ISO and For Trade thread parts 2 and 3.
#2351
Senior Member
Join Date: Dec 2008
Location: Raw Leaf, Norf Kakalaki
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Edit: Now just need a shimano 600 tri-color crank in 172.5 or less length. Please let me know if you have one.
Last edited by lsdmt; 11-04-09 at 07:26 AM.
#2353
Old 55t Hammerman
Join Date: Jun 2007
Location: North Beach, San Francisco, CA USA
Posts: 47
Bikes: 1982 Colnago Mexico, 1990 Colnago Spiral Conic, 1971 Masi "Special" Pista, 1977 Colnago Super, 1982 Trek 560, 1981 Raleigh SC, 1985 Merckx GS, 1993 RB-1/8, 1993 X0-2, 1981 Miyata Gold Commuter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Trek 560 62cm ok?
LIKE PURPLE?
Got a nice 560 for ya!
62cm
Original Trek flattop fork with the Trek logo on it.
Original Black Tange headset
BB
I will get the SN so you can date it if you are interested, and I will take more pics.
Has the internal rear derailuer cable guided through the chain stay (Always liked that)
The Original paint is in darn good shape, no rust to speak of and the decals and head badge are ok..
NO DENTS
Got a nice 560 for ya!
62cm
Original Trek flattop fork with the Trek logo on it.
Original Black Tange headset
BB
I will get the SN so you can date it if you are interested, and I will take more pics.
Has the internal rear derailuer cable guided through the chain stay (Always liked that)
The Original paint is in darn good shape, no rust to speak of and the decals and head badge are ok..
NO DENTS
__________________
1971 Masi "Special" Pista, 77 Colnago Super, 81 Miyata Gold Commuter 1982 Colnago "President", 82 Trek 560, 90 Colnago Spiral Conic, 1994 Motorola Merckx , 2008 Surley LHT
1971 Masi "Special" Pista, 77 Colnago Super, 81 Miyata Gold Commuter 1982 Colnago "President", 82 Trek 560, 90 Colnago Spiral Conic, 1994 Motorola Merckx , 2008 Surley LHT
#2354
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,733
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,404 Times
in
1,205 Posts
ISO:
* Two 700C wheelsets, both 100 front & 126 freewheel rear. They can be different, but each pair must be a matched set. Prefer polished rims but a decent set of Wolbers or Mavics would work for me as well. Hubs can be Shimano or Maillard, or ? and would like skewers with them too.
* One 27" wheelset, 100 front and 126 freewheel rear. Gotta be polished rims. Again, skewers.
* Pair of matching 700C 32H rims. Not too particular about these but no chromed steel.
* Aero brake levers with nice hoods (color no issue)
* One set 6- and one set 7- speed Shimano indexed DT shifters (105, 600, RSX)
HAVE:
* Suntour Alpha 3000 34.9 clamp on FD, Alpha 3000 RD, 6 speed Suntour FW, Sugino crank (52/42 I think, but can check), Suntour 126 BB, DiaCompe brakeset, many mid-level saddles including white Vetta and white Turbo Vetta, Black/goldy yellow CODA, black/silver WTB. Other stuff.
* Two 700C wheelsets, both 100 front & 126 freewheel rear. They can be different, but each pair must be a matched set. Prefer polished rims but a decent set of Wolbers or Mavics would work for me as well. Hubs can be Shimano or Maillard, or ? and would like skewers with them too.
* One 27" wheelset, 100 front and 126 freewheel rear. Gotta be polished rims. Again, skewers.
* Pair of matching 700C 32H rims. Not too particular about these but no chromed steel.
* Aero brake levers with nice hoods (color no issue)
* One set 6- and one set 7- speed Shimano indexed DT shifters (105, 600, RSX)
HAVE:
* Suntour Alpha 3000 34.9 clamp on FD, Alpha 3000 RD, 6 speed Suntour FW, Sugino crank (52/42 I think, but can check), Suntour 126 BB, DiaCompe brakeset, many mid-level saddles including white Vetta and white Turbo Vetta, Black/goldy yellow CODA, black/silver WTB. Other stuff.
