brian3069

ISO: 15 gauge or 1.8mm x 16mm spoke nipples. I'm trying to re-tension a set of wheel, some of the nipples are rounded off. No one in town has them. I only need about 15, don't want to buy a box of 100 if can be avoided.

Thanks!

scozim 

Building up a Univega Supra Sport (thanks Roger M) for my 15 yo:

ISO:
medium to long reach side pull brakes - 57 mm reach should work
26.6 seatpost

Have:

Suntour Suberbe drilled non-aero levers - need some sanding and polishing for scratches
Maillard circa 1984 13-21 6 spd freewheel - english thread
Shimano Tourney and Dura Ace center pull brakes
Suntour clamp on cable guides for above the bottom bracket on downtube

For trade to PNW folks:

I have an early 80's Motobecane mixte frameset (lots of scratches and chips) in pearl white and measuring 51 cm with an English thread bb. I also have a half Scott Sawtooth mtb that my kids didn't want - I got it with stem, frame, wheels, freewheel (in nice condition) and added a flat bar, Altus rear derailleur and a front derailleur. I would really prefer not to ship either one as it seems to be cost prohibitive for what the bikes are - but I could arrange for drop off (especially in the Seattle area - or in the Boise area next week). Let me know if you'd be willing to trade for something.

toosahn

ISO:

-Large steel frameset (57-62cm top-tube, 60-65cm seat-tube), semi-complete, or complete. Must have a nice set of tubes (Columbus SL, 531, etc) and nice lugs. Nothing too fancy, as this would be a daily rider.

-Nice, silver 27.2mm seatpost that's at least 25cm long.

-Quality quill stem that is at least 80mm long in the quill. Looking for something from Cinelli with 26.4mm bar-clamp, but open to other bar-clamp diameters. Also, a stem and bar combo would be a plus.

-Good set of platform pedals. Looking for something like Lyotard Berthets or Sakae SP-11s. Or campy triomphe style as well.

-Set of nutted brake calipers (non-recessed).

Have:

-EDCO Competition Bottom bracket. Great condition.

-Avocet RS saddle

-Avocet seatpost

-Shimano 600 pedals, recently repacked with clips and straps.

-Campagnolo Moskva 80 rim laced to Shimano 600 hub

-NISI HR22 rim laced to Campagnolo hub, and double butted spokes

-Regina Extra BX 6sp freewheel

frenchbikefan

well just found these. I wish I could go back in time and stop the guy I bought all this stuff from from ripping apart these classic bikes.
- phillips cottered spindle serial number 3900437 and marked 6-71
- also just the adjustable side of a brampton bottom bracket with lockring
if anyone is building a classic british bike let me know!

Fred Smedley

Have Brooks B67 in honey and VGC.
Want Brooks Swift or Pro, WTB SST or Devo. Eight speed 32-11 or 12 Xtr or Xt or 70 cassette. MTB tires like ?

rhm

I'm looking for Brooks/Wrights/Ideale or similar saddles with ruined leather. I need the frame and the nose pieces (there are three pieces in the nose); I am learning to replace the leather.

MetinUz

ISO 36 or 24 hole Shimano freehub, 130mm road spacing. 25.0mm seatpost. Have lots of stuff to trade, just ask.

THEJAPINO

ISO: 600 front hub 32h (6400)

Have: Diacompe aero levers, 3T Evol hinged stem 120mm, 90* chromoly quill stem w/ 25.4 80mm

RoboIsGod

ISO: Small track bike for a lady friend trying to get into track racing. She is about 5'1" and needs something like a 45-49cm bike - ideally nothing with a top tube bigger than 51cm. If you've got anything like this please let me know!

RobE30

Any stipulations as to frame material? The shop I work at has a bunch of track frames laying around....

frenchbikefan

I have the single ugliest track bike frame in the world that I would let you have.

realestvin7

Any of them vintage-y.

Puget Pounder

I am curious as to how ugly this is.

