ISO and For Trade thread parts 2 and 3.
#7903
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 17,229
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
ISO:
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset
Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.
---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)
Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18
Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset
Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.
---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)
Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18
Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.
#7904
Banned.
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times
in
908 Posts
So, I'm moving across the country and need to get rid of most my bike stuff. I'm not concerned about trading my stuff for stuff of the same value, I'd just like to trade for things that I need. It's going to be tight moneywise getting out there, so if I can get my bike finished using little to no actual money, that would be great.
What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.
What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.
I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?
What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.
What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.
I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?
#7905
Unimatrix Zero
Join Date: Sep 2009
Posts: 944
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hopefully someone has a use for some of these things...
HAVE:
- Gipiemme Crono Sprint crankarm (170mm) w/ 52 & 42 rings (drive side only)
- Gipiemme Sprint 510 Brakeset (calipers and levers w/ black modolo hoods)
- Modolo Resin Downtube Shifters
- Selle San Marco Laser Saddle, black - great condition
- Nitto flat bar, 25.4, 5 deg sweep, cut down
- NOS Bike Ribbon "Maya" crazy (colorful) bar tape
- ITM 90mm stem
^pics of anything upon request.
ISO:
- 165mm crankarms, 144bcd
- a black functional concor or brooks pro, cosmetics not important.
- a front rack
- saddlebags
- porteur-style bars, maybe, or some shallow drops?
email or PM is good, thanks!
HAVE:
- Gipiemme Crono Sprint crankarm (170mm) w/ 52 & 42 rings (drive side only)
- Gipiemme Sprint 510 Brakeset (calipers and levers w/ black modolo hoods)
- Modolo Resin Downtube Shifters
- Selle San Marco Laser Saddle, black - great condition
- Nitto flat bar, 25.4, 5 deg sweep, cut down
- NOS Bike Ribbon "Maya" crazy (colorful) bar tape
- ITM 90mm stem
^pics of anything upon request.
ISO:
- 165mm crankarms, 144bcd
- a black functional concor or brooks pro, cosmetics not important.
- a front rack
- saddlebags
- porteur-style bars, maybe, or some shallow drops?
email or PM is good, thanks!
Last edited by whatwolf; 02-05-12 at 10:27 AM. Reason: updated
#7906
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,701
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Have: Shimano 5501 105 long cage rear derailleur. 9 speed.
Want: Shimano Deore XT long cage rear derailleur. 9 speed.
Mine is a little scuffed up, yours can be too
Also have lots of other random vintage stuff, so if you have the XT but don't need the 105, I'm sure we can work something out.
Want: Shimano Deore XT long cage rear derailleur. 9 speed.
Mine is a little scuffed up, yours can be too
Also have lots of other random vintage stuff, so if you have the XT but don't need the 105, I'm sure we can work something out.
#7907
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,126
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 258 Post(s)
Liked 370 Times
in
176 Posts
ISO:
-Silver Sugino AT crank arms (don't need rings, but would take a complete crank too.)
-Deore XT front derailleur, 28.6 clamp (FD-M737 or similar... basically just looking for one with a black arm.)
-combo SPD/platform pedals
Have:
-Campagnolo Tipo hubs (or as built wheels - Mavic MA2 front / Weinmann Concave rear)
-Tektro R556 brake calipers, recessed and look brand new.
-SRAM X5 rear derailleur - perfect condition
-Other bits and bobs
-Silver Sugino AT crank arms (don't need rings, but would take a complete crank too.)
-Deore XT front derailleur, 28.6 clamp (FD-M737 or similar... basically just looking for one with a black arm.)
-combo SPD/platform pedals
Have:
-Campagnolo Tipo hubs (or as built wheels - Mavic MA2 front / Weinmann Concave rear)
-Tektro R556 brake calipers, recessed and look brand new.
-SRAM X5 rear derailleur - perfect condition
-Other bits and bobs
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
Last edited by mkeller234; 02-02-12 at 05:33 AM.
#7908
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496
Bikes: https://www.theheadbadge.com
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times
in
2,075 Posts
#7910
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,520
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
#7911
Unimatrix Zero
Join Date: Sep 2009
Posts: 944
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sofia
#7912
L-time Cat4 & proud of it
Join Date: May 2006
Location: NoVA for now
Posts: 173
Bikes: There's 4... 1 of ea
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I went and looked in the garage today. Found a pair of 3T Forge Ahead stems. I know one of em is 110 x 0 and the other's 120 x ??
Have a Cinelli 1E 110 stem and a 60mm something or another quill too.
Need: training 700c tires. 64-40 bar (26.4 is better), Mistral box-section rim etc
Have a Cinelli 1E 110 stem and a 60mm something or another quill too.
Need: training 700c tires. 64-40 bar (26.4 is better), Mistral box-section rim etc
#7913
Essentials Bike Works
Join Date: May 2011
Location: Huntington Beach, Ca.
Posts: 444
Bikes: Early 80 Celste Bianchi,Medici Pro Strada,Super Mondia,Cannondale Track Conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have: 42T Nuovo record chainring
Need: 52T Nuovo record chainring, other 144bcd chainring
PM me if you have this item or maybe know someone who is willing to trade.
-Harry
Need: 52T Nuovo record chainring, other 144bcd chainring
PM me if you have this item or maybe know someone who is willing to trade.
-Harry
#7915
Full Member
Join Date: Jul 2010
Location: San Antonio, Texas
Posts: 475
Bikes: 84 Coppi - 94 Hujsak - 82 Colnago Superissimo - 78 Ciöcc - 70's Galmozzi - 73 Lambert - 78 Motobecane Grand Record - 87 Peugeot Triathlon - 66 Peugeot H-40 - 78 Peugeot U08 - 85 Raleigh C-40 - 82 miyata 310 - 82 Univega - 85 Sterling SIS Mixte
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Liked 41 Times
in
14 Posts
ISO - non working Shimano st-6600 (Ultegra 10 speed) left STI. I need it for the base and clamp only.
