rat fink

I might be able to help, but I need more info (size, type, spoke count, pic of the label, etc).

Fred Smedley

I have a complete NOS front wheel (27X1.25) on a wheel with less than 5 miles on it. My wife was using to escort the dogs to park across the street for a while

RobE30

I guess size would help.... 700c x 1.4cm (measured from inside lip to inside lip). Here's a picture of the label


That 27"er might work for a project in my mind.... (don't have it yet but I can day dream)

WJV

ISO:
Dual pivot standard reach brakes
Decent 170mm double crankset and english BB
Set o' fenders
Shorter 90-100mm stem (cinelli preferred)
Cane-Creek, or equivalent brake levers, the newer fatter ones
Broken Campy Ergo shifters: 9 or 10 speed; I recently rebuilt a pair and they run flawlessly so looking for another set for another bike
Campy C-record era (other models will work) 170mm left crank arm
matching silver 32hole 700c rims for clincher
6 speed freewheel
56-57cm frame/f with monostay rear
56-57cm American steel frame/f


Have:
Campy N.R. brakeset with flat levers
Campy N.R. brake levers, hoods are a little rough but still rideable
N.R. 36 hole front hub
Campy C-record clamp on front der.
Shimano 170mm 6206 triple crankset with bio-pace rings
Shimano Deore front and rear derailleurs (long cage), second generation I believe
2 Mavic 36hole GP-4 tubular rims, anodized gray
Brand new Dura-Ace 7900 front derailleur, clamp on
Brand new FSA SL-K light crankset and BB, 170mm
57cm Vitus 979 f/f pink
55cm Somec f/f

Most of the parts I am looking for are going to be powder-coated so the appearance is not overly important; I will be stripping and polishing them. I can get pics of anything. Cheers,

WjV

5cagm

ISO:
Aero Brake Levers of decent quality
Side Pull Brakes, standard reach, of decent quality

Have:
Shimano 600 (tri-colour) 7 Speed Downtube Shifters
Fizik Aliente Sport Saddle
Shimano 105 10 Speed FD bolt on
$$$

yellowjeep

Looking for a 165mm crankset. Sakae or similar. I have a Sakae 170mm crank set and a bunch of other parts for a possible trade.

champion city

For Trade:

GONE

Looking for:

FOUND

I know frame trades are expensive, but it can't hurt to try!

dashuaigeh

ISO: (in addition to stuff i posted a page back)
technomic deluxe 25.4 clamp, 110 or 100mm length
a 54ish cm frame for a conversion. preferably without DT bosses, and hoping for something classy/british-looking (with non raleigh bb threading!)
brooks b17

henriettahenry

Hi

I'm looking for a light blue Stan Pike frame. Somewhere between 52-55 cm range. I lost an eBay auction for one of these a year ago and I have yet to get over it, so I'm just going to
put it out there and see if anyone's got one they're looking to sell. What I'm after is pretty much identical to this chap's nice set up: https://www.flickr.com/photos/topcatj...rk/4258298110/ (I hope that it's ok that I post this link to give folks an idea)

I'd also be willing to trade my Zeus road bike with Campy dropouts/fork ends with Zeus Criterium/2001 components for a full set up, or partial trade for frame/components.

Thanks

junkfoodjunkie

Have:
27.0 fluted SR seatpost
Among some other things, but most of my stock is cleared out at them moment.

Need:
27.0 non fluted seatpost (aesthetics) Nothing fancy a Kalloy would do.

Thanks,
Jake

3373jones

Looking for

1 inch fork - chrome columbus steel would be nice. for a 57cm frame.

1 inch threaded headset - nice condition

have: some bike parts

20grit

Have
Dura Ace 7700 Braze On front derailleur
Want
Dura Ace 7700 28.6mm clamp on model

also have
Braze on shimano 105 double front derailleur, it's an older series, can't remember off the top of my head. sort of a greenish look to the annodizing
Campy Braze on Downtube shifters with cable guides. (I think they're some form of record from what i've seen)

Looking for
cinelli or 3ttt, non-panto'd stem with 26.4mm clamp. 110mm length and up
27.2 mm seatpost... 600/ultegra, dura ace, easton, etc.

BobHufford

PM sent ...

YoKev

Looking for used Bruce Gordon half clips, size small.