23skidoo

+1

frenchbikefan

I've posted it on the forum before. Its my smith pro virus

cazoo

The light is gone. Thanks!

rccardr 

HAVE: 3TTT stem, 25.4 clamp, 110 length
Nitto technomic stem, 25.4 clamp, 100, TALL
Cinelli stem, either 26 or 26.4 clamp (don't have any that size so can't tell), no plastic wedge, 120 length
Shimano 600 Tricolor crankset, 53/39, 172.5
Shimano 600 Tricolor FD, braze-on
Shimano 600 Tricolor RD
Shimano 600 6200 series braze on FD
Shimano 105 1050 series braze on FD (also have 28.6 clamp), RD and 6 speed DT shifters
New Shimano non-aero brake levers with new gum hoods

ISO: Nice 90 or 100 stem with 25.4 clamp OR a 26 or 26.4 w/a set of drop bars to go with it, something polished and classy. It's for a Merckx.

frenchbikefan

ISO
160mm cranks

have:
172.5mm Shimano 600 FC-6400 cranks

4Rings6Stars

Have: Honey Brooks Professional (maybe 200 miles on this, bonus is that the first few were from Nlerner!)

Want: Fizik Antares, Near new, basically any color would do. (Longshot I know)

irvri

Lets try this again! Need these pieces asap.

ISO:
Campagnolo Chorus Crankset 170mm (early 90's)
Campagnolo Chorus English BB 111 spindle? (early 90's)
Campagnolo Chorus Rear Derailleur 8 spd (early 90's)

HAVE:
Campagnolo Chorus Crankset 175mm (early 90's)
Campagnolo Chorus Italian BB (early 90's)
Campagnolo Chorus Headset
Campagnolo Chorus Front Derailleur Braze On
Campagnolo Veloce Rear Derailleur
Campagnolo Record 8spd Hubs + Mavic Clincher Rims
Suntour Superbe Parts
Other things
Etc

speedevil 

Looking for small-ish steel frame (50cm or close) for a road bike build, or an older complete bike for recondition/restore project. Lugged or not is fine, lugged is preferred if I have a choice. Will probably use 105 components on a frame, probably the original components on a complete bike. I've considered Soma ES or Salsa frames. For a complete bike I've looked at Trek 520, Fuji America, Allez steel, Miyata 7xx/9xx.

Thanks in advance.

dashuaigeh

Build time, and I'm trying to build these up with silver parts and compact gearing, but have only black parts. So...trade lists!

------------------- Have --------------------

- Tektro black dual pivot calipers R580
- FSA Vero 172.5 compact crankset (fairly new, ridden under 2 months)
- Dura-Ace hidden bolt stem (130mm)
- Shimano 600 tricolor 7sp groupset (wheels, headset and all)
- Brooks leather grips (https://www.universalcycles.com/shopp...s.php?id=16308)
- 105 wheelset w/blue anodized Nova rims

-------------------- Want --------------------------

- 110 BCD 50/34-36 chainrings.
- Silver dual pivot brakes
- Nitto Noodle 42/44cm bars
- Silver colored cassette wheelset, 130mm spacing, 9 speed
- two BBs (sealed pref), one 68x123mm and the other 68x118

Bikedued

ISO: 26 inch fenders. Silver SKS preferred, but any silver fenders will do. Also prefer a square profile if they even made them? Pretty much anything non Zefal if old school. I had a bike with that brand, and wasn't satisfied with the quality,

Also ISO: Long shot I know, but a front/rear set of higher quality (hopefully modern) cantilevers. Avid, Origin8, pretty much anything you got. I have the old style Shimano with the plastic spring cups, and while they do work, they're just not up to par for the build. I have levers already, just need the canti's and the straddle setup.,,,,BD

Both items will be on my 1985 Sierra project. I just "finished" it today, but a lovely Tropical Storm prevented the test ride.

cyclotoine

Not sure if this has been said, but there is no such beast unfortunately.

rivas7200

Need:
-Suntour 5 or 6 speed freewheel, my friend finds it hard to push the corncob he currently runs so I am looking for something more easier on the legs.
-bullhorn bars, preferably cheap

Want:
-campagnolo dust cap for Nuovo Record cranks (need only one)
-aero brake levers
-and for my stuck campy seatpost to come out with minimal damage

Have:
-Shimano 600 crankset 56-39or40
-corncob Suntour 6spd freewheel 13-18