Have rsx 7spd brifters
Need mavic open pro/sport front wheel
Have rsx 7spd brifters
Need mavic open pro/sport front wheel
Last edited by josh s; 04-27-09 at 10:19 AM.
- Selcoff silver 27.0 x 220 mm seatpost. Very nice post in an unusual size that is hard to find. I bought it for a frame that I thought required a 27.0 post but it turned out to need a standard 27.2, so I haven't used it.
- Profile H2O threaded (quill) stem, 90 degree x 110 cm, black. Only used a few times. Removeable face-cap and longer quill that most stems, allowing a lot of rise for handlebars.
- Nitto rear rack, R-15, Campee or "big rack" models.
- Nitto Deluxe stem, 10 cm.
- Nitto handlebars, Noodle or B-177 or B-176 models, 44-46 cm wide.
- Touring wheels, 700c x 130 mm spacing, silver. To fit Shimano 9-speed cassette.
- Decent quality SPD pedals.
- Good quality, lightweight breathable rain jacket in mens L or XL (43 chest)
Last edited by tarwheel; 04-28-09 at 02:17 PM.
-NOS Araya Aero 2 polished, unmachined tubular rim, 32h
-NOS SR 74bcd 34t chainring
-Shimano 130bcd 48t chainring
-Shimano Dura Ace front brake, date code "ZK"
-Dia-Compe Power Control 7 flat bar brake levers
-Nitto forged "I-beam" style stem, 80mm
-Nitto Olympiade 115 bars, ~36cm wide
-alloy ergonomic drop bars, 25.4 clamp, 42cm wide
-1" threaded to 1 1/8" threadless adapter
-clip on aerobars
-Bianchi celeste water bottle cage
-Shimano "aero" toe clips, medium
-SR Sakae 27.2 seatpost
-Shimano Ultegra front hub laced to an American Classic rim
-Schwinn-approved Huret rear derailleur
-have a bunch of other parts, will add later
-130bcd 39t chainring, preferably unramped/unpinned
-1 1/8" threadless stem, 25.4 clamp, a lot of rise and as short of a stack height as possible
I'm looking for a 20" wheel BMX bike for my son for his 7th birthday. And I know nothing about such things, so I'll take some schoolin', too.
For completing my free Gios I still need:
1 Mavic MA40 rim (32h would be ideal, others considered)
27.2 mm seatpost
Suntour superbe front hub
I'm looking for Sante stuff in great condition:
I am especially looking for the cranks + chainring, brakes, headset, and rear hub.
Also, I need a 7-speed Uniglide cassette.
I have a lot of stuff to trade (mostly newish)
Last edited by Waychel; 04-27-09 at 06:18 PM.
Need an Ariake Nu Buck Aero saddle for my Panasonic AR-6000. Any leads appreciated.
Last edited by ZeRinger; 05-11-09 at 10:14 PM.
Founder, Panasonic Bicycles Virtual Museum
The Panasonics: Too many to list? /// The Pinarello: '00 Pinarello Paris
Mismatched open 4cd. Rear 36 laced to shimano tricolor 8 speed hub great condition little to no brake wear. Front 32 hole laced to mystery hub lots of brake wear. Will separate.
Mz14 32 hole Sun rims. All black hubs and spokes. rear has machined side wall. Hyperglide 7 speed cassette 13-30. Tires and tubes included.
Derailleur and shifters
Shimano 600 rd
Shimano 600 fd
Shimano 600ex clamp on fd
Shimano Altus rd, fd and shifters
Suntour downtube top mount shifters
Suntour Mountech rd
Suntour Bl (blue) rd, fd
Shimano Light action ? fd
Brake and Levers
Shimano 600 non aero levers
Dia Compe non aero lever
Dia Compe 500 g brakes
Ranndoneur Bars, Dia Compe levers with cane creek hoods, Sr Stem and wrap
Cranks and Pedals
Shimano 600 tricolor pedals
Exage sport crankset, 52, 42 biopace rings
Sugino Crankset with really heavy 52 and 42 rings
Shimano 105 Crankset logos polished off, 52 and 42 biopace rings
Shimano hyperglide cassette 8 speed 13-30
Shimano braze on front Derailleur for a double. prefer a 600ex
Axle for 126mm spacing 600ex hub.
