85 Andy Gilmour |85 De Rosa |85 Spectrum |91 Panasonic |92 Chesini |94 Vittorio |95 Batavus |95 Iron Horse |95 Reus |02 Calfee |02 Serotta |04 Serotta |06 Look |11 Meech |14 Red Star
Try again. I'm using this damned *** tablet!!!!
Have: Dura Ace first generation crank, 170 mm, silver.
Want to trade for same, 165 or 167.5. Silver or black.
Campy 8 speed rd, or pre 2001 9 speed rd.
120 mm cinelli 1a stem and 64-40 bars
Campy victory crankset
Suntour Accushift 7 speed barcons
Modolo speedy short reach calipers
Have: vintage Avocet 'touring' shoes, Model 30, size 8.5, very good condition.
Want: same, next size up which I think is 9.5, also good or better condition.
I have been trying out vintage shoes of this style, have some Bata Bikers which are okay. The Avocets seem a better design for my feet but this pair are too small. I recently bought them on eBay, little used, and have worn them on my basement trainer a few times, on a 'real' ride just a time or two.
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
Want: 600 Tricolor wheelset with silver rims, 7 speed/126mm spacing. The rims need to be silver rather than dark anodized (this rules out a lot, I know).I would *much* prefer a wider rim - if I do end up having them built it will be on a Sun CR-18.HG compatible freehub preferred, but UG is okay. Looking for vg condition, or better. Perfect bearing surfaces, light sidewall wear, etc.
Have: I've sold off a lot of my extra stuff, but I do have a black textured Rolls saddle, a 56cm "purple haze" Ironman Master frameset, and some odds and ends - feel free to ask.
197X Raleigh Grand Prix (beater) -- 1977 Centurion Semi-Pro (all-arounder) -- 1987 Schwinn High Sierra (dropbar conversion) -- 1996 Trek 930 (MTB) -- 2011 Jamis Coda (supercommuter)
Please cut me some slack; first non-bike item I've ever looked for here
ISO: working Schonstedt Magnetic Locator with case (if possible)
I have some bike parts, ect, to offer as bait
I have an Ideale saddle of unknown model and provenance, though it looks to be of very good quality. Copper rivets, thick leather, chrome frame. It's dry and stiff and has a few "pockmarks," but shows no signs of cracking anywhere. If I were going to ride it (which I still may), I'd soak it overnight in Lexol leather conditioner, which has totally rejuvenated many saddles for me, most of them in much rougher condition than this one. But since I'm offering it for trade, I'll leave you the option of using your own favorite restorative.
I'm looking for a set of 700C wheels suitable for a mid-70s Motobecane Grand Record. I'd prefer something French and reasonably age-appropriate, but might consider a Japanese wheelset of about the same era. Clinchers only! I stopped using tubulars in 1972 and have never reconsidered that decision.
If there's any interest I'll post some pictures tomorrow.
ISO: The entire bag of brightly colored shrink tube for electrical wires that has disappeared from the face of the earth in the last few days.
Have: severe frustration
Trade for some spiritual bliss?
..someday, there will be a day...
1984 Lotus Classique
1987 D'Arienzo (Basso) SLX
2004 Cinelli XLR8R2
2014 Wraith Hustle
2015 Wraith Paycheck (pending)
I am over bought on Schrader Tubes. I am interested in trading for a like number of presta valve tubes.
I have Blackburn 700 20-28. Kenda 700x28-32, Pricepoint 700 18-25. Would like to trade 4-6 tubes. Could do 8. looking for tubes 23-28, but could do 18-25 - standard thickness. Also have additional brands.
Also for trade. I have 4 presta valve 700x40-45. Will likely never use. Looking to trade equal number of 23x28.
Looking for 25 or 26T Dura Ace uniglide cogs both cassette and FW. Can trade NOS 22 or 24T.
Ritchey Vantage Comp rim.
26" 32h dark anodized.
Anyone have such a rim?
ISO: 9-speed Shimano cassette suitable for going up walls
Down tube cable stops for STIs
HAVE: 9S Dura-Ace corncob
ISO: Triple front derailleur, 28.6 clamp, bottom pull. Ideally XTR, XT, Dura-Ace or Ultegra.
Have: Seemingly everything else
Have a set of 7 sp Accushift barcons
ISO classic friction bar end shifters
EDIT: FOUND AND TRADE MADE
Last edited by CMAW; 06-11-14 at 03:25 AM.
Gearing up for first French-italian build.
In search of:
• Italian threaded BB w 118 spindle
• Atax/Peugeot/philippe stem and bars (prefer professional model, wider the better) I know these have kind of a dodgy reputation, so I'd consider any better quality, period correct french stem and bars
A variety of stuff-- some of the better things I'd consider parting with include--
• Campy Nuovo record front derailleur (3 hole variety)
• 3t bars and stem
• modolo flash brakes
• Nice Super Maxy crank
• Suntour v gt luxe Rear derailleur
• Shimano deer head front and rear
A good bit of other stuff too, so just ask if you have a match for my needs.
EDITED WITH UPDATED NEEDS/TRADE ITEMS
Last edited by mnmkpedals; 06-09-14 at 11:28 AM.