I have a box of parts. Let me know what you are looking for and if I don't have what you need perhaps we can come to some other arrangement.

I am sure I have a few spare Raleigh cranks that I'd send for the cost of shipping as they are a little weighty.

Chicago Al 02-06-14 04:42 PM

ISO small chainring (I think 36t is it) for TA *3-bolt* crankset.
I know this came as part of a 'triplizer' kit from TA with 3 long bolts and spacers (kit #83 '3 attaches'), but it could be mounted as the small ring on a double setup. Either could work for me. I'm trying to add a low gearing option to my Grand Record, this is one possibility. (There is one on eBay right now but $50 BIN seems steep.)

Have: lots of random stuff!

miamijim 02-06-14 05:22 PM

Quote:

Originally Posted by miamijim (Post 16462187)
2 different transactions....

1. ISO: Lower Campy Record headset cup

2. For Trade: I have a Huret Duopar RD I'm thinking of trading for a different long cage RD.

Let me know what you have....I have too many trade parts to list.


Still looking....

PedalTraveler 02-06-14 06:13 PM

Does anyone have a 165mm/ 6.5 inch left cottered crank arm? Just let me know and I'm sure I can come up with something to trade!

jimmuller 02-06-14 06:54 PM

Quote:

Originally Posted by PedalTraveler (Post 16474117)
Does anyone have a 165mm/ 6.5 inch left cottered crank arm? Just let me know and I'm sure I can come up with something to trade!

I have two complete cottered cranks, both left and right arms for each! Don't know the size but can probably find out within a day. One set, the nice Nervar that came on my UO8, I'd rather not split up. The other is a lesser crank than came on a Motobecane Nomade.

Are you in a rush?

kroozer 02-06-14 08:34 PM

Quote:

Originally Posted by Chicago Al (Post 16473887)
ISO small chainring (I think 36t is it) for TA *3-bolt* crankset.
I know this came as part of a 'triplizer' kit from TA with 3 long bolts and spacers (kit #83 '3 attaches'), but it could be mounted as the small ring on a double setup. Either could work for me. I'm trying to add a low gearing option to my Grand Record, this is one possibility. (There is one on eBay right now but $50 BIN seems steep.)

Have: lots of random stuff!

Somebody was selling 116mm bcd 3-pin alloy rings on Ebay and CR in December. I bought a 36t which was the most expensive at about $24 shipped, the 38t and 40t were much cheaper. They're not TA and he didn't know who made them, but they're good quality. His Ebay seller's name is ccdc.1 and maybe you could get in touch with him. I don't even have a TA crank yet, but with the 36t ring it's a much more attractive option.

PedalTraveler 02-06-14 09:03 PM

Quote:

Originally Posted by jimmuller (Post 16474206)
I have two complete cottered cranks, both left and right arms for each! Don't know the size but can probably find out within a day. One set, the nice Nervar that came on my UO8, I'd rather not split up. The other is a lesser crank than came on a Motobecane Nomade.

Are you in a rush?

No rush at all, and if you'd like to part with the lesser crank I would certainly be interested! Thank you

Chicago Al 02-06-14 09:10 PM

Quote:

Originally Posted by kroozer (Post 16474450)
Somebody was selling 116mm bcd 3-pin alloy rings on Ebay and CR in December. I bought a 36t which was the most expensive at about $24 shipped, the 38t and 40t were much cheaper. They're not TA and he didn't know who made them, but they're good quality. His Ebay seller's name is ccdc.1 and maybe you could get in touch with him. I don't even have a TA crank yet, but with the 36t ring it's a much more attractive option.

Thanks! I will follow up on that.

jimmuller 02-07-14 05:32 PM

Quote:

Originally Posted by PedalTraveler (Post 16474117)
Does anyone have a 165mm/ 6.5 inch left cottered crank arm?

The cotter-pin cranks I have are 170, not 165. I just measured them. Sorry.

clubman 02-07-14 06:23 PM

Quote:

Originally Posted by PedalTraveler (Post 16474117)
Does anyone have a 165mm/ 6.5 inch left cottered crank arm? Just let me know and I'm sure I can come up with something to trade!

Raleigh or otherwise? I find the Raleighs to be a tighter fit than say, Birmingham. There are lots of Raleigh made generic crank arms out there that just won't work on other British axles.

r0ckh0und 02-07-14 06:46 PM

Quote:

Originally Posted by clubman (Post 16477247)
Raleigh or otherwise? I find the Raleighs to be a tighter fit than say, Birmingham. There are lots of Raleigh made generic crank arms out there that just won't work on other British axles.

The one I'm planning to ship him is Sugino..............I may have others, if you want something different I'll need to check..................

PedalTraveler 02-08-14 07:52 AM

Quote:

Originally Posted by r0ckh0und (Post 16477298)
The one I'm planning to ship him is Sugino..............I may have others, if you want something different I'll need to check..................


I have a 1960 Hercules that I need the arm for, 1960 is the year Raleigh bought Hercules, but based on the dropouts and more Hercules-esque parts it's a pre-Raleigh bike so I think the Sugino arm should likely work just fine. Thanks! Good information to keep in mind though, I had thought they were all the same.

r0ckh0und 02-08-14 10:49 AM

Before I boxed it up....I tried it on a Carlton Raleigh and it fit fine...its headed your way

dweenk 02-09-14 07:29 AM

1 Attachment(s)
I am looking for a threaded top race for a 1" headset. The bearing cover on this Shimano is plastic and has become brittle and cracked. I'm surprised that Shimano actually made such a POS. The headset is OK except for this, so I'm trying to extend its life.
http://bikeforums.net/attachment.php...hmentid=363507

I assume the plastic cover was originally pressed on to the nut.

Never mind, I have located a replacement top race. I am good to go.

frantik 02-10-14 04:18 AM

ISO anodized purple and/or andodized blue 27.0 seat post ~350mm

clubman 02-10-14 10:16 AM

Quote:

Originally Posted by PedalTraveler (Post 16478134)
I have a 1960 Hercules that I need the arm for, 1960 is the year Raleigh bought Hercules, but based on the dropouts and more Hercules-esque parts it's a pre-Raleigh bike so I think the Sugino arm should likely work just fine. Thanks! Good information to keep in mind though, I had thought they were all the same.

If by chance it doesn't fit, I can probably find a non Raleigh arm for you as well.

seely 02-10-14 06:32 PM

ISO:

Shimano 600 DT shifters, not Tri Color
Quality Japanese 27.0 seat post (prefer a Sugino, Sakae, SR)
44-46cm bar of similar pedigree

HAVE:
NOS Mavic 571 36h hub
Sugino 170m 130 double, light use
Various bars, stems, posts
DiaCompe non aero drilled levers original gum hoods, light use
105 aero levers, blades rough but WHITE hoods in good used shape
Mismatched 105/600 DT shifters
Rough 105 Biopace double 172.5
Other Japanese odds and ends

shoota 02-10-14 10:31 PM

Does anyone have one of these recessed brake nuts in 30mm-35mm length?

http://s28.postimg.org/5eoywbtul/photo.jpg

retrofit 02-10-14 11:09 PM

PM'd you Shoota


All times are GMT -6. The time now is 03:07 AM.