Just roll with it
"Outside is free"
PM me. I have the stuff.
"Waiting for the crash"
The real beauty of this play, aside from the fact it was made by my favorite team, is that it was perfectly executed. The receiver ran a perfect route; Wilson threw a touchdown pass, and the defender played his part perfectly. A thing of beauty.
ISO: Suntour Sprint 9000 RD. A nice one.
Have: Suntour stuff inc. Cyclone, GPX, lots of others.
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
ISO front bearing cone for '74 Campy Record axle. Is that 26tpi, by any chance?
Real cyclists use toe clips.
Shimano BL-1055 Aero Hood Covers on my BL-6401 levers. The point at the top is slightly higher, so their is an empty space about the size of an M&M there, but it's not noticeable in use. If I ever have a reason to remove and reinstall them, I'll probably stick a wadded-up cotton ball in it.
Want to Trade:
I have a Soma Hwy 1 handlebar, silver, 26.0 clamp, 42cm wide. It actually measures 43cm c-c and it seems wiiiiiiide. Maybe it's the long top section with sharp bend. Anyway, I thought I'd like the wider bar but it's too much. It's in perfect condition, only two rides on it.
Looking for the same or similar short reach, shallow drop bar in 40cm c-c. Must be silver and 26.0 clamp.
PM if you have something, I don't always check this thread.
A pet peeve of mine is spending money on seatposts...
ISO-- 25.0 Seatpost for vintage french.
I need ONE for sure, but would be interested in TWO, if relatively similar since it's for a tandem. Don't need high end. I'm just hoping someone here parted out a couple of rusty old gitanes or something like that.
Have: a little bit of everything-- I am sure we could find a match.
PM if you have something and let me know what you might be looking for. Hopefully something would work out. Thanks!
Cinelli 66-42 in 26.0 or 26.4
Shimano 5500/5600 FD, 31.8 clamp (black preferred)
Centaur 10-sp clamp-on FD, silver, 31.8 with shims to 28.6
Centaur 10-sp braze-on FD, silver (2)
Centaur 10-sp (1st gen) polished calipers.
Centaur 10-sp square taper crank arms, no rings, 172.5
Veloce BB, English, 111mm (cartridge)
Cinelli 66-40 in 26.4 (2)
DiaCompe aero brake levers, silver w/gum hoods
Miche ?? calipers, w/pads, nice.
Tektro CR-5 aero brake levers, silver w/black hoods NIB
Bontrager SSR 6061 42cm 31.8 bar, unused.
3TTT silver alloy bar, 26.0/40cm, 250g double-groove (42cm and it would go nowhere)
Ritchey WCS ergo bend 44cm 31.8 no scratches.
Shimano 600EX pedals w/chrome toe clips
Matrix ISO II tubular wheelset, Shimano 6400 hubs (8/9/10 rear) 32-sp both
DA 7900 wheelset, black Velocity A23 rims, black DT Swiss spokes.
DA 7700 crankset, good condition, lettering on R arm half gone, L side all there.
Shimano 5500 BB (Octalink) Italian.
FSA SLK carbon seatpost 31.6/8, zero-setback, cut to about 230mm.
Full carbon Selle San Marco Aspide saddle w/Ti railes.
Selle San Marco Concor Light saddle black
Fizik Arione saddle, grey with white stripe
Fizik Pioggio saddle (padded) black
Campy-copy 27.2 seatpost (Chinese). If weight is not an issue.
Last edited by RobbieTunes; 02-26-14 at 05:32 PM.
..someday, there will be a day...
1984 Lotus Classique
1987 D'Arienzo (Basso) SLX
2004 Cinelli XLR8R2
2014 Wraith Hustle
2015 Wraith Paycheck (pending)
ISO: Rear axle wingnut pair to fit a Sturmey Archer IGH. I don't actually have a SA hub but a similar design. Quite sure the thread is Whitworth 13/32" - 20 tpi. Prefer steel and not a modified front wingnut having a drilled and tapped. Should have the indicator port.
To trade is an original Coloral water bottle cap and unknown make vintage stainless bottle. The Coloral cap is in great condition and still has 95% of the stopper cork intact and good. The bottle is dented up and has some scratches, sanitized and useable. The cork has a band around it to fit the incorrect bottle size opening. Good enough for the road an ideal for a 1950's ride. PM for more info or interest in something else you might need. Thanks!
coloral cap1.jpgcoloral cap2.jpgcoloral cap3.jpgcoloral cap4.jpgcoloral cap5.jpgcoloral cap6.jpgcoloral cap7.jpg
^ definitely looks like first run of Klean Kanteen Bottles. I have one (got it from Velo Orange quite a few years ago now) you can tell because they don't have the little squarish impression in the bottom like they do now.
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
I pulled 2 from the partsbin that match the levers you are looking for. One example has had the turkey wings removed, the newer one still have the nubs. Are you putting hoods on these ? Or are you running the turkey levers ? Cable stops will come with the levers.
Not looking for anything,PM me Congrats on finding some handlebars.
"Waiting for the crash"
ISO Universal Super 68 brake caliper, rear. I have an orphan front that needs a mate. I have center-pulls, Weinman and Dia Compe to trade.
The man who dies with the most toys…is dead. - Rootboy
ISO shimano 5500ca shifter left name plate, this one has the yellow 105 logo. Also 70's Record/super Record brake levers.
Have lots of stuff, ask,
1993 Bridgestone X0-3, 1980 apollo gran sport(fixed/SS), , 1987 (?) colnago spiral conic slx, 1988 Bianchi campione d'italia, 1985 (?) Giubilato FS, 1987 Marinoni Corsa track, , Cinelli Sentiero MTB., Miyata 1000 LT, Miyata sport 10 (now 12) mixte. 1987 Marinoni Special yellow, 1987 Marinoni Special blue and silver c-record, 2006 DE ROSA 'Merak'. 1977 Raleigh Super Course (in rebuild), 1982 Cinelli SC. , 1998 Cannondale R600 Cad 3, 1977 Holdsworth Pro, 1976 Holdsworth Sprint (track)
Still have the Shimano 8Speed bar end shifters (ultegra level, not dura-ace compatible) and some Shimano 600 hubs if anyone wants them.
Still looking for a 27.0mm and longish seatpost.