Last edited by rccardr; 11-02-09 at 12:11 PM.
#2355
Member
Join Date: Jun 2009
Location: SA,Texas
Posts: 46
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
I'm trying to piece together an 8/9/10 speed brifter/sti set. Specifically looking for rd/hubs/shifters etc..what ever I need for the conversion. I would prefer campy but dura ace will work.
Have:
Basically a brand new mix and match 7 speed freewheel campy group. Don't have time to take individual pictures but I've provided a link which highlights the group.
I'm willing to trade + offering other things pm me. I would prefer to use my current crankset but if you've got one I need 170. Also open to trading the Mavic Open Pros (new) tied to mavic 501 32h hubs.
**edit** the first pics show mavic gp4 with vittoria evo tub** those have since been taken off but are on the table too. Also the cinelli stem and cinelii 66 bar have been replaced and are on the table too.
https://picasaweb.google.com/re.world...eat=directlink
I'm trying to piece together an 8/9/10 speed brifter/sti set. Specifically looking for rd/hubs/shifters etc..what ever I need for the conversion. I would prefer campy but dura ace will work.
Have:
Basically a brand new mix and match 7 speed freewheel campy group. Don't have time to take individual pictures but I've provided a link which highlights the group.
I'm willing to trade + offering other things pm me. I would prefer to use my current crankset but if you've got one I need 170. Also open to trading the Mavic Open Pros (new) tied to mavic 501 32h hubs.
**edit** the first pics show mavic gp4 with vittoria evo tub** those have since been taken off but are on the table too. Also the cinelli stem and cinelii 66 bar have been replaced and are on the table too.
https://picasaweb.google.com/re.world...eat=directlink
Last edited by Tabularosa78; 11-03-09 at 11:39 PM.
#2356
Newbie
Anyone have a weinmann 506 sidepull??
Hi,
I am restoring my AD Olympian, and need one weinmann 506 sidepull brake. I dont'have much to trade, so you could pm me with what you are looking to get.
Thanks,
Ron
I am restoring my AD Olympian, and need one weinmann 506 sidepull brake. I dont'have much to trade, so you could pm me with what you are looking to get.
Thanks,
Ron
#2357
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 1,062 Times
in
787 Posts
ISO:
I'm trying to piece together an 8/9/10 speed brifter/sti set. Specifically looking for rd/hubs/shifters etc..what ever I need for the conversion. I would prefer campy but dura ace will work.
Have:
Basically a brand new mix and match 7 speed freewheel campy group. Don't have time to take individual pictures but I've provided a link which highlights the group.
I'm willing to trade +cash. I would prefer to use my current crankset but if you've got one I need 170. Also open to trading +cash the Mavic Open Pros (new) tied to mavic 501 32h hubs.
**edit** the first pics show mavic gp4 with vittoria evo tub** those have since been taken off but are on the table too. Also the cinelli stem and cinelii 66 bar have been replaced and are on the table too.
https://picasaweb.google.com/re.world...eat=directlink
I'm trying to piece together an 8/9/10 speed brifter/sti set. Specifically looking for rd/hubs/shifters etc..what ever I need for the conversion. I would prefer campy but dura ace will work.
Have:
Basically a brand new mix and match 7 speed freewheel campy group. Don't have time to take individual pictures but I've provided a link which highlights the group.
I'm willing to trade +cash. I would prefer to use my current crankset but if you've got one I need 170. Also open to trading +cash the Mavic Open Pros (new) tied to mavic 501 32h hubs.
**edit** the first pics show mavic gp4 with vittoria evo tub** those have since been taken off but are on the table too. Also the cinelli stem and cinelii 66 bar have been replaced and are on the table too.
https://picasaweb.google.com/re.world...eat=directlink
#2358
Back In The Saddle
Join Date: Mar 2005
Location: Pacific Northwest
Posts: 2,318
Bikes: N+1
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
Would anyone be able to lone me a Stronglight crank puller. I have a Stronglight 93 crankset that needs removing and being as I am out of work right now, I'm trying to save a few bucks.
I'd be willing to paying shipping to and from. Can anyone help?
Thanks,
Shin
EDIT: Thanks folks. I've got one on the way.
