Bike Forums - ISO and For Trade thread parts 2 and 3.

Wow, sincere thank you for pointing that out. I got excited, but yeah, looks like a slightly newer one, not Raleigh made as the seller says, and seems to be from when, well... when yeah, Huffy made their own cheap bikes. Non lugged, not even cottered crank.

But honestly, thanks a ton for pointing it out. Much appreciate the kindness with the lead!

huffy man- Not sure what type or model seeking but this 1962 chrome 3 speed has been posted for a longtime on CL-Chicago for $225.
1962 Huffy Slideshow by billkski2 | Photobucket

yellowbarber

03-21-14 09:00 AM

ISO:
good quality, GC French (french, italian or spanish) threaded pedals, circa '75-'82ish

HAVE:
Raleigh/TI, Lyotard bsc threaded pedals, quill and rat-trap.
suntour superbe calipers, suntour superbe short cage rear der, shimano deore XT 'deerhead' long cage rear der

thanks
Tom, NYC

ilikebikes

03-21-14 04:30 PM

HAVE: I still have the Brooks Pro with copper rails and rivets, as new.
WANT: A trade for a Brooks B17 with copper rivets and rails, or a Brooks springer saddle, as long as its a mens saddle we can do this.

jeirvine

03-21-14 06:21 PM

Quote:

Originally Posted by yellowbarber (Post 16598131)

ISO: good quality, GC French (french, italian or spanish) threaded pedals, circa '75-'82ish
HAVE: Raleigh/TI, Lyotard bsc threaded pedals, quill and rat-trap.

I have some Lyotard Berthets and 460's in French thread. What Lyotard BSC's have you got?

yellowbarber

03-21-14 09:07 PM

Quote:

Originally Posted by jeirvine (Post 16599757)

I have some Lyotard Berthets and 460's in French thread. What Lyotard BSC's have you got?

I've got 2 pairs and some spares of Lyotard n°36
Already have some of those 460s, it's a quill type pedal I'm after...you know, like a Gipiemme sprint, Zeus NR copies, Atom 700, ect...

krtchp19

03-22-14 10:36 PM

http://i58.tinypic.com/ok36us.jpg http://i62.tinypic.com/5keqgg.jpg http://i62.tinypic.com/mm69t0.jpg http://i60.tinypic.com/123aypt.jpg

ISO: the dust cap for this pedal. Bicycle is a 70's Bridgestone Picnica. I have one but am missing the other. a point in the right direction is good too.

Have: lots of small bits and pieces, mud guards, mudguard stays, and gratitude.

3speedslow

03-25-14 07:49 AM

3 Attachment(s)

Here's what I have: Shimano A350 SIS 6 speed shifters. Good condition, came off a 90's Giant Kronos.

http://bikeforums.net/attachment.php...hmentid=370830 http://bikeforums.net/attachment.php...hmentid=370831 http://bikeforums.net/attachment.php...hmentid=370832

ISO: A Suntour 6/7 speed indexed set of shifters. Rather have silver not dark anodized. DRs are Sprint 9000 but don't expect that. Would need it to be for brazen on as well.

Thanks !

seely

03-25-14 07:47 PM

ISO:

Shimano GS or Exage series 175mm 110bcd cranks, w/ or w/o rings

Have:
Shimano 105/Sugino/Suntour cranks
Diacompe/Shimano non aero levers
Various bars/stems
Other things I'm forgetting at the moment

CO_Hoya

03-26-14 08:03 PM

Quote:

Originally Posted by ham (Post 16592026)

Want: 140mm (+-5) quill stem
Have: Normal sized stems

I've got a 3ttt stem in 130mm that looks like it would clean up nicely. Not exactly what you're looking for, I know.

Send me a PM if interested.

BluesDaddy

03-26-14 08:52 PM

Quote:

Originally Posted by seely (Post 16611490)

ISO:

Shimano GS or Exage series 175mm 110bcd cranks, w/ or w/o rings

I have a FC-M500 drive side with a closely matched Shimano non-drive side arm. No rings or bolts. Beater condition. Yours for the cost of postage.