HAVE
Ultegra 6500 triple crank - poor rings
Suntor Lite - front derailleur
Shimano Deore LX - front derailleur
Shimano Altus LT - front derailleur
Simplex SJA 102 with motobecane M under the Simplex type - front derailleur
Shimano SIS long cage - rear derailleur
Shimano 600 (1st) long cage - rear derailleur
3 TTT 60cm quill stem 25.4 very nice
UNO riser quill stem - 25.4 new
HAVE
Ultegra 6500 triple crank - poor rings
Suntor Lite - front derailleur
Shimano Deore LX - front derailleur
Shimano Altus LT - front derailleur
Simplex SJA 102 with motobecane M under the Simplex type - front derailleur
Shimano SIS long cage - rear derailleur
Shimano 600 (1st) long cage - rear derailleur
3 TTT 60cm quill stem 25.4 very nice
UNO riser quill stem - 25.4 new
Last edited by peugeot mongrel; 02-07-12 at 01:30 PM.
#7916
Senior Member
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Have:
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
dia compe aero brake levers
silver kalloy 26.4 seatpost (long, used, but good condition)
Want:
king bottle cage (iris)
look keo compatible pedals
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
dia compe aero brake levers
silver kalloy 26.4 seatpost (long, used, but good condition)
Want:
king bottle cage (iris)
look keo compatible pedals
#7917
Member
Join Date: Jun 2011
Posts: 31
Bikes: 81 Specialized Sequoia, 87 Wangel, 85 Specialized Stumpjumper, 86 Bridgestone Atlantis, 94 Yeti Pro FRO
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO: Suntour Superbe Brake Hoods, NOS or used in good condition is okay
Can't PM for now, my email is rrcmail2003@yahoo.com
Can't PM for now, my email is rrcmail2003@yahoo.com
#7918
Senior Member
Join Date: Jun 2009
Location: Chicago, the leafy NW side
Posts: 2,656
Bikes: 1974 Motobecane Grand Record, 1987 Miyata Pro, 1988 Bob Jackson Lady Mixte (wife's), others in the family
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 150 Times
in
74 Posts
ISO: Suntour Sprint/Sprint 9000 RD and shifters, already have FD.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, nicer shifters than Prestige (Retrofriction?)
Have: very clean Prestige, other bits.
For upgrade-but-still-French on Peugeot PX-10.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, nicer shifters than Prestige (Retrofriction?)
Have: very clean Prestige, other bits.
For upgrade-but-still-French on Peugeot PX-10.
__________________
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
Last edited by Chicago Al; 02-04-12 at 10:52 PM.
#7919
Senior Member
Join Date: Apr 2009
Posts: 308
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO WTT: campagnolo nuovo record/ tipo rear hub axle, either 120mm or 126mm spacing is fine; jockey wheels for NR/ SR rear derailleurs or just the little bushing that goes in the wheel.
have lots of campy bits/ parts and things...
have lots of campy bits/ parts and things...
#7920
Banned.
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times
in
908 Posts
ISO: Suntour Sprint/Sprint 9000 RD and shifters, already have FD.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, have very clean Prestige, other bits. For upgrade-but-still-French on Peugeot PX-10.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, have very clean Prestige, other bits. For upgrade-but-still-French on Peugeot PX-10.
Indexed, 7-sp, light. Beautiful calipers. You could probably swap the wheelset.
Was one of the wheels damaged in the accident?
#7921
Senior Member
Join Date: Dec 2009
Location: St. Louis, MO
Posts: 1,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have a pair...attached to a nice set of Sun CR-18s laced with DT Comps to SA hubs (off my Huffeigh). These things have maybe 10 miles on them. I would love to part with the whole shebang..or...if someone wants the wheels, I will let go of the tires separately!
#7922
Senior Member
Join Date: Dec 2009
Location: St. Louis, MO
Posts: 1,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
How about a set of Simplex SLJ GOLD...retrofriction shifters, FD, and RD...???
ISO: Suntour Sprint/Sprint 9000 RD and shifters, already have FD.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, have very clean Prestige, other bits. For upgrade-but-still-French on Peugeot PX-10.
Have: 105 SLK brakeset, 600 RD and shifters (will add model), complete Suntour GPX group, other stuff.
Looking to put 1986 Pro Miyata back to original or upgraded-but-still-Suntour. Because I'm a nerd, that's why.
Also ISO: Simplex 610 RD, have very clean Prestige, other bits. For upgrade-but-still-French on Peugeot PX-10.
#7924
Senior Member
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
update:
Have:
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
dia compe aero brake levers
silver kalloy 26.4 seatpost (long, used, but good condition)
26.6 thomson seatpost (for 26.6 setback post only)
Want:
king bottle cage (iris)
look keo compatible pedals
26.6 setback post
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
dia compe aero brake levers
silver kalloy 26.4 seatpost (long, used, but good condition)
26.6 thomson seatpost (for 26.6 setback post only)
Want:
king bottle cage (iris)
look keo compatible pedals
26.6 setback post
#7925
Senior Member
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times
in
447 Posts
Looking to help a friend find a seatpost. He has a gorgeous Frejus track bike. It is around a 1966 and has some Campy components but the seatpost is not the greatest. He wants to find something circa 1960's that is 27.0 and has decent adjustability.
I told him he could just sell it to me and then he wouldn't have to find a new seatpost, I could live with it. Well I thought it was a good idea.
I told him he could just sell it to me and then he wouldn't have to find a new seatpost, I could live with it. Well I thought it was a good idea.