I'd be willing to paying shipping to and from. Can anyone help?
Thanks,
Shin
EDIT: Thanks folks. I've got one on the way.
__________________
In life there are no mistakes, only lessons. -Shin
In life there are no mistakes, only lessons. -Shin
Last edited by High Fist Shin; 11-04-09 at 12:03 PM.
#2359
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
I need a Sturmey Archer 12-splined cog, to fit the old 12-splined driver... 19, 20, or 21T would be good.
I have all kinds of cool stuff to trade, perhaps including exactly what you need. Well, maybe not, but the last couple guys got lucky.
I have all kinds of cool stuff to trade, perhaps including exactly what you need. Well, maybe not, but the last couple guys got lucky.
#2360
Senior Member
Just throwing this out there.
I've got a Campy 8 speed Record group (brifters, RD, FD, crank, brakes) and am looking to trade for Campy Super Record parts (RD, FD (braze on), shifters, brake levers, seatpost (27.0)).
Will split up/trade in groups, etc.
Seeing if anyone would be interested.
Thanks!
I've got a Campy 8 speed Record group (brifters, RD, FD, crank, brakes) and am looking to trade for Campy Super Record parts (RD, FD (braze on), shifters, brake levers, seatpost (27.0)).
Will split up/trade in groups, etc.
Seeing if anyone would be interested.
Thanks!
Last edited by Force; 11-03-09 at 04:02 PM.
#2361
Waiting for Summer !
Join Date: May 2007
Location: Sthlm , Sweden
Posts: 753
Bikes: E.Merckx Corsa extra PK Banken,E.Merckx Corsa extra TT,E.Merckx Strada,De Visini,Olmo Gentleman,Peugeot PA-10,E.Merckx Corsa extra Team Issue,Nishiki Olympic Royale,Nishiki Olympic
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
@force
are you splitting that up or want it all to go at one time ?
ISO:
the small part that could possibly be called the cable router ,inside the brake lever . for aero style campa levers
mine broke then fell out of the brake lever .
it slides infrom one side and has a sort of hook to keep it into place . here are 3 pictures of what i am searching for
PICTURE SHOW
These are chorus levers .
Cheers
/T
are you splitting that up or want it all to go at one time ?
ISO:
the small part that could possibly be called the cable router ,inside the brake lever . for aero style campa levers
mine broke then fell out of the brake lever .
it slides infrom one side and has a sort of hook to keep it into place . here are 3 pictures of what i am searching for
PICTURE SHOW
These are chorus levers .
Cheers
/T
#2362
Senior Member
Join Date: Aug 2005
Location: ontario
Posts: 2,234
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some stuff im currently looking for:
52/42 144bcd rings; any brand in useable condition, "nouvo record" style (something with extra webbings)
SR/Sakae royal crankset
80mm Cinelli 1a
1st gen Suntour cyclone front and rear derailleurs (for double, road short cage), vgx is ok too.
Suntour friction bar end shifters
32hole polished rear hub for shimano freehub, dura ace or ultegra works.
dura ace octalink BB 109/5 english thread.
Some stuff I have:
600 arabesque crankset 170mm
shimano fingertip bar end shifters
campy strada driveside arm no fluting 172.5 144bcd with 53/41 rings (big ring has wilier panto)
campy strada non driveside arm 172.5 black fluting
campy n.record rear derailleur (missing mounting bolt)
italian campy BB from 80s, not sure from which gruppo but its nice, great condition!
headset, same dealy as above, italian threads, some bearing indents on crown race, but still feels really smooth
campy seatpost for vitus style aluminum frames 25mm.
shimano 600 8sp sti shifters-white hoods kinda dirty
2nd gen dura ace road derailleurs, great cosmetic shape but rear derailleurs joints dont feel stiff as they should.
some campy front derailleurs
mavic sealed road headset
shimano 105 double crank with 175 arms
52/42 144bcd rings; any brand in useable condition, "nouvo record" style (something with extra webbings)
SR/Sakae royal crankset
80mm Cinelli 1a
1st gen Suntour cyclone front and rear derailleurs (for double, road short cage), vgx is ok too.