Ex Pres

03-27-14 07:51 AM

My next needle in a haystack ISO:
Stronglight Ironlight NDS crankarm in 170mm. It's not even a hi-end part, but I have a bike where I think this crankset would look right.

For trade: what are you looking for?

truckface

03-27-14 09:06 AM

ISO: 650B touring wheelset. Something solid but not extravagant. 36h or 40h. Open to either freehub or freewheel.

Have:

- 700C wheels off an '83 Expedition: Specialized hubs laced to Super Champion rims. 40h rear, 36h front.
- 700C Deore / Sun CR18 wheels.
- Some other things that aren't wheels.

RaleighSport

03-27-14 09:09 AM

Quote:

Originally Posted by CO_Hoya (Post 16615111)

I've got a 3ttt stem in 130mm that looks like it would clean up nicely. Not exactly what you're looking for, I know.

Send me a PM if interested.

I might be able to help, PM me later so I remember to go measure.

seely

03-27-14 11:50 AM

Quote:

Originally Posted by BluesDaddy (Post 16615228)

I have a FC-M500 drive side with a closely matched Shimano non-drive side arm. No rings or bolts. Beater condition. Yours for the cost of postage.

Thanks, but I'm looking for something in relatively nice condition as the crank currently on the bike is nearly new, it's just hard for me to transition from a 180mm crank to 170mm between my bikes.

Bike Cottage

03-27-14 09:32 PM

Ny bike for the right Brooks

5 Attachment(s)

Have: Lambert Trophy approximately 1972 or 73 (pre-Viscount) 33 inch standover, 23 inch seat tube, 22 1/2 inch top tube, 27 x 1 1/4 wheels. All Lambert components with the exception of the Rear derailleur. Still has the original c-clip bottom bracket and I believe an early version of the Death Fork. Lots of stuff on the web about it so read up before PMing.

http://bikeforums.net/attachment.php...hmentid=371348 http://bikeforums.net/attachment.php...hmentid=371349 http://bikeforums.net/attachment.php...hmentid=371350 http://bikeforums.net/attachment.php...hmentid=371351 http://bikeforums.net/attachment.php...hmentid=371352

ISO: Black or Brown Brooks saddle, hopefully a Pro or something close to it in reasonable and rideable condition. PM with what you have and maybe we can do a deal. Thanks

anixi

03-27-14 09:37 PM

^That sure looks like a "DEATH FORK" to me. I'd be careful to make sure it's road-worthy...

crank_addict

03-28-14 11:56 AM

1 Attachment(s)

ISO - Shimano 600EX top cable feed brake lever hoods in brown. I know its getting silly for them new but if someone has decent used and kind enough to part with, I'm all ears'! I can get the new aftermarket in black only but prefer to keep the bike original. Pic of the nasty hoods >

http://bikeforums.net/attachment.php...hmentid=371437

unworthy1

03-28-14 03:03 PM

Quote:

Originally Posted by degan (Post 16576182)

ISO:
Front nuts and washer for a Gran-Compe NGC 400 brake caliper. Actually, I just need the one conical nut because I think I can get the other parts at loose screws. I believe a bunch of different Dia-Compe/Gran-Compe/SunTour brake calipers from the early to mid 80's used the same or similar nuts.
http://s13.postimg.org/5zo6hd4x3/IMAG0026.jpg
http://s10.postimg.org/jqhoahbc9/IMAG0027.jpg

I do believe I had one, might still...are you still in need of it? PM me if so and I'll search.

balindamood

03-28-14 08:02 PM

ISO:

- 1980's Campagnolo Super Record Front (braze on) and rear derailleur, and brakes (recessed nut) including levers
- 1st generation Campagnolo Record FD with the cable stop

Have:

Lots, what are you looking for??

many408

03-29-14 04:20 AM

Quote:

Originally Posted by gregaz (Post 16576890)

ISO: A single ferrule for Universal Mod. 77 brake lever (photo below). And some Universal brake hoods. I am hoping Cane Creek will work for the latter (posted an inquiry here), but the former ... I am at your mercy oh hoarders!

Have: What are you looking for? I have stuff! I have a firstborn!