Titanium or Stainless, it doesn't matter...just so long as the price is attractive when compared with what they sell for on his site.

joe englert

Have: Campagnolo 1st generation c record rear derailleur excellent cond
Colnago toe clips (meatal toe clips with the clover on them

Trade: ********************????/

yellowjeep

Putting out feelers for a pair of Shimano aero brake levers. SLR-ish would be great.

rat fink

ISO: Dura Ace aero brake levers, or equivalent quality aero levers.

Have: lots of mid to high end road and mtb parts.

rat fink

Updated with pics!


Want:

- Quality threadless stems (need a few, varying clamp sizes) 110-120mm. Prefer -/+ 17 rise (something along the lines of a 3T Arx) condition not especially an issue.
- Nice aero brake levers (Dura Ace level or similar)
- 9/10s clamp-on 28.6 FD
- 26.8 setback seat post (prefer newer 2-bolt variety)
- Shimano SPD-SL pedals
- Road frame in the 48-54cm range
- Nice drop bar ~42cm
- Maybe brifters?
- Bottle cages
- Bar tape
- Other offers...


Have:

- Modolo quill stems, 90mm (black) and 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers (2 sets)
- Dura Ace 7400 non-aero levers (the early ones)
- rear Shimano 600 tricolor dual pivot caliper
- Shimano Exage dual pivot caliper set (tricolor-like finish)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Time Atac Alium pedals, no cleats
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Bar-end shifter adapter plug kit; (turns DT shifters into bar-ends), Dura Ace level
- Campagnolo C-Record retrofriction (just like Simplex) DT shifters
- Dura Ace cranks arms 180mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Shimano 105 Octalink cartridge double bottom bracket (BB-5500)
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- Shimano 600 32h rear freehub, 8-10s
- Mavic tubular front wheel; Mavic 401(?) 28h hub laced to Mavic Mach 2 CD 2 semi-aero rim
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Several Shimano road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Mighty 2-bolt setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.7 clamp, 120mm, -/+ 12 degree rise
- Ritchey WCS 4-axis stem: 31.8 clamp, 90mm, -/+ 17 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- King stainless cage

...and a few other things.



Most of the mtb stuff is Shimano Deore XT, some Deore, some XTR, and some Sram. A lot of the parts are new







Ultegra FDs, 105 RDs, C-Record shifters, bar-end kit, cable stops



Shimano 105 (5500) 32h 8-10s freehub and White Industries 32h 8-10s freehub (135mm spacing)



Ritchey WCS 90mm -/+ 17 degree 31.8 clamp stem and Felt 42cm ergo bar



FSA 26.8 seat post





If you have any questions, just ask!

buldogge

WTT: I have MKS EsQuartz M(edium) toe clips and would like to trade for MKS EsQuartz L(arge) toe clips (or even LL if they made them).

The ones I have are the black/bronze color but silver would be OK as well...

redxj

cudak888 

WANT:

57-62cm lugged touring frame of decent quality - must have canti posts and do 650B if possible. Repaint-worthy candidates definitely considered. No fork needed. Unknown brand? Even better.

HAVE:
Trade bait that you will like.

-Kurt

PaPa

I need handle bar & stem for 33-34 Schwinn Excelsior. Looks like this:



Lots of parts to trade

nlerner

Do the canti posts need to be set up for 650B wheels?

Neal

champion city

Oddly enough, I am ISO a complete campy Super Record shifter. Just the right one. Somehow I only have a complete left one.

I'm also looking for a few other Super record parts,(seatpost, brake calipers, front D) and a few DA 7400(8s DT shifters, headset) parts.

Have:
campy record track hub, 36h
nuovo record headset, DT shifters (clamp-on), and front derailleur (clamp on)
Super record clamp-on shifter band, no shifters included
2000's Campy chorus rear hub, 9-10-11 speed, 32h
Stronglight Delta headset, this is a roller bearing model.
VERY early campy bar-ends,
8s shimano 600 tricolor shifters
I've also got other goodies, don't hesitate to ask!

cudak888 

Yes. Either that, or a frame with no cantilever posts, which can accept 650B's and have canti posts brazed to it (would prefer to fiddle with a poor-cosmetic frame in such case). I failed to consider that when I first posted my ISO.

I'll be using a Kogswell P/R fork; it's unpainted, hence a repaint to match the pair won't be out of the question.

-Kurt