Suntour friction bar end shifters
32hole polished rear hub for shimano freehub, dura ace or ultegra works.
dura ace octalink BB 109/5 english thread.
Some stuff I have:
600 arabesque crankset 170mm
shimano fingertip bar end shifters
campy strada driveside arm no fluting 172.5 144bcd with 53/41 rings (big ring has wilier panto)
campy strada non driveside arm 172.5 black fluting
campy n.record rear derailleur (missing mounting bolt)
italian campy BB from 80s, not sure from which gruppo but its nice, great condition!
headset, same dealy as above, italian threads, some bearing indents on crown race, but still feels really smooth
campy seatpost for vitus style aluminum frames 25mm.
shimano 600 8sp sti shifters-white hoods kinda dirty
2nd gen dura ace road derailleurs, great cosmetic shape but rear derailleurs joints dont feel stiff as they should.
some campy front derailleurs
mavic sealed road headset
shimano 105 double crank with 175 arms
Last edited by divineAndbright; 11-03-09 at 04:09 PM.
#2363
Senior Member
Join Date: Jun 2007
Location: Chicago
Posts: 243
Bikes: '82 Trek 613, '83 Lotus Eclair, '86 (?) Yokota Ranger, '85 Schwinn Cimarron
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
need:
*2 36-hole double-wall 26" rims. I'm not particular as long as they're 36-hole and 2-wall.
*a tektro r556 front brake, or some other caliper I can use as a nutted rear brake with a reach of around 60cm. No mafac racers.
*I'm also looking for a road frame around 60-63cm of decent quality steel. Ishiwata, tange, reynolds, etc.
Have:
a honey brooks flyer (sprung saddle)-- used, with a few scrapes on the leather, otherwise great
campy c-record friction shifters
campy two-bolt super record seatpost 26.8mm
sugino sg-k 27.0 seatpost
sr laprade 25.4 seatpost
shimano 105 short reach (from a terry) brake levers with white hoods
SR road bars, standard road drop 35cm or 38cm width, can't remember which
sugino xd triple crankset, 48-36-26 chainrings, 170mm arm length, square taper
shimano biopace triple crankset (model fc-m730), 50-44-28 chainrings, 165mm arm length, square taper
lots of chainrings in almost every bcd imaginable, a good number of biopace ones.
new, never used tektro rl726 cross (interrupter) levers 26.0 clamp, can provide shims for 24.0mm bars
3 new, unused panaracer pasela 700c x 35 tires
4 unused 700c x 35-43 tubes
suntour cyclone gt (long cage) rear derailer- just disassembled and cleaned it, reassembled.
suntour cyclone front derailer 28.6 clamp- can shift a double or triple
new salsa brown gel cork bar tape
black jagwire brake housing (have a box, can cut whatever length)
front 27" wheel: suntour sealed bearing hub laced 4-cross to araya 1 1/4" wide rim with 2.0mm spokes
dia compe non-aero brake levers w/ slots for suicide levers
unused lowrider front rack: topeak rak mule
shimano sealed bearing BB 118mm spindle length, JIS square taper
shimano spd pedals-- pd-a525 range with sealed bearings
a jandd hurricane wedge saddlebag (waterproof)-- red, great shape
sachs-maillard ly92 8-speed freewheel
generic ergo drop bars 26.0 clamp area, 45cm wide
wtb mountain seat
*2 36-hole double-wall 26" rims. I'm not particular as long as they're 36-hole and 2-wall.
*a tektro r556 front brake, or some other caliper I can use as a nutted rear brake with a reach of around 60cm. No mafac racers.
*I'm also looking for a road frame around 60-63cm of decent quality steel. Ishiwata, tange, reynolds, etc.