If nobody comes up with one by next week let me know and I'll see if I can make a copy for you. I know I have some nice aluminium rod about the right diameter, but am busy this weekend and won't be back in the shop until Mon or Tues.

Looking for:

Birmalux rims, sprint or wired (as long as they macth each other)
Gian Robert Competition Front mech
Roto front mech
Cage for Benelux front mech
Weyless (old) 26.2 post, have 27.2 to trade

many408

03-29-14 04:36 AM

Have lathe, will turn.

I have a small metal lathe and can make small parts - screws, sleeves, etcetera. I'm not a machinist so the quality is more functional than exact-copy, but some here might be happy with that if the alternative is no part at all. Tell me what you need, if I don't have one to copy I'll need a pic and critical dimensions.

I'm looking for:
Birmalux rims (sprint or wired, as long as they match)
Gian Robert Competition front mech
Roto front mech
Cage for Bimalux front mech
Nice uk-made bars and stem to suit '59 Carleton
Nice french bars to suit late 70's Gitane

gregaz

03-29-14 11:47 AM

Quote:

Originally Posted by many408 (Post 16622152)

Thanks for the offer, but probably not worth the effort ... you can buy them on eBay for around $30, I was just trying to avoid the gouging. In the meantime, I went ahead and filed down some generic ferrules I had laying around, and used those. Since they're hidden under the hood anyhow, I am all good for the time being.

ricklp

03-29-14 03:03 PM

If this ends up as a double post some how, sorry.

I have a 36 hole wheelset that might be of interest, It consists of vintage rims (late 70's early 80's Mavic used in very good condition), brand new silver hubs (no name aluminum, sealed bearings, bolt on axles, and flip flop rear with sprocket and freewheel) and NOS stainless spokes with NOS brass nipples (15 gauge Sapim non butted Indian spokes).

Your Pinarello interests me.

Rick

Quote:

Originally Posted by buldogge (Post 16577178)

Have:
-Sugino Mighty crankset, vgc, 170mm, OE drilled rings, OE chainring bolts…very nice (also have the UN-54/115mm BB I used).
-Simplex Retrofriction shifters, mounted on clamp-on tube mount.
-1st Gen Suntour Cyclone GT RD
-1st Gen Suntour Cyclone FD
-Shimano 600 Arabesque FD
-Campagnolo Record 8s FD
-Campagnolo Athena 8s FD
-Campagnolo Record 10s FD, alloy.
-Campagnolo Daytona brakeset, needs pad holders.
-Campagnolo Centaur 10s DP brakeset…excellent condition
-Campagnolo Centaur 10s RD VGC
-Campagnolo Veloce, all alloy, 10s Ergos VGC (including Hudz "gum" hoods)
-Regal saddle, white, small corner scuffs, copper rails and rivets.
-Gipiemme CronoSprint seatpost, 27.0
-Athena 8s crankset VGC, typical light arm scratching
-'89 Pinarello Treviso frameset, nice paint, fresh decals, Shimano 600 headset, 57cm.
-Dura Ace 7400 stem, excellent condition, cap is present, 100mm
-Cinelli XA stem, excellent, 90mm

ISO:
-Single/Fixed Wheelset. 700c
-Campy Record OS 10s rear hub, 32H (or 28H as well)
-Campagnolo 11s bits
-Speedplay Zero pedals/cleats (new or lightly used cleats only)
-Fizik Aliantes/Spec Romin Evos/Spec Phenoms
-Quality 25c tubs (ie Vittoria Corsa CX)
-Deda Zero 100 DMP stems, 110 or 120, 86deg.
-???

TIA
-Mark in St. Louis

Ex Pres

03-29-14 05:56 PM

Alright, here's my next ISO:
8s Uniglide spacers.
I have a nice new DA UG cassette, but without spacers. It'll be a lot easier to find spacers than to grind a HG cassette, but I'm not gonna pay an ebay seller $40+ for them when I can buy either an HG or UG cassette cheaper.

For trade: I got lots o' mess. Whatcha need?

All times are GMT -6. The time now is 03:13 PM.

Page 482 of 614

482

Show 30 post(s) from this thread on one page