Other interesting stuff.
i need a seatclamp binder bolt, campy clone or something of the like.
BikesDirect enjoys driving away repeat customers! Support your local shop!
I am looking for a replacement front fork for a Schwinn Sierra mountain bike. The current fork is rigid with dual eyelets, but it is tweaked. I would like to replace it with something that is cromoly with dual eyelets and ideally with a low rider mount.
It has a 1" threaded headset and if it were 1 1/8th I would just buy a new Surly LHT fork.
Wow... how'd the body get twisted? Did you do it? *gasp*
Crudge, man, now I have to go check mine.
ISO: six speed thread-on freewheel with 24T max low gear. Good condition.
ISO: 23" Peugeot UO-8/UE-8 Frame and Fork, Ugly is ok, but no major dents.
EDIT: OR a similar vintage lower end Motobecane or Gitane
Have: 21" and 22" UO-8 F/F's 21" is white and passable, 22" is blue and one of the nicest I have seen.
I need to get some of my parts collection onto a bike that fits me.
Last edited by redneckwes; 04-30-09 at 09:50 AM.
The last two bikes on my list are a 50's Lenton Grand Prix and a '64 Raleigh Record.
You'll have to speak to whoever sold the fake Rossin to Gilberto - it is the same derailer that was on it when he purchased it.
Ese dicho que me han dicho que tú has dicho que yo he dicho, ese dicho no lo he dicho, porque si lo hubiera dicho, ese dicho estaría bien dicho por haberlo dicho yo.
Glad to see you back gr23932, how was your move?
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
ISO - 36h Open Pro 4 CD rims (new or used)
170mm Shimano road double (600 pref.)
Let me know.
It's a broken record, but it's a good record.
Does anyone no where I can get a Velosteel coaster brake hub? They're made in the Czech Republic. Thanks!
anything in this photo, some info; the pedals are french thread, the crank is a maxi 171 length all alloy, 52/44 alloy rings, the old saddle is a favorit, derailleur nouvo record 74 date (missing bolt to attatch to derailleur hanger!) cinelli 3t abrosio ITM stems various lengths, seat post is just a steel thing by favorit, 26.2
a 36 hole cassette style hub that will accept a 10 speed shimano cassette, pref silver
a first gen front dura ace brake caliper to match this one:
Last edited by divineAndbright; 04-29-09 at 07:48 PM.
(2) 27.0 seatposts - doesn't have to be Campy, but not total junk. Of course, Campy would be great
several seatposts that aren't 27.0!
lots of odds and ends between Shimano, Suntour and some Campy stuff (nothing too high in the order though)
Shoot me a PM and maybe I have something that you can use!
Last edited by mparker326; 05-12-09 at 12:22 PM.
i need a pair of Time ATAC pedals, cosmetics not important as long as they function--willing to trade:
old raleigh (Phillips) 3 speed frame, and the parts that came on it minus the rear wheel, which didn't. fendeers, chainguard, brakes, cables, etc. all present. it's about 54cm, i'd say, black, kinda beat up, but solid, not bent or dented, just scratched etc.
frame and fork--schwinn step thru road frame, pink, 80's vintage, '86 - '88, i'd say. have headset and BB/cranks. disassembled. not sure what size (i'll measure it if yr interested) really good shape, a few scratches, maybe.
i have a few other odds and ends, too, nothing fancy.
and dough, of course, wanna spend $20-ish if i can help it.
d'Arte Board--a miscelleny of new art culture and commentary from 6 smarmy artists. click thru the image--