Have:
a honey brooks flyer (sprung saddle)-- used, with a few scrapes on the leather, otherwise great
campy c-record friction shifters
campy two-bolt super record seatpost 26.8mm
sugino sg-k 27.0 seatpost
sr laprade 25.4 seatpost
shimano 105 short reach (from a terry) brake levers with white hoods
SR road bars, standard road drop 35cm or 38cm width, can't remember which
sugino xd triple crankset, 48-36-26 chainrings, 170mm arm length, square taper
shimano biopace triple crankset (model fc-m730), 50-44-28 chainrings, 165mm arm length, square taper
lots of chainrings in almost every bcd imaginable, a good number of biopace ones.
new, never used tektro rl726 cross (interrupter) levers 26.0 clamp, can provide shims for 24.0mm bars
3 new, unused panaracer pasela 700c x 35 tires
4 unused 700c x 35-43 tubes
suntour cyclone gt (long cage) rear derailer- just disassembled and cleaned it, reassembled.
suntour cyclone front derailer 28.6 clamp- can shift a double or triple
new salsa brown gel cork bar tape
black jagwire brake housing (have a box, can cut whatever length)
front 27" wheel: suntour sealed bearing hub laced 4-cross to araya 1 1/4" wide rim with 2.0mm spokes
dia compe non-aero brake levers w/ slots for suicide levers
unused lowrider front rack: topeak rak mule
shimano sealed bearing BB 118mm spindle length, JIS square taper
shimano spd pedals-- pd-a525 range with sealed bearings
a jandd hurricane wedge saddlebag (waterproof)-- red, great shape
sachs-maillard ly92 8-speed freewheel
generic ergo drop bars 26.0 clamp area, 45cm wide
wtb mountain seat
Last edited by tmoneygetpaid; 11-03-09 at 04:35 PM.
#2364
Senior Member
Join Date: Dec 2008
Location: Raw Leaf, Norf Kakalaki
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Need: Shimano 600 Tricolor crank with short (172.5 or less, shorter the better) arms.
Have: Money
Have: Money
#2365
Pro status
Join Date: Apr 2008
Location: Bremerton, Washington
Posts: 303
Bikes: many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have
dura ace 9spd bar end shifters
Sugino mighty Comp crankset, minus one dust cap. 171, 144bcd, 54/48 rings. I'll never use anything this size even though its beautiful.
SR MTS-100 stem, with mtb200 bars.
some chainrings, odds and ends
cash
Want
Nitto technomic, 80-90mm
silver mavic open-pro front wheel, 28-32 hole
????
shimano 600ex(abaresque) stuff
dura ace 9spd bar end shifters
Sugino mighty Comp crankset, minus one dust cap. 171, 144bcd, 54/48 rings. I'll never use anything this size even though its beautiful.
SR MTS-100 stem, with mtb200 bars.
some chainrings, odds and ends
cash
Want
Nitto technomic, 80-90mm
silver mavic open-pro front wheel, 28-32 hole
????
shimano 600ex(abaresque) stuff
Last edited by mtnwkr; 11-04-09 at 02:47 PM.
#2366
Senior Member
Join Date: Nov 2004
Location: San Jose, ca.
Posts: 1,326
Bikes: 2006 Orbea Volata, 84 Trek 760, 83 Trek 720,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO: Cheap Sidepull brake caliper (s) that have long reach of more than 60mm. Can be the cheap Shimano Tourney model of the late 70's or Dia-Compe models with equivalent long reach.
Have: Aero levers, Suntour RD/FD, Simplex shifters, Weinmann brake sets, Pump Clips, etc.
Have: Aero levers, Suntour RD/FD, Simplex shifters, Weinmann brake sets, Pump Clips, etc.
__________________
They call me "Mr. Mixte"
They call me "Mr. Mixte"
#2367
Senior Member
Join Date: May 2007
Posts: 703
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#2368
Bicycle Adventurer
Join Date: Oct 2008
Location: Portland, Oregon
Posts: 1,514
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Uhh... I am gonna go out on a limb and assume that I still need the nuts/bolts/washers for a SA 3-speed hub.
PLEASE, SOMEONE, HELP ME! I have a bike that's completely done, except for the gosh darn nuts and washers for the hub! EVERYTHING ELSE WORKS!
It's ridiculous. Someone lend me a hand.
-Nick
PLEASE, SOMEONE, HELP ME! I have a bike that's completely done, except for the gosh darn nuts and washers for the hub! EVERYTHING ELSE WORKS!
It's ridiculous. Someone lend me a hand.
-Nick
#2369
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,104
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Liked 372 Times
in
177 Posts
Uhh... I am gonna go out on a limb and assume that I still need the nuts/bolts/washers for a SA 3-speed hub.
PLEASE, SOMEONE, HELP ME! I have a bike that's completely done, except for the gosh darn nuts and washers for the hub! EVERYTHING ELSE WORKS!
It's ridiculous. Someone lend me a hand.
-Nick
PLEASE, SOMEONE, HELP ME! I have a bike that's completely done, except for the gosh darn nuts and washers for the hub! EVERYTHING ELSE WORKS!
It's ridiculous. Someone lend me a hand.
-Nick
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#2370
Waiting for Summer !
Join Date: May 2007
Location: Sthlm , Sweden
Posts: 753
Bikes: E.Merckx Corsa extra PK Banken,E.Merckx Corsa extra TT,E.Merckx Strada,De Visini,Olmo Gentleman,Peugeot PA-10,E.Merckx Corsa extra Team Issue,Nishiki Olympic Royale,Nishiki Olympic
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
#2371
Senior Member
Join Date: Mar 2009
Location: Houston, Tx
Posts: 323
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Need: A Campagnolo Record two-bolt 27.2 seatpost. Must be in good to great shape with minimal scratching - I am willing to polish it up a little though.
Dont have much to trade:
Two Sugino 130bcd chainrings - 50/39. Barely used and in excellent shape.
An SR Laprade style 27.0 seatpost. Rider condition.
A couple sets of NEW Shimano derailleur pulleys - good for older derailleurs with 10tooth pulleys.
One Campagnolo Superleggera pump head - NOS.
Dont have much to trade:
Two Sugino 130bcd chainrings - 50/39. Barely used and in excellent shape.
An SR Laprade style 27.0 seatpost. Rider condition.
A couple sets of NEW Shimano derailleur pulleys - good for older derailleurs with 10tooth pulleys.
One Campagnolo Superleggera pump head - NOS.
#2372
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
Cleaning out a bit....
ISO:
25.0 zero-setback seat post.
8-sp cassette
Sora 2x8 STI shifters
Ritchey Aero Road front wheel, black/black/black or rim only, 24h
56cm frame,
Panasonic DX3000,
Bridgestone RB2 or
Specialized Epic or Allez (steel or carbon)
Centurion Ironman, red or yellow or teal fade, maybe blue smoked fade...
Have:
Shimano 8-sp 600 tricolor STI group (STI 2x8 shifters, calipers, crankset, 28.6 FD, RD, STI housings, cable stops)
or...
Shimano 7-sp 600 tricolor group (DT 2x7 shifters, calipers, crankset, 28.6 FD, RD)
or....
add my Matrix dark-anodized 700c wheelset with 600ex hubs and Sante 7-sp freewheel to either...
or...
Shimano RSX 3x7 STI shifters with the above 7-sp group
Frames
60x62.5 Centurion Ironman Carbon frame set w/25.0 seat post.
58.5cm Diamondback Expert frame, 1995, 100% chro-mo, not one of the heavy ones.
FD's
DA 7400 FD, 28.6 clamp
Shimano 105 FD, braze-on double, the 8-sp version (light grey anodized)
Shimano 600EX FD, braze-on double
Black Suntour "Blaze" FD, 31.8 clamp
Shimano RSX triple FD, 28.6 clamp
31.8 clamp adapter for braze-on FD (polished)
31.8 clamp adapter for braze-on FD (carbon fiber)
RD's
Black Shimano Sora RD, 8-sp
Shimano RSX RD, long-cage, 7-sp, can go 8-sp.
Crank set/bb:
Dura Ace 7700 triple crankset with Italian bb (Octalink)
Bontrager Race GXP triple crankset with English bb (external cups, incl)
Sakae "Blaze polished double crankset (square taper) w/ball bearing Shimano English bb
Shimano 105 8-sp crankset (square taper) w/ball bearing Shimano English bb
Shimano Tiagra triple crankset w/English bb (Octalink)
BB:
Ofmega double, square taper, Italian (ball bearing)
Campy Chorus double, square taper, English, cartridge
Brake levers:
Black DC BRS "Blaze" aero levers with hoods
Stems
Cinelli 1R 90mm quill, "cinelli" on top, not the oval. pending
Nitto Technomic stem, 90mm reach, 80mm height
Cinelli 80mm stem, black logo on front, has been modified for slanted wedge nut.
3TTT alloy 120mm
NOS Cinelli 100mm, oval logo "cinelli milano" on top
Black Bianchi/ITM hollow quill, 100m
1" threadless adapter for 1" threaded steerers.
Seat posts:
Kestrel Talon aero seat post, dual-position, uncut.
Kestrel Talon aero seat post, dual-position, definitely cut, about 180mm now
27.2 alloy seat post, smooth, likely System Component, logo wore off.
Wheel sets:
Mavic Open CD wheelset, 700c, 8/9/10 rear, light grey, on 105 hubs.
Box section alloy 36-sp 700c set, 8/9/10, with puncture-resistant tubes and Turbo Al-Cond tires. (touring setup)
Matrix 700c wheelset, laced to Shimano 600ex hubs, dark anodized, with new 7-sp Sante cassette
Wheel or hub:
Ritchey Aero OCR rear wheel, 28 2x laced black spokes to black Ritchey hub, for 8/9/10
7-sp UltraGlide rear hub, 32-hole. (cassette also)
Saddle:
Avenir basic black, came on Diamondback.
Avenir World Sport, padded, exc shape
Nashbar women-specific, small model, like new.
ISO:
25.0 zero-setback seat post.
8-sp cassette
Sora 2x8 STI shifters
Ritchey Aero Road front wheel, black/black/black or rim only, 24h
56cm frame,
Panasonic DX3000,
Bridgestone RB2 or
Specialized Epic or Allez (steel or carbon)
Centurion Ironman, red or yellow or teal fade, maybe blue smoked fade...
Have:
Shimano 8-sp 600 tricolor STI group (STI 2x8 shifters, calipers, crankset, 28.6 FD, RD, STI housings, cable stops)
or...
Shimano 7-sp 600 tricolor group (DT 2x7 shifters, calipers, crankset, 28.6 FD, RD)
or....
add my Matrix dark-anodized 700c wheelset with 600ex hubs and Sante 7-sp freewheel to either...
or...
Shimano RSX 3x7 STI shifters with the above 7-sp group
Frames
60x62.5 Centurion Ironman Carbon frame set w/25.0 seat post.
58.5cm Diamondback Expert frame, 1995, 100% chro-mo, not one of the heavy ones.
FD's
DA 7400 FD, 28.6 clamp
Shimano 105 FD, braze-on double, the 8-sp version (light grey anodized)
Shimano 600EX FD, braze-on double
Black Suntour "Blaze" FD, 31.8 clamp
Shimano RSX triple FD, 28.6 clamp
31.8 clamp adapter for braze-on FD (polished)
31.8 clamp adapter for braze-on FD (carbon fiber)
RD's
Black Shimano Sora RD, 8-sp
Shimano RSX RD, long-cage, 7-sp, can go 8-sp.
Crank set/bb:
Dura Ace 7700 triple crankset with Italian bb (Octalink)
Bontrager Race GXP triple crankset with English bb (external cups, incl)
Sakae "Blaze polished double crankset (square taper) w/ball bearing Shimano English bb
Shimano 105 8-sp crankset (square taper) w/ball bearing Shimano English bb
Shimano Tiagra triple crankset w/English bb (Octalink)
BB:
Ofmega double, square taper, Italian (ball bearing)
Campy Chorus double, square taper, English, cartridge
Brake levers:
Black DC BRS "Blaze" aero levers with hoods
Stems
Cinelli 1R 90mm quill, "cinelli" on top, not the oval. pending
Nitto Technomic stem, 90mm reach, 80mm height
Cinelli 80mm stem, black logo on front, has been modified for slanted wedge nut.
3TTT alloy 120mm
NOS Cinelli 100mm, oval logo "cinelli milano" on top
Black Bianchi/ITM hollow quill, 100m
1" threadless adapter for 1" threaded steerers.
Seat posts:
Kestrel Talon aero seat post, dual-position, uncut.
Kestrel Talon aero seat post, dual-position, definitely cut, about 180mm now
27.2 alloy seat post, smooth, likely System Component, logo wore off.
Wheel sets:
Mavic Open CD wheelset, 700c, 8/9/10 rear, light grey, on 105 hubs.
Box section alloy 36-sp 700c set, 8/9/10, with puncture-resistant tubes and Turbo Al-Cond tires. (touring setup)
Matrix 700c wheelset, laced to Shimano 600ex hubs, dark anodized, with new 7-sp Sante cassette
Wheel or hub:
Ritchey Aero OCR rear wheel, 28 2x laced black spokes to black Ritchey hub, for 8/9/10
7-sp UltraGlide rear hub, 32-hole. (cassette also)
Saddle:
Avenir basic black, came on Diamondback.
Avenir World Sport, padded, exc shape
Nashbar women-specific, small model, like new.
Last edited by RobbieTunes; 11-08-09 at 08:36 PM. Reason: Updated
#2373
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 1,062 Times
in
787 Posts
Since there's been interest in Mavic, lately, here's a few things I have to trade:
1. braze-on FD (model 862, I think) with one small defect, also missing the plastic mounting washer that goes under the braze-on bolt
2. pair of braze-on retrofriction shifters (model 821, I think) plus one extra for parts,
3. pair or used pulleys for RD, teeth are eroded, but needle bearings still good.
here's the photo album:
https://s55.photobucket.com/albums/g1...MavicPulls_FD/
here's a few small pics:
1. braze-on FD (model 862, I think) with one small defect, also missing the plastic mounting washer that goes under the braze-on bolt
2. pair of braze-on retrofriction shifters (model 821, I think) plus one extra for parts,
3. pair or used pulleys for RD, teeth are eroded, but needle bearings still good.
here's the photo album:
https://s55.photobucket.com/albums/g1...MavicPulls_FD/
here's a few small pics:
Last edited by unworthy1; 11-05-09 at 02:43 PM.
#2374
Senior Member
trade pending
looking for:
italian threaded campagnolo nuovo record bottom bracket with the 115.5 spindle (post '76)
OR just the spindle
have to trade:
english threaded campagnolo nuovo record bottom bracket, 114.5 spindle (post '76)
english threaded campagnolo nuovo record bottom bracket, 112 spindle (pre '76)
italian threaded campagnolo C-Record bottom bracket, 111 length
$$
all are in excellent condition with no pitting. pics on request :-)
looking for:
italian threaded campagnolo nuovo record bottom bracket with the 115.5 spindle (post '76)
OR just the spindle
have to trade:
english threaded campagnolo nuovo record bottom bracket, 114.5 spindle (post '76)
english threaded campagnolo nuovo record bottom bracket, 112 spindle (pre '76)
italian threaded campagnolo C-Record bottom bracket, 111 length
$$
all are in excellent condition with no pitting. pics on request :-)
Last edited by delicious; 11-05-09 at 11:48 PM.
#2375
Senior Member
Join Date: Dec 2008
Posts: 659
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
HAVE: Mavic MA40 dark-anodized new-label 32-hole 700c clincher rim laced to a Shimano 600 tricolor front hub with skewer. Arrived NOS, has less than 10 miles on it so far. Only place for it is on my commuter, which doesn't need such a nice wheel.
WANT: Decent, but much less flashy, front wheel. 700c necessary, 36-hole preferred. Perfect would be a mate for the old label MA40 rim/Suntour Superbe hub I also have, but I'm not picky.
Also searching for:
Pedals, seatpost (27.2 mm), brake cable clips, appropriate for '75 Motobecane. Anything continental European is cool.
Kool Stop Continental brake pads.
WANT: Decent, but much less flashy, front wheel. 700c necessary, 36-hole preferred. Perfect would be a mate for the old label MA40 rim/Suntour Superbe hub I also have, but I'm not picky.
Also searching for:
Pedals, seatpost (27.2 mm), brake cable clips, appropriate for '75 Motobecane. Anything continental European is cool.
Kool Stop Continental